Jump to content
SAU Community

Recommended Posts

Updated price: $7,500

Updated with pictures

Has 102,000km on the clock

Is a stock standard RB25DET and gearbox and clutch and driveline

Interior drivers garnish and air con vents are damaged, have a new one here

Diff provides no drive, I assume the drivers side halfshaft has been pulled out of the diff.

Needs a rear quarter cut, drivers side suspension subframe and drivers door. A-pillar is unharmed. B-pillar needs a little straightening where the drivers side intrusion bar bent