Jump to content
SAU Community

Recommended Posts

No where near as much as my mates 32gtr that has gone through about 5 motor and different turbo applications to achieve a low 10 sec pass.

Spend 5k on an XR6T and you could run 10 sec pass.

380rwkw

Auto

Diff gears

slicks

=10 sec pass

i spent 2 k on mine to achieve from 195rwkw to 300rwkw.

Also to the arguement that they are no good at track work,If you seen one set with the right springs and a manual trans and good driver they can mix it with most cars.

2K for 300rwkw? Gees that's hard to believe. An APS phase 2 kit cost at least 5K and they claim it delievers 330kw at the fly. So i'm guessing you'll get 270rwkw from that.

There's a guy on XR6T forum that does 11.5 1/4 miles and I'm sure he's spent at least 5K doing it up so 5K for 10 sec passes is hard to believe.

Don't you need to change injectors(1K+)

edit+tune (1K+)

There's already 2K.

But then again you are doing everything yourself so you are saving a fair bit of money whereas most other people just give the car to someone else for them to do the work. That's where the $$$ come into play.

  • Replies 129
  • Created
  • Last Reply

Top Posters In This Topic

Trust me.That guy is craig.His car is a weapon.As for mine it is full APS Phase 2 running around 360fwkw.

There is so many was to mod a T now it doesnt cost much money.

I just went to the airpowersystems site. Phase 2 is meant to be 330fwkw.

You must of bought the aps kit 2nd hand because 2K wont even buy you the phase 1 kit.

2K for 300rwkw? Gees that's hard to believe. An APS phase 2 kit cost at least 5K and they claim it delievers 330kw at the fly. So i'm guessing you'll get 270rwkw from that.

There's a guy on XR6T forum that does 11.5 1/4 miles and I'm sure he's spent at least 5K doing it up so 5K for 10 sec passes is hard to believe.

Don't you need to change injectors(1K+)

edit+tune (1K+)

There's already 2K.  

But then again you are doing everything yourself so you are saving a fair bit of money whereas most other people just give the car to someone else for them to do the work. That's where the $$$ come into play.

There is many Unichip computers on the market,Injectors are getting cheap to source second hand,The auto just needs a shift module fitted"$60" and a oil cooler to be a super positive shift and the exhaust isnt dear if you know what combo to run.

I just went to the airpowersystems site. Phase 2 is meant to be 330fwkw.

You must of bought the aps kit 2nd hand because 2K wont even buy you the phase 1 kit.

I am with FIST Performance in Brissy.APS 330fwkw claim is only a guideline and all cars perform to how they are tuned.Im running 11psi with stock intercooler.My injectors are running about 90% duty cycle.I could easily run 14 psi and up some more fuel with a $800 intercooler and achieve 360rwkw.If i wont more i up the injectors again.I then regear the final ratio with a MK 2 final drive out of a manual with some 17 inch rims and with the right conditons and a set of borrowed slicks 10 sec Qauters are there.

Check out APS 10.98 Phase 3 car

there is many cheap piggy back cpu conversions around so sourcing them with injectors and exhausts and intercoolers isnt hard or exspensive.The turbo is rated to 650 hp or close to it.So the XR6T is a tunable weapon and will more so be in the future as manufactures of parts jump at each other for the competition.

I work with all makes including alot of nissan skylines,200 sx,supras and anything else that has a turbo.

  • 1 month later...
  • 2 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Bit of a pity we don't have good images of the back/front of the PCB ~ that said, I found a YT vid of a teardown to replace dicky clock switches, and got enough of a glimpse to realize this PCB is the front-end to a connected to what I'll call PCBA, and as such this is all digital on this PCB..ergo, battery voltage probably doesn't make an appearance here ; that is, I'd expect them to do something on PCBA wrt power conditioning for the adjustment/display/switch PCB.... ....given what's transpired..ie; some permutation of 12vdc on a 5vdc with or without correct polarity...would explain why the zener said "no" and exploded. The transistor Q5 (M33) is likely to be a digital switching transistor...that is, package has builtin bias resistors to ensure it saturates as soon as base threshold voltage is reached (minimal rise/fall time)....and wrt the question 'what else could've fried?' ....well, I know there's an MCU on this board (display, I/O at a guess), and you hope they isolated it from this scenario...I got my crayons out, it looks a bit like this...   ...not a lot to see, or rather, everything you'd like to see disappears down a via to the other side...base drive for the transistor comes from somewhere else, what this transistor is switching is somewhere else...but the zener circuit is exclusive to all this ~ it's providing a set voltage (current limited by the 1K3 resistor R19)...and disappears somewhere else down the via I marked V out ; if the errant voltage 'jumped' the diode in the millisecond before it exploded, whatever that V out via feeds may have seen a spike... ....I'll just imagine that Q5 was switched off at the time, thus no damage should've been done....but whatever that zener feeds has to be checked... HTH
    • I think Fitmit had some, have a look on there (theyre Australian as well)
    • Hah, fair enough! But if you learn with this one you can drive any other OEM manual. No modern luxury features like auto rev-matching or hillstart assist to give you a false sense of confidence. And a heavy car with not that much torque so it stalls easily. 
    • Actually, I'd say all three are the automatic option. Just the different trim levels. The manual would be RSFS, no? 
×
×
  • Create New...