Jump to content
SAU Community

Recommended Posts

If its older than 15 years you have no problem .

If not and its already in australia you will not get it complied . If still in japan there is a place in sydney that have plates for 32's now .As you are in melbourne i couldnt tell you .

Evian can you please be specific what you're after?

A compliance plate is usually riveted to the engine bay of the car and not something you need a 'holder' for. Any car coming into Australia needs one of sorts - under SEVS you get a plate, whilst under the 15 year rule a plate with the local VIN is affixed to the car.

As wrxhoon said, there is one place in Sydney that now does R32 GTST SEVS compliance work. You'd need to contact them for a price.

Right! Anyone can private message me the details for the Sydney Compliance plate R32 ...

I'm still looking in importing one. So I don't have the car with me. Also I thought the 15 Year thing is over isn't it ? You can no longer bring 15 year old cars in without compliance..? Well please correct me if I got that wrong.

You can still bring 15y.o. cars in but it can finish anytime now .

If you want to bring a 32 give me a p.m. and can put you in touch with someone in japan to buy the car for you so you dont have to pay an extra $1000 to saomeone in australia as well .

Actually Evian if you read the thread it shows the full story. The Govt has proposed a change to the 15 year rule, but it has not been officially 'gazetted' yet (published). Until it is, the current rule continues to apply and you are still able to import cars under the 15 year rule.

Ring up an importing company and ask them, im sure they all have their hands on the most up to date info. Try www.prestigemotorsport.com.au

AFAIK, the 15 year old rule is still going, and as long as you can show proof of purchase before the rule change, you can still import your car.

  • 2 weeks later...

Hey guys, still on topic, I am considering buying a late 89' model R32 GTS-T, its already here in the country. Can I still get 15 y.o compliance on the car? I know this costs ~$1200, is there anyone who knows a good place in Brisbane to do the job? Thanks very much for any help you can offer.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
    • Yes sir am asking is there possible way from aem tuner from wiring pins 
    • Have you checked cam to crank timing and confirmed balancer marks are correct?
×
×
  • Create New...