Jump to content
SAU Community

Recommended Posts

im not sure if this is in the right section....

hey all i was just wondering.....

can the 'police officers'(in syd) know the status of ur licence by looking at ur plates of ur car??

i mean if so what can they see about u, does it have a picture of u on their lappys that they have on board on their patrol cars? or does it have just written details???

im curious cuz my friend was pulled over and they knew who he was w/o even asking his name??

did they just assume that it was him or does it have a picture on the screen when they type in ur details??

if anyone has more info?? feeback will be greatly appreciated

:P

Link to comment
https://www.sau.com.au/forums/topic/62398-police-and-licences/
Share on other sites

I dont know this for a fact but:

They can get rego details from their laptops. I dont see why they wouldnt they be able to pull up a photo of the registered driver based on that as well. This does not guarantee that that person is driving at a time though. If your name is not whom the car is registered to then there is no way they can look it up.

just to add to this, they cant see pictures of the driver, they know if your licence is suspended and they can find out every fine that you have recieved in the last 5 years, and basically any other information they need is o their compter except photos

unfortunatly some of the information posted above is incorrect.

here we go..... (talking abt NSW here)

when a 'transport' (rego check) is done via police radio any intell reports, events or warnings related to the vehicle stored on COPS (Computerised Operational Policing System) comes up straight away. this intell is basically information about any contact police have had with the car and persons linked to it or other things like sus activity and the like.

so, if the driver has been pulled over in the past, his information will be on the screen. then, its just one click away from his licence status. most of the time when you come into contact with police they enter a description into the computer about you. (hair, tattoo's etc) along with all offence details. (if u get pulled over by police, don't bother telling stories/lying you will only cause more headaches for yourself)

Next, (something you wont like) The Mark 2 MDT (Mobile Data terminals) fitted to many police vehicles show the owners licence details when a transport(rego check) is done on the car. it can also view ICOPS and RTA drivers licence photo's. (ICOPS photos are pics taken after you have been arrested :cheers: )

also wreckedhead, it is not limited to 5 years. I have seen information/charges right back to the early 90's.

something else that will be VERY handy will be trialed mid 2005. it is a vehicle mounted camera system that takes a photo of a vehicle registration plate and within SECONDS alerts if the vehicle is unregistered or the owner of the car does not have a current/valid licence. A second police vehicle up the road will receive this data and stop/pull over the car.

trials of this gear in canberra have proved that a LARGE parking lot is needed to park all the cars after they are picked up. so, expect to see these units parked on the side of major roads near you very soon.

ummm, many ways. does it really matter ?

LOL

My 2c I heard from a friend of a friend (you all know how it goes)

That they don't get the information up on their laptop, they have to radio back in to the station to seek the information and send it back to them.

A simple version of it all, but I think that's the correst principle.

LOL

My 2c I heard from a friend of a friend (you all know how it goes)

That they don't get the information up on their laptop, they have to radio back in to the station to seek the information and send it back to them.

A simple version of it all, but I think that's the correst principle.

nope, incorrect.

police mobile and portable units communicate (i.e get jobs, do checks etc) via VKG (police radio). not their station.

98% of the VKG operators are not actual police officers. they are classed as 'unsworn' officers.

the is no 'laptop' in the cars. it is called a MDT. some of the Mk2 mdt units are touch screen and the others have a keyboard and conventional LCD screen. the actual computer unit is located in the boot.

That they don't get the information up on their laptop, they have to radio back in to the station to seek the information and send it back to them.
I believe it was like this up until about mid 2004 when they all got the computer systems fitted in the cars.
ummm, many ways. does it really matter ?

i was just wondering, and i hear a lot of things about how police work from people that is sometimes hard to believe, (not reffering to you but u know what i mean..) so i was just wondering where u know all this stuff from you sound pretty certain about it all...

Are Police scanners still viable in NSW or has everything gone digital/encripted now with the MDT datastream? I believe only the local police stations back channels stay unencripted since it itsnt info sent thru the network.

Last interesting thing I heard on my scanner was the Marrickville Station getting a unit to do a KFC run before going back to base :rant:

Are Police scanners still viable in NSW or has everything gone digital/encripted now with the MDT datastream? I believe only the local police stations back channels stay unencripted since it itsnt info sent thru the network.

Last interesting thing I heard on my scanner was the Marrickville Station getting a unit to do a KFC run before going back to base :rant:

only a few channels have gone digital. NONE of the digital or analogue channels are encrypted and wont be for several years. (budget and coverage issues) [there are however tests underway for encryption.]

the radio system is totally seperate to the MDT(data) setup. (MDT's use telstra fleetcoms and telstra Data)

you can buy a digital scanner that will receive all the digital channels for under $800 ir $1500 for a 2nd hand Motorola XTS3000 portable (identical to the NSWP radios)

99% of police portable's do not have the DES-OFB or DES-XL encryption board installed. (OFB for digital and XL for analogue). only specialist units (SPG, OSG, drugs squad etc) are fitted with them. if you want to use encryption for a operation you need to request some additional radios. not really much point running encryption anyway as half the channels in Zone 3 on police radios are not listed in frequency guides and run digital, so 99.9% of people dont know they even exist or have the ability to listen to them)

unfortunatly some of the information posted above is incorrect.

here we go.....  (talking abt NSW here)

when a 'transport' (rego check) is done via police radio any intell reports, events or warnings related to the vehicle stored on COPS (Computerised Operational Policing System) comes up straight away. this intell is basically information about any contact police have had with the car and persons linked to it or other things like sus activity and the like.  

