Jump to content
SAU Community

Recommended Posts

I have for sale a set of 4 Stern 17 inch rims for sale. These rims are 5 stud, 3 piece racing wheel, pretty sure they are 17x9. It was previously on a R33.

Does have rubber on them but the rubber is not in road worthy condition. Currently has 225-45 rubber on them but, but from what i have been told as well the current size of 225 on the rims are very under sized for the rims, so I asume that you could probably go thicker upto 265's, and at current you can see the damage on the tyres that indicates the tyres are too undersized for the rims.

These rims are great if you want to put some fat rubber on them and use them on track days. I am also pretty sure these rims are forged and 3 rims are in good condition, cause when i bought the car the rims had gutter damage, but in 2004 i had 3 of the rims rolled out and the gutter damage on the edges smoothed out. I want to get rid of these so I'm offering them at only $400 for the lot.

All you need to do is put some new rubber on them and have the edges on the 4th wheel smoothed out(you can have that done for about 60 bucks from Neways wheels). Otherwise the wheels are in good nic. If you have any questions feel free to PM me, I have no other facts about the rims as they came with the car when i bought the car. This is only a local sale within Melbourne as I do not wish them interstate as it would cost too much. I am in Craigieburn so those interested should come and check them out and pick up if wanted. My contact is 0431 645 055 if you want to have a chat regarding them.

PRICE: $400 (pick up only in Melbourne)

Link to comment
https://www.sau.com.au/forums/topic/64067-17-inch-stern-wheels/
Share on other sites

  • 2 weeks later...
Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
    • Yeah mate, never miss it.
    • Any going to watch World Time Attack at SMSP this year?
    • Appreciate the correction on the "ground", that will make a huge difference to looking at this. That makes complete sense about AF70/AF71 which is what I had come down to being the issue, one of these. I'll have another look in the ignition wiring when I get a chance next week. I'll also make up a jumper wire for running that AF73 test.  ECU is fine, relay itself is fine, pump harness is fine and the pump itself is fine. I am going to upgrade the Walbro 255 anyway with a DW300 I have since I need to replace the fuel sender and I'm going to upgrade the FPR with my chasebays kit ready for new plenum/injectors/dbw, but I'll get this working first. That's why this is so frustrating. 
×
×
  • Create New...