Jump to content
SAU Community

Recommended Posts

Thats right , my R33 4 auto 4 door now totes an RB26dett :flamed:

Its been a long 12 months since the demise of the 1st 25 , with only a brief (4000 kms ) stint with a forgied 25 ( this is a long , costly & painfull story that I will leave to my Lawyers!) all of which lead me to , with a little help from that zoom article , putting an Rb26 into the 4 door.

Basicly , I was able to fit the 26 into the 25's hole by using the 25 engine mounts & just turning the drivers side 1 around 180 degrees.Then shorten the throttle cable , add a GTR radiator top hose & ta da!

I have retained to 25s engine loom so I can keep the Wolf ecu that alows me to run the auto , we just had to change the injector plugs to Bosch ones & change the function of the 25s VVT switch to now be the air temp sensor :)

Although , with the help of Wolf tech support , I am able to use the 26 Cam Angle sensor & change the way the map reads to Ref & Sync. (instead of the modified 25 cas , used for dual point sensing) which has made Cold starts much more reliable.

The 26 is out of an R33 GTR with 51 000ks on it , stock internals & injectors , & the only mods are GReddy adjustable cam gears.

The GTR turbs were rebuilt using T28 (SR20) zorst wheels & housings because they are Steel , & much bigger!

The auto remains stock ( bigger trans cooler coming) but using Redline Racing ATF

which has practically removed any "slip" on the now quite abrubt Gear changes :aroused:

The end result..........376.9rwhp with boost spikes to 20psi before settling to 18psi

& I am bloody happy with that!

The real test will be Drag combat on the 23rd of April so...fingers crossed no :Bang:

Thanks heaps To George & Sean from Adrenaline ( experience counts)

Bart for crazyimports.com

& Steve from Maytech

& here's the pics GTS26tt

Link to comment
https://www.sau.com.au/forums/topic/70472-gts26tt-d/
Share on other sites

Well done Rep and good to see you using the local boys down there.

I know that Peter Blight has nothing but good things to say about George and his patience with getting it right.

Ohh and Maytech, who who get a lot more business if he realised most peoples working days are 8 till 5 , not 5 till 2 in the morning . lol :)

Dare I ask who the lawyer involves or is it probably someone I already know? :)

Cheers

ken

Link to comment
https://www.sau.com.au/forums/topic/70472-gts26tt-d/#findComment-1301410
Share on other sites

nice man. Do u mind if i ask wat sort of figures this conversion cost?? I've been thinking about what i'd do if my engine cooked and just wanna know if its a viable option.

Congrats on the figures dude, bet you're stoked!!

I'm trying hard NOT to think about it dude ....

But I think 10k would cover it for a straight engine change ( including the engine that is)

It starts to add up when you go for Modded turbs , Split gate dumps Custom Intakes etc...trust me

Cheers

Link to comment
https://www.sau.com.au/forums/topic/70472-gts26tt-d/#findComment-1301516
Share on other sites

Yeah nice work troy and good to see it all up and running nicely. It was a nice job Sean and george did on the blue rocket.

So the million dollar question what your guess on ET and MPH for DC.

Plus it will be good to have a couple of the buno boys at DC.

Link to comment
https://www.sau.com.au/forums/topic/70472-gts26tt-d/#findComment-1302621
Share on other sites

Thanx Pete ,

As for ET & MPH , I'd settle for 12.5 @ 115..... as long as its better than my last run :) (except this is in street trim = No Nos)

I'm not sure quite how bad I want to beat up on it , but lets face it , by the end of the day I'll probably be Stalling it up against the handbrake!!!

Link to comment
https://www.sau.com.au/forums/topic/70472-gts26tt-d/#findComment-1302651
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Haha, i kow right? Could have bought so many cars for the same amount of money (or less) but driving Unicorn gives you at least +1mln to style 😅. Like wise man said "life's to short to drink cheap wine and drive boring cars" 😉
    • Newbie here, proud owner of an Autech 260RS. I'm on the hunt for wiring diagrams specific to the 260RS, particularly S1. I've ran my eyes through R33, R34 Diagrams, there are some similarities, however continue to find incorrect wire colours and pins on connectors in the 33,34 diagrams.   I was hoping someone could point me in the right direction? I'd be happy to pay for the originals in Japanese. I can translate them, at least they would be accurate.   Any help please would be greatly appreciated, never heard an RB26DETT before let alone driven one, and I've got a spaghetti monster of goodness to sort out.   Cheers Benny  
    • Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
×
×
  • Create New...