Jump to content
SAU Community

Recommended Posts

Forgive the newbie question, but what's a reasonable price for an R32 GTR front bar and bonnet?

I got careless and bent the front of my GTS-4 - oops :P I've got a quote from someone local with a GTR half-cut (they are a straight swap, right?), but it's a bit more than I was hoping.

Any ideas?

On a positive note, this gives me a good excuse to get that respray :rant: Now to pick a colour...

Link to comment
https://www.sau.com.au/forums/topic/61109-r32-front-bar-and-bonnet/
Share on other sites

  • 2 weeks later...

Ok, we've sorted that out ($350-400 seems to be a good ballpark figure)...

But no one has been able to give me a definite answer as to whether an R32 GTR front bar will fit without modification onto an R32 GTS-4. Some people say yes, others say you have to swap the front guards as well.

Can anyone give a definitive answer, preferrably someone who has actually done it?

X

I am in the process of doing this now...

A GTR bonnet requires hinges and modifications to the latch (or a GTR latch support).

The front bar will not fit unless you trim the front bar support or source a GTR front bar support. They do need to be squeezed a bit to fit - so make sure you have it done at a workshop that has done this before to ensure that it will look good.

You then have the issue of no grille... To fit the grille, you need GTR headlights as there is clips on them which hold the grille in place.

Bonnet $450-700

Bar $380 - $650

grille $150 - $250

hinges $20 - $80

latch $free - $50

headlights - $150 - $600

I am in the process of doing this now...

 

The front bar will not fit unless you trim the front bar support or source a GTR front bar support. They do need to be squeezed a bit to fit - so make sure you have it done at a workshop that has done this before to ensure that it will look good. You then have the issue of no grille... To fit the grille, you need GTR headlights as there is clips on them which hold the grille in place.

Thanks for the info. Looks like I'll have to talk it over with the guy at the smash repairs. Whichever way I go, it's going to cost - but if the insurance is subsidizing the first few thousand then it might be worth it.

X

I am in the process of doing this now...

 

A GTR bonnet requires hinges and modifications to the latch (or a GTR latch support).

 

The front bar will not fit unless you trim the front bar support or source a GTR front bar support. They do need to be squeezed a bit to fit - so make sure you have it done at a workshop that has done this before to ensure that it will look good.

 

You then have the issue of no grille... To fit the grille, you need GTR headlights as there is clips on them which hold the grille in place.

 

Bonnet $450-700

Bar $380 - $650

grille $150 - $250

hinges $20 - $80

latch $free - $50

headlights - $150 - $600

mr r32

i put the gtr bar on with out modification

also if you change the front quaters you will need GTR blinkers

"You then have the issue of no grille... To fit the grille, you need GTR headlights as there is clips on them which hold the grille in place."

why spend the money on the lights when you could just custom make some clips or brakets for them? or just not have the grill and make it look abit different

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Here's the chart for fuel pressure vs. current draw, assuming your base fuel pressure is 3 bar and you run like 0.5bar boost on WOT, you should only momentarily hit 9amps here and there. (Ignore my prev post, I cannot read a chart these days it seems)
    • Those comp test results are not hideous. Whether they are accurate or not (ie, when that comp tester says 140 psi, is the real pressure120, 140 or 160?) is unknown to us. The state of the battery used to crank it over is unknown, etc etc. Many people around here would say that the absolute values and the spread are perfectly fine to just add boost and keep going. I personally would be happier with a narrower spread than that, but even the diff between 125 and 145 is not terrible. That one cylinder at 125 though, has probably copped some damage relative to the others. You should inspect the valves seeing as you've got it open. Do you know how to measure installed ring gaps? That, and an inspection of the rings themselves, is how you will determine whether they need to be replaced. If you're not good to do these things, take the block and the pistons and rings to a shop that is, and ask them for the go/no-go on them. Do the bores need a hone at all? If so, you might well be justified in getting some different pistons in order to get away from the ring supply problem. Whether you're happy to spend a lot more money right now, on more gear, rather than less money, but an amount that looks stupid given that you will only get a handful of rings in exchange for that money, is for you to decide.
    • also possibly backed up to my filler and shat down it! 🤣
    • Ok so i would love some advice here please, i purchased an R33 a few months back and its had a few mods done to the engine, its an RB25det running a Master ECU, 1200cc injectors, bigger turbo, oil cooler, oil filter relocation kit, Spool H-beam rods, acl/ross pistons. When i removed the motor from the vehicle (as its getting a respray) i thought i would compression test it and these are the following results. Cylinder 1-145psi, Cylinder 2-143psi, Cylinder 3-125psi, Cylinder 4-145psi, Cylinder 5-140psi, Cylinder 6-135psi this test was done with the motor on the ground and powering up the starter motor. I dropped the sump and found broken oil squirters on cylinder 3,5 and 6. I was told my rings are probably worn so i stripped the motor completely to get a new set of rings for it. The trouble is no one has these rings anywhere and they have to be custom made by Ross over in the states and will cost about $600+$200 delivery. My question is how can i tell if my rings are at fault and if they are still ok and is this price ok for a set of rings?
    • What sold me on Trailer Park Boys is this scene: Great stuff, just stay clear from the new Netflix production.
×
×
  • Create New...