Jump to content
SAU Community

16th-17th April : Autobarn Drift Battle @ Mallala


Recommended Posts

This is on as a support event to the Australian Motor Racing Series

More Info.

http://www.driftaustralia.com.au/index.asp

http://www.mallala.com/

Entry is $25 (U14's Free).

I can't find a fixture, or a full listing of the competetions, but i belive it's Formula 3's, Commodore Cup, Proton Cup, soem more and of course the Drift!

The Dirft finals is on the 17th I know that much, anyone interested or already contemplating going to this?

- Ash.

More info. here: http://www.amrs.net.au/

Looks like the events are:

1. Kumho Tyres Formula 3 Championship

2. Shannon's Australian Production Car Championship

3. Gulf Western Touring Car Challenge Series

4. Rotors & Drums Australia Saloon Car Series

5. Australian Super Kart Championship

No mention of the Drift on that site so not sure if it's out of date or what.

http://www.driftaustralia.com.au/news.asp?newsitem=7

Practice and qualifying for the event will be held on the afternoon of Saturday the 16th, and the Top 16 battles will be run on Sunday the 17th.

i am interest but i am pretty poor recently :rofl:

http://www.driftaustralia.com.au/news.asp?newsitem=7

Practice and qualifying for the event will be held on the afternoon of Saturday the 16th, and the Top 16 battles will be run on Sunday the 17th.

i am interest but i am pretty poor recently :P

Cant afford the $25 and petrol?

Anyone else? I'll be heading up in the afternoon coz I'm trying to organise looking at some rims to possibly buy in the morning, if i can't sort it out during the week.

Well I'm going up with a couple of guys from work and anyone is welcome to join us, just send me a PM before COB Friday (as i don't have net access from home), And i'll give you my mobile number and we can tee something up.

Cheers,

- Ash.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..   
    • Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...