Jump to content
SAU Community

Recommended Posts

guys,

Heres some details:

1993

Fully built 4G63 (galant vr4) motor, 2litre using all HKS parts (pm me for details on the motor)

all work done at xspeed in myaree

autronics SMC engine managment

18inch ADR rims

6piston ALCON front brakes

Falken FK top of the range low profile tyres

3 HKS direct bright gauges

Blitz dual SBC (2 bar)

omp rally steering wheel

GT30R ball bearing turbo (600hp)

HKS gt2 60mm wastegate

king springs, koni adjustable shocks,

suspension has all new bushes.

full evo3 bodykit and evo3 copy fibreglass bonnet

Lots more that i cant think to list...........

Car made around 350awhp on about 1.4 bar of boost. The motor is built to handle 2bar safely. It also ran a 11.9 at 121mph on the low boost setting of 1.4 bar on 18 inch wheels and street rubber, with 1.9second 60 foot times, definatly a low 11 to 10 second package.

PM me if genuinly interested and i can forward on detailed photos

asking $35,000 FIRM with brakes or $30,000 without alcons.

Link to comment
https://www.sau.com.au/forums/topic/67969-fs-gsr-highly-modified/
Share on other sites

Private Sellers:

* If you have more than 1 item to sell, post them all in the one thread

* No EOI posts (expression of interest). If you post in the For Sale forum, then the item(s) is for sale.

* No posting on behalf of friends. If your friend wishes to sell something, tell them to join.

PS: Nice car I sold my GSR a few years ago for $22k with about half as many mods as this one, Id say your asking a good price however. Nice cars arnt they!

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • Yeah pretty impressive hey, good to see quality products not over-shooting their prices. That's what drew me to buy the hypergear turbo, just a shame I've never got the chance to see it in action
    • Thank you GTSBoy and MBS206 I have done the compression test with the motor out of the vehicle, reason for the test was to see if I needed to remove the head and do rings etc while its out. I'm in the process of respraying the vehicle and tidying up a few things. Story behind it all is I've just purchased the skyline and it was running when I got it, never drove it on the street though as I wanted to pull it down and do it all up again before registering it. the gentleman I purchased it from told me the motor has a forged bottom end and has a decent tune through it but I was going to pull the sump off anyway to see if it is a forged bottom end. that's why I thought id do a compression test beforehand. 
    • Man, I'm kind of amazed that the price of the turbo has not changed in 7 years. Everything else is inflating beyond reason, but not this? Good on Tao / hypergear I guess? Anyways, good luck with the sale!
    • I'm selling my brand new, in the box, never used Hypergear ATR45 - and I had some additions I paid for a few yrs back when I purchased it. Never ended up having the rest of the money to add all the mods at once, so I just ended up slowly selling each part. I originally had it internally gated, with the dump pipe, however I found it was incompatible with what I was going to use it for, so I contacted (I think Ken) from Hypergear, and he and I messaged back and forth & he got me to ship the turbo back, where they modified it & made it externally gated, and gave me the 5 bolt dump pipe attachment for custom welding. (Photos below) This turbo like I said has never touched the inside of an engine bay, it's completely brand new, never used, been sitting in the same box it arrived in, covered in plastic & all. Below are the photos of it: And while the guys at Hypergear were making it in-shop, they sent me some photos of the process: I'm looking at selling this just because I'm in need of the money right now, and don't have plans on modifying the 34 anytime soon - and from reviews & peformance sheets, this turbo had amazing results back when I was researching. The turbo was purchased in 2018 for $1.9k, with the mods I got added on. Looking at the website now, for the same turbo they sell (ATR45SAT), with the current addons it adds up to $1830 for the turbo Current addons included: - Bolted dump adaptor - Ball bearing CHRA - Braided oil feeding line So I'm looking to possibly sell it for around $1800, with shipping included in that 1.8k, It cost me around $120 to ship - so yeah thought I'd throw it out there and see if anyone was interested in purchasing. Cheers!
×
×
  • Create New...