so, if the driver has been pulled over in the past, his information will be on the screen. then, its just one click away from his licence status. most of the time when you come into contact with police they enter a description into the computer about you. (hair, tattoo's etc) along with all offence details. (if u get pulled over by police, don't bother telling stories/lying you will only cause more headaches for yourself)

Next, (something you wont like)  The Mark 2 MDT (Mobile Data terminals) fitted to many police vehicles show the owners licence details when a transport(rego check) is done on the car. it can also view ICOPS and RTA drivers licence photo's.   (ICOPS photos are pics taken after you have been arrested :D )  

also wreckedhead, it is not limited to 5 years.  I have seen information/charges right back to the early 90's.  

something else that will be VERY handy will be trialed mid 2005.   it is a vehicle mounted camera system that takes a photo of a vehicle registration plate and within SECONDS alerts if the vehicle is unregistered or the owner of the car does not have a current/valid licence. A second police vehicle up the road will receive this data and stop/pull over the car.  

trials of this gear in canberra have proved that a LARGE parking lot is needed to park all the cars after they are picked up.  so, expect to see these units parked on the side of major roads near you very soon.

so the police officers can see what u look like b4 they approach the car?? with the new mk2 MDT????? are u sure ??? i mean i thought that they couldnt??

hahaha LimmYR33 you sound like your in the same boat as me mate, lost your license and trying to use your mates one, hahah i'm asian so i'm willing to risk it(wont get it back till july) us asian all look the same don't we? lol in this situation i wish we did LOL... well my gf think i look like the guy? even the guys mum say we look a like so i guess i can pass for him with a yobbo cop? ahaha

so the police officers can see what u look like b4 they approach the car?? with the new mk2 MDT????? are u sure ??? i mean i thought that they couldnt??

yep, I'm SURE.

I dug up some info for you guys

http://www.oit.nsw.gov.au/content/6.1.1.5.MDS.asp

here is a pic of the old MK1 unit (also the non digital Motorola spectra radio mic)

nsw_jim_0500.jpg

by the looks of the posts above a few seem to doupt what I am saying. so, if I can dig up a copy of a review done around 6 months ago in the NSW police news (NSWP Assoc Journal) on MDT's I will scan it in and post it up. if I can't find it, its just unlucky.

RB30-Power, in response to your post about officers looking up people that they are not supposed to. there is a section of the IT branch that is responsible for auditing the system. they can, and do rock up and ask you why you did a check on a persons details/vehicle etc. So, best practice is to jot down in your diary why you performed the inquiry. (everything is logged, they can look at your name on the computer and access everybody's registered number and time/date, method of enquiry etc. a 'registered number' is a police officers personal id number.

P.S apart from the article (if i can find it), I won't be posting any further info in the thread. Ive given plenty of info already.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • @Haggerty you still haven't answered my question.  Many things you are saying do not make sense for someone who can tune, yet I would not expect someone who cannot tune to be playing with the things in the ECU that you are.  This process would be a lot quicker to figure out if we can remove user error from the equation. 
    • If as it's stalling, the fuel pressure rises, it's saying there's less vacuum in the intake manifold. This is pretty typical of an engine that is slowing down.   While typically is agree it sounds fuel related, it really sounds fuel/air mixture related. Since the whole system has been refurbished, including injectors, pump, etc, it's likely we've altered how well the system is delivering fuel. If someone before you has messed with the IACV because it needed fiddling with as the fuel system was dieing out, we need to readjust it back. Getting things back to factory spec everywhere, is what's going to help the entire system. So if it idles at 400rpm with no IACV, that needs raising. Getting factory air flow back to normal will help us get everything back in spec, and likely help chase down any other issues. Back on IACV, if the base idle (no IACV plugged in) is too far out, it's a lot harder for the ECU to control idle. The IACV duty cycle causes non linear variations in reality. When I've tuned the idle valves in the past, you need to keep it in a relatively narrow window on aftermarket ecus to stop them doing wild dances. It also means if your base idle is too low, the valve needs to open too much, and then the smallest % change ends up being a huge variation.
    • I guess one thing that might be wrong is the manifold pressure.  It is a constant -5.9 and never moves even under 100% throttle and load.  I would expect it to atleast go to 0 correct?  It's doing this with the OEM MAP as well as the ECU vacuum sensor. When trying to tune the base map under load the crosshairs only climb vertically with RPM, but always in the -5.9 column.
    • AHHHH gotchaa, I'll do that once I am home again. I tried doing the harness with the multimeter but it seems the car needed a jump, there was no power when it was in the "ON" position. Not sure if I should use car battery jump starter or if its because the stuff that has been disconnect the car just does send power.
    • As far as I can tell I have everything properly set in the Haltech software for engine size, injector data, all sensors seem to be reporting proper numbers.  If I change any injector details it doesnt run right.    Changing the base map is having the biggest change in response, im not sure how people are saying it doesnt really matter.  I'm guessing under normal conditions the ECU is able to self adjust and keep everything smooth.   Right now my best performance is happening by lowering the base map just enough to where the ECU us doing short term cut of about 45% to reach the target Lambda of 14.7.  That way when I start putting load on it still has high enough fuel map to not be so lean.  After 2500 rpm I raised the base map to what would be really rich at no load, but still helps with the lean spots on load.  I figure I don't have much reason to be above 2500rpm with no load.  When watching other videos it seems their target is reached much faster than mine.  Mine takes forever to adjust and reach the target. My next few days will be spent making sure timing is good, it was running fine before doing the ECU and DBW swap, but want to verify.  I'll also probably swap in the new injectors I bought as well as a walbro 255 pump.  
×
×
  • Create New...