Jump to content
SAU Community

Recommended Posts

  • 3 weeks later...
  • Replies 52
  • Created
  • Last Reply

Top Posters In This Topic

most people already know my car, white, 77k, t78 set up, power fc, trust intercooler, 720cc injectors, aftermarke suspension, veilside andrew wheels, 18x10fronts 18x11rear, full ROLL cage, trust oil cooler kit,adjustable cam gears, tomei lumpy cams, oil filter relocation kit, z32 afm with hks pods, custom mount for oil pressure, boost, and ext temp gauges, turbosmart Eboost contoler , 5in monster tacho supplied, carbon fibre bonnet, v-spec front bar, custom plates JETT, comes with full nitrous wet kit, with brackets & bottle warmer, bosch 044 fuel pump, modified gearbox, os giken twin plate clutch, momo millenium steering wheel and gearnob, made 450alkw with 20psi and 50shot of gas, and currently is in position 10 for fastest 4wd above2.4l on www.hpi.com.au running 10.815  ( also supplied is a full set of slicks for the track)

looking to see what i could get for the car befor i decide to rebuild it for drag race only.

if anyones interested 0425239844 where any questions can be answered.

PRICE $48,000.00 ( $1000 discount for SAU members which will be donated to the forum)

When you ran a 10.8, how much power did you have at all 4 wheels and at what boost?

  • 3 weeks later...

come on guys, for all the people looking to buy a stock r32 gtr for 30k+ here is a perfect example of one mans loss is another mans gain. No need to spend any money on mods, everything is done and the car is ready for racing or just as a daily driver. 39K is cheap. must be someone with some money not every can be broke at the same time.

  • 1 month later...
  • 4 months later...
  • 2 weeks later...
Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • @Haggerty this is your red flag. In MAP based ECU's the Manifold pressure X RPM calculation is how the engine knows it is actually...running/going through ANY load. You are confusing the term 'base map' with your base VE/Fuel table. When most people say 'base map' they mean the stock entire tune shipped with the ECU, hopefully aimed at a specific car/setup to use as a base for beginning to tune your specific car. Haltech has a lot of documentation (or at least they used to, I expect it to be better now). Read it voraciously.
    • I saw you mention this earlier and it raised a red flag, but I couldn't believe it was real. Yes, the vacuum signal should vary. It is the one and only load signal from the engine to the ECU, and it MUST vary. It is either not connected or is badly f**ked up in some way.
    • @Haggerty you still haven't answered my question.  Many things you are saying do not make sense for someone who can tune, yet I would not expect someone who cannot tune to be playing with the things in the ECU that you are.  This process would be a lot quicker to figure out if we can remove user error from the equation. 
    • If as it's stalling, the fuel pressure rises, it's saying there's less vacuum in the intake manifold. This is pretty typical of an engine that is slowing down.   While typically is agree it sounds fuel related, it really sounds fuel/air mixture related. Since the whole system has been refurbished, including injectors, pump, etc, it's likely we've altered how well the system is delivering fuel. If someone before you has messed with the IACV because it needed fiddling with as the fuel system was dieing out, we need to readjust it back. Getting things back to factory spec everywhere, is what's going to help the entire system. So if it idles at 400rpm with no IACV, that needs raising. Getting factory air flow back to normal will help us get everything back in spec, and likely help chase down any other issues. Back on IACV, if the base idle (no IACV plugged in) is too far out, it's a lot harder for the ECU to control idle. The IACV duty cycle causes non linear variations in reality. When I've tuned the idle valves in the past, you need to keep it in a relatively narrow window on aftermarket ecus to stop them doing wild dances. It also means if your base idle is too low, the valve needs to open too much, and then the smallest % change ends up being a huge variation.
    • I guess one thing that might be wrong is the manifold pressure.  It is a constant -5.9 and never moves even under 100% throttle and load.  I would expect it to atleast go to 0 correct?  It's doing this with the OEM MAP as well as the ECU vacuum sensor. When trying to tune the base map under load the crosshairs only climb vertically with RPM, but always in the -5.9 column.
×
×
  • Create New...