Jump to content
SAU Community

Recommended Posts

Well my first time back at wsid in about 8mths with high hopes and that's where it ended. My car is now running better than ever and once again I still couldn't grab a decent time, I feel like headbutting a brick wall :(

I did manage to get a new PB but only by literally a bee's dick.

1. 14.489 @ 94.84mph / 2.190sec

It felt nice and smooth, launch was the usual but for some reason I was -way- down on mph, I didn't even miss a gear :D

2. 15.265 @ 100.23mph / 2.737sec

First run after a 30min rain period. Absolutely no grip on the greazy track and simply bagged em up!

3. 14.145 @ 102.07mph / 2.167sec (<- new PB)

Tried to slam the gears harder, felt smooth once again and managed to get a new PB (old PB was 14.163 @ 100.20mph / 2.148sec).

4. 14.252 @ 100.87mph / 2.166sec

Once again was trying to work the gears hard but was slightly slower even though it felt just as good *shrugs*

5. 14.571 @ 98.02mph / 2.184sec

Used low boost this time (7psi) just for shits n giggles (even though high boost is only about 8-9psi haha).

As you can see my launches are pretty much spot on everytime (even though 2.1xx sec is not overly impressive atleast it's consistent). Sure I could grab some semi-slicks or even drag nitto's etc and probably shave off a tenth or 2 but I shouldn't need to when i'm making a solid 195+ rwkw. I'm a good 0.5sec off the pace of where I believe I should be (and the times others are doing in similar powered cars) and im stumped as to what it is (obviously it's the driver).

Was a great nite of racing (besides the rain periods). Some awesome cars about and probably the biggest meeting i've seen in a good 5-6mths. Wish I left my car in the carpark and spectated instead.

Link to comment
https://www.sau.com.au/forums/topic/64153-wsid-9-2-05/#findComment-1203612
Share on other sites

i only ended up getting 240RWKW

need to lower compression gonna get a steal head gasget, that will bring her up to the 290 mark.

im gonna buy some slicks soon, just gotta find out how to fit them without removing the brakes, 16" is the only size that can go on.

any1 know where i can get piks from last night??????

Link to comment
https://www.sau.com.au/forums/topic/64153-wsid-9-2-05/#findComment-1203992
Share on other sites

mods

td06 20G

Greddy Manifold

HKS 50mm External Wastegate

FMIC

Custom Plenum

550cc Injectors

600HP fuel pump

Nismo GMAX twin plate clutch

Power FC

Q45 AFM

KN Air filter

Sard Fuel Pressure reg

Coming

Head gasget

Forgies

Rods

Cams

Big F**K off turbo

Link to comment
https://www.sau.com.au/forums/topic/64153-wsid-9-2-05/#findComment-1204002
Share on other sites

i only ended up getting 240RWKW

need to lower compression gonna get a steal head gasget, that will bring her up to the 290 mark.

im gonna buy some slicks soon, just gotta find out how to fit them without removing the brakes, 16" is the only size that can go on.

any1 know where i can get piks from last night??????

Sorry mate as I've said several times in the past the 20g wont flow enough to make 290 its impossible, maybe some decent drag radials would be better then slicks as then you don't have to worry about the added cost of front runners

Link to comment
https://www.sau.com.au/forums/topic/64153-wsid-9-2-05/#findComment-1204051
Share on other sites



  • Latest Posts

    • If you mean the alarm immobiliser; theyre internal to the alarm itself which makes that difficult; I couldnt even see where he put it; its not in the same place as last time; but with all black wiring it might be very challenging to trace  I had someone turn the key for me as I know it only primes for a couple of seconds As my post above; I am getting no voltage to the pump at all; but I am testing continuity of the power line (SB) from the pump plug to the relay fine. As well as the negative from the pump plug to a 12V constant.    Yeah; he blammed the no start on a bad battery; said I needed to get a new battery and it'll start. Turns out the battery drained because the tail lights had been on for half the day during the install (the rubber cushion on the brake switch gave out while he was testing it as I have a picture of the car from that morning with the tail lights off..i've replaced that). The battery was turning over the engine just fine for a long time; but got low since lights were draining it so it was too low to test a start after he finished. I bought a new one on his advice...$250 wasted. My original battery charged up just fine and is healthy.    It was running perfectly fine when I messed up the old alarm (programmed out the remotes). He couldnt start it after removing the old alarm; my assumption is that when he unhooked it; he didnt bridge the circuit back when trying to start it. Its always been perfectly fine. The ECU swap and pump were 2 years ago. It's never missed a beat in that time. 
    • This is a big issue for me without the diff. I just have zero drive from the passenger side when drivers side has no traction. Bec's parents place has a crazy steep driveway with odd camber and I have never been able to get up. My bro-in-law's 130i with an (unknown brand) LSD gets up fine as does their dad's Hiace. My car stays at the bottom. We have other odd camber roads around here as we're elevated a bit and if it's raining I can get totally stuck around some hairpins. 
    • Yeah, I am super excited for this.
    • Was the car running before he touched the car?
×
×
  • Create New...