Jump to content
SAU Community

Recommended Posts

Hey all,

The time has come. As of this Saturday, i will no longer require the VERY reliable services of my R32. I am going to London, and rather than leave the car to sit quietly in a garage for 2 years, I would rather it find a good home. Here are the details:

It's a 1992 R32 GTS-t

RB20DET with 118,000kms

Wine red

5sp manual with stock clutch (still feels pretty tight)

3" Exhaust from front pipe (dump pipe is stock)

Boost controler set at 12psi

Pod filter

R33 GTR Fuel pump

Stiffer shocks with King springs

camber adj. arms on the rear

Powder coated stock wheels (black, so doesn't show brake dust)

Type M Body kit

Speco Boost gauge on A-pillar

Apexi SAFC II will be sold with the car now...

Apexi Pen Turbo Timer

Full Viper alarm system

Stereo removed, but i will be supplying all sound gear i have with the car at no extra cost.

I also have an R33 GTR Front Mount Intercooler (in near perfect condition, no bent fins, no dents to the core or stock end tanks) and a HICAS lock bar for sale as extra items i never installed on the car. The buyer will have the option of taking the cooler and lock bar for a lesser figure than if sold to another party for $500 for both items.

All servicing work and mods have been carried out by ICE Performance in Cheltenham, Vic, including a new water pump, timing belt done, oils changed etc. But the alarm and timer were installed by Moorabin Autobarn about march this year. The car was just dyno'd and tuned at ICE 2 weeks ago, and managed a respectable 130rwkw on 12psi. It also received an oil change monday 18th Oct.

It also has some minor panel damage on the front right 1/4 panel, where it's been pushed in slightly, and there's a little paint lifting off next to the indicator because of it, but the dent should pop straight out. The kit on the car (i think it's a type M kit) is pulling away slightly, but a little glue won't hurt! Oh, and the passenger side air vent is broken.

It also has Vic rego until February 2005, and again, I WILL NOT be supplying a RWC with the car, and I'M NOT extending the rego, so please don't ask...

Due to me leaving this coming saturday, i will be taking the highest price offered. Do not waste my time with anything less than $11,000 as this has been an EXTREMELY reliable car to me, and the only major issue it has is the body work. But I do think the throttle position sensor is playing up a little as it's pretty hard to start cold.

Cheers.

Matt.

Link to comment
https://www.sau.com.au/forums/topic/61560-92-r32-must-be-sold-this-week/
Share on other sites

If you are genuinly interested in the car, please PM me, but rather than send out pics, i would advise you come and see the car in person, as it MUST be sold by this Friday....

I'm not selling the lock bar without the car. It's part of the deal.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The ATTESSA is functionally identical to R34; there were a bunch of JDM models that continued ATTESSA including Fuga/Q70, Skyline/Q50, Cima etc as an option. All with Auto only and I think mostly for snow regions. AFAIK there were no AWD VR30DDTT sold in Australia - it is on my to do list to check regs for racing a LHD car in Targa/ATR/AASA/CAMS events because if I can get the auto to work it would be interesting to run a 4wd car The Ecuteck TCM tuning is the same model as their ECU tuning, they already have it for R35 and Dose's favourite, BMW. You buy "points" to allow your computer to be tuned, buy either a bluetooth (phone app) or bluetooth+USB+Key (phone and PC) dongle, and pay for a tune that will be locked to your tuner ( ). You can also access the tuning software yourself but 1. it is mega expensive and 2. these computers have a billion parameters that intersect, so how could you ever spend enough time on it to get a decent result.
    • Or, is it a case of what it is like owning an R series Skyline? NFI what the previous owner has done or fiddled with... Ha ha ha After reading through this thread, I went on a bit of a research about the Q50/Q60. Now I'm quite intrigued by them! Is the AWD in them more like a WRX where it's always AWD, or is it more like the ATTESSA in the GTRs? By the sound of this TCU tuning, this sounds like a case of someone has made some real software for it, and you just need the right piece of hardware, and then you license that specific vehicle/TCU. Or is this a case of the software will be really expensive so only a few tuners have it, and you still have to pay a license per vehicle?
    • By popular demand.. it was a coil. Got my hands on 1 new OEM coil, replaced with the one that made the less noise difference when I unplugged it while the car was running and started the car up. No stutter and the engine light was gone. I guess I’ll buy the other 5 they have lol
    • No, code 21 is very straightforward. It can only be the things described in that diagnostic flow. In fact it has no way of knowing that the spark plug resistance is out of spec.
    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
×
×
  • Create New...