Jump to content
SAU Community

Recommended Posts

Hey all,

Looking at the R34, I've come across something which is pretty confusing.

From what I can gather there are numerous references to the 25GT and GTT.

From another site http://users.pandora.be/theskylinesundergr...specifications/ we see references to the GT, GT25 Turbo.

Now correct me if I am wrong, the 25GT = GTT = GT25 Turbo (What is the correct name?)

And the GT is a RB20DE

So there are only 2 turbo models, the GTR and the GTT/25GT/GT25Turbo.

??? headspinner ???

Link to comment
https://www.sau.com.au/forums/topic/62627-r34-different-models-confused/
Share on other sites

25GT-T is the correct name. It is the RB25DET Neo. This car is commonly referred to as the GT-T.

The 25 GT is the non-turbo RB25DE Neo engine. The common giveaway is the missing lower case 't' on the badge and the 3 gauges (boost, oil temp and battery level) in the centre console and of course the under bonnet differences.

There are both 4 door and 2 door variations of both but there is also a RB20DE 4 door that is the GT-X i think.

The last are the GTR's and of course the GTR Z-Tune which there are only 20 being made.

Hope this helps

The 25 GT is the non-turbo RB25DE Neo engine.  The common giveaway is the missing lower case 't' on the badge and the 3 gauges (boost, oil temp and battery level) in the centre console and of course the under bonnet differences.

If the 25GT is the non turbo, then why would it have a boost gauge?

Oh dear now Im even more confused! hahaha

So the 25GT is not the same as the GTT?

If the 25GT is the non turbo, then why would it have a boost gauge?

Oh dear now Im even more confused! hahaha  

So the 25GT is not the same as the GTT?

25GT is what the badge should say and shouldnt have a turbo or the three gauges. If it does have the three gauges a turbo and still has the 25GT badge, then its probably a custom job. Or, someones swapped badges.

There are ppl on the forum who have done the conversion quite well.

See the pics on my website to see what the badge should look like for the turbo models.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Ok i will get those 310mm. I found one but on a different site. This is the description on those...is it ok? Technical parameters: - Axle: front. - Disc type: ventilated. - Number of holes: 5. - Disc diameter: 310mm. - Total height with center: 54mm. - Thickness (new/min.): 30/28mm. - Designed for brake calipers manufacturer: Sumitomo.
    • You Gregged a whole racetrack!?
    • Look for broken wire or bad connector at the motor. Might not be it, but is worth starting there, as it is easy.
    • Hi everyone, I’m having an issue with my R32 GT-R. Sometimes, when the car goes over a bump or experiences some vibration, the 4WD warning light comes on the dashboard. When I check the code from the control unit in the trunk, it shows Code 19 – ETS Motor. However, everything seems to be working fine — if I turn off the engine and restart the car, the light goes away and everything functions normally. Has anyone experienced this before? Where should I start troubleshooting this issue? Thanks in advance!
    • I'm back from the dyno - again! I went looking for someone who knew LS's and had a roller dyno, to see how it shaped up compared to everything else and confirm the powerband really is peaking where Mr Mamo says it should. TLDR: The dyno result I got this time definitely had the shape of how it feels on the road and finally 'makes sense'. Also we had a bit more time to play with timing on the dyno, it turns out the common practice in LS is to lower the timing around peak torque and restore it to max after. So given a car was on the dyno and mostly dialled in already, it was time for tweaking. Luis at APS is definitely knowledgable when it came to this and had overlays ready to go and was happy to share. If you map out your cylinder airmass you start seeing graphs that look a LOT like the engine's torque curve. The good thing also is if you map out your timing curve when you're avoiding knock... this curve very much looks like the inverse of the airmass curve. The result? Well it's another 10.7kw/14hp kw from where I drove it in at. Pretty much everywhere, too. As to how much this car actually makes in Hub Dyno numbers, American Dyno numbers, or Mainline dyno numbers, I say I don't know and it's gone up ~25kw since I started tinkering lol. It IS interesting how the shorter ratio gears I have aren't scaled right on this dyno - 6840RPM is 199KMH, not 175KMH. I have also seen other printouts here with cars with less mods at much higher "kmh" for their RPM due Commodores having 3.45's or longer (!) rear diff ratios maxing out 4th gear which is the 1:1 gear on the T56. Does this matter? No, not really. The real answer is go to the strip and see what it traps, but: I guess I should have gone last Sunday...
×
×
  • Create New...