Jump to content
SAU Community

Recommended Posts

BRAND NEW TURBO KIT FOR RB20/RB25DET

SPECS:


· T3/T4 .50compressor housing, .63 exhaust housing, 5 Bolt exhaust.

· (1) 90-degree and (1) 45-degree pipe for Downpipe

· Brand new 8.7Psi Wastegate

· Brand New Dual Type 50mm BOV

· Set of Turbo accessories

· One full set Oil Line and fittings

· Oil return Line kit

. Stainless (High mount) Manifold - STAINLESS with Lifetime Warranty

Price is $1500 + delivery.

Link to comment
https://www.sau.com.au/forums/topic/68763-500hp-turbo-kit-for-rb20rb25det/
Share on other sites

The AR's for this turbo are very common for upgrades to the R32 and R33 you will obviously find your car Cumming on to boost a bit later as it is a bigger turbo you might be sacrificing any where from 300 to 500rpm to what your stock turbo would come on to boost it can handle up to 20psi as well.

Thanks

What kinda lag wud u get with that on an rb20 and what boost levels are best through it?

The AR's for this turbo are very common for upgrades to the R32 and R33 you will obviously find your car Cumming on to boost a bit later as it is a bigger turbo you might be sacrificing any where from 300 to 500rpm to what your stock turbo would come on to boost it can handle up to 20psi as well.

Thanks

I know plenty of people using Master Power turbos and making big reliable power.

very similiar to XSPower....

Its the way you install the turbo, most people that buy these turbos are on a budget therefor they usually try and install the turbo themselves and theres your problem right there, there is alot of people out there that dont know the 1st thing about installing a turbo and are on a budget and try and install themselves to save a bit of $$$, they just think they can rip the old one off and slap the new one on.

Its the way you install the turbo, most people that buy these turbos are on a budget therefor they usually try and install the turbo themselves and theres your problem right there, there is alot of people out there that dont know the 1st thing about installing a turbo and are on a budget and try and install themselves to save a bit of $$$, they just think they can rip the old one off and slap the new one on.

Most turbos that die are due to poor quality turbos like XSPower

http://www.mx6.com/forums/showthread.php?t=110947

]

The Ebay seller you bought it off

http://cgi.ebay.com/ebaymotors/ws/eBayISAP...sspagename=WDVW

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
    • Yes sir am asking is there possible way from aem tuner from wiring pins 
    • Have you checked cam to crank timing and confirmed balancer marks are correct?
×
×
  • Create New...