GT30R and RB20/25 HKS manifold (new!) & 550cc Injectors! 3rd gear tyre fryin' anyone?

[amosite]

Brand new garrett GT Series BB turbo rated at 500hp. This is also

known as the GT30R 56T model

Front A/R is 0.6 (clears headers and Engine mount!)

Rear A/R is 0.82

4'' inlet with massive bell mouth to suck in plenty of laminar air

with surge shroud (similar to HKS 3037S)

2" outlet to suit intercooler pipe work

Turbine housing: GT30 non wastegated.

Inlet: T3

Outlet :GT30

Ball bearings allow the turbo spin forever, even when spun by hand and increadible reliability on high boost. I have seen these making 300 Rw kw on 17 PSI!

Item includes Garrett warranty from date of purchase.

Unlike bushed (STD wet floating bearing) turbos that need replacing/rebuilding

at 40,000 klm in performance applications, this will only require new oil seals

at 80,000 klm. This means long term savings!

Utilizing the latest compressor and turbine wheel design these have proved to

spool up even faster providing more drivability, stronger midrange power and torque with better reliability.

Inconel turbine shaft which is extremely light allowing quicker turbo response

and heat resilient this turbo is top shelf with no expense spared.

Recommended retail is $2960

Turbo only $1799

____________________________________________________________

HKS Cast manifold.

This will not crack! In addition it can be further ported, extrude honed etc for further improvement if need be. As you can see from the pic's, the design is pretty good. All runners are split as far up to the collector as possible which will give good top end and mid range performance. It even splits the wastegate gasses.

This has a T3 flange, but is big enough to be drilled for a T4 flange if required.

I usually use these with GT30/35/40 BB turbo's due to the T3 flange. Due to the low mount design, you minimize any unwanted attention from the cops! If you need more info feel free to Pm me.

ON HOLD

____________________________________________________________

Brand new HKS Style wastegate to suit.

45mm Valve, silicon/nomex doaphram and 12 psi spring

$250

There is no warranty on this wastegate as I got it cheap and am selling it for what cost. It is NOT an original HKS wastegate (otherwise it would be $1300)

____________________________________________________________

Manifold and Turbo combination $POA

RB25DET Nismo 550 cc injectors $750 cleaned and shipped

RB20DET/RB26 HKS 550cc injectors $750 cleaned and shipped

[geordie]

how much as a kit, gate, manifold, turbo?

[amosite]

Turbo and manifold $2700 + Wastegate add $250

[R33RWKW]

Manifold still for sale? You have Pm.

[R33RWKW]

RB25DET Nismo 550 cc Injectors still for sale? You have PM

[R33RWKW]

amosite - You have a PM regarding the manifold postage cost.

Cheers, Chris

[willyr33]

Need a reply from my pm thanks

[R33RWKW]

PM sent

[R33RWKW]

PM sent (injectors & wastegate)

[Greedy_GTS]

Is turbo & manifold still for sale?