Jump to content
SAU Community

Recommended Posts

An interesting read...

http://www.importbuilders.com/pistoncomparo.html

I went with wiseco as they appear to be quite common and proven in the rb30's.

It also made a big difference that my engine builder swore by them. lol

They also happen to be one of the lightest pistons.

But that said.. Wiseco and Arias are both very good pistons.

CP's and some of these others are also apparently good, I've personally heard on set of CP's that were very noisy in a CA18DET.

My engine builder uses these alot, on many different street & race prepped 4-&6cyl cars (including Skylines). I did a little research on these, didn't find anything to worry about.

2BNVS - My builder got these in Lilydale, Victoria. He paid $1100.00. I did a search in Google & and there is heaps of info on them & they should be available in NSW.

I was all for the Arias, cost wasn't really an issue, as they simular in price, but I was convinced by my engineer (had a first hand look at some of the engines he has built) & by a few people using these pistons & who had their engines built at the same place. Let's hope I made the right choice.

CP's and some of these others are also apparently good, I've personally heard on set of CP's that were very noisy in a CA18DET.

Mahle are pretty good pistons, as long as you get the clearances to the spec sheet provided everything will be fine.

CP's are very fine pistons, they require little clearances (much less than Arias or Venolia). Due to the low expansion/clearances required, if they were put in a motor and spec'd to "normal" forged pistons you'll have excessive gaps, and probably get a bit of piston slap.. as well as blow by and wear. I'd be pretty concerned/annoyed if I was the owner of that CA18.

I'd be pretty concerned/annoyed if I was the owner of that CA18.

Interestering you say that.

The builder is apparently the 'best' RB builder in SA, When choosing a builder for mine I threw a few questions at him and honestly had my doubts. So I went to some one else. :(

id stick with well known stuff for anything relating to a motor thats getting a forged bottom end.

no pint risking to save a few $$ and then be stumped later.

Arias all the way

Mahle is a lot better known around the world then Arias mate, thank Porsche for that. Infact Arias are probably cheaper.

Mahle is a lot better known around the world then Arias mate, thank Porsche for that.  Infact Arias are probably cheaper.

i was reffering to use in Skylines.

each piston would be different for the respective motor.

many RB's run arias

6 out of 10 Formula 1 teams use Mahle pistons. Thats a fair indication of their quality. Mahle is one of the worlds biggest piston manufacturers and supply F1, IRL, Nascar, WRC, V8 supercars etc.. as well as Mercedes, BMW, Porsche, Ferrari, GM, Ford etc.. They also own Cosworth Technology and ACL piston products.

They are a little dearer than most other pistons but quality costs money. Look at their F1 pistons, 19 500RPM, 15 000G when they change direction at that RPM and they stay together, thats a fair indication that they have it right.

Attached is a pic of their box-n-box design.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Kinda glad I never got to this ..    https://www.facebook.com/groups/1483859159195077
    • @GTSBoy This method was able to get readings of -10 to -2, so it looks like its monitoring.  Now I need to figure out why the vacuum on the line provided isn't alternating with manifold pressure.  I went with 2 lines that an RB25 tuner recommended but I'll get a longer hose and try directly off the back of the manifold.  He may have been used to OEM intake setups while I have a DBW setup that removed the MAF and IACV.  
    • I work at a car detailing and tinting shop called Quark which gets all manner of German cars in usually (mainly due to a contract with Mercedes Benz Kita Osaka, BMW Nishinomiya and others) but every once in a while something special comes in, like a fully restored 1972 HS30 Nissan Fairlady 240ZG... The shop owner had immediately started applying film to the windows as soon as it was in the shop so the interior was completely covered in towels and plastic sheets. But I could get a few photos of the engine bay which was restored like new. Such an amazing car to see in pristine condition in Japan these days.  
    • Was going to say the car pulls up nicely everywhere, especially going into that last long right hander before the main straight. Looks like a lot of fun.
    • Hey Dave, welcome aboard! Good to see another soon-to-be Stagea owner here. The wagons are awesome — plenty of space, still got that Skyline DNA, and loads of potential if you’re into mods. Definitely post up pics when you get it, everyone here loves seeing new builds. What model/year are you looking at?
×
×
  • Create New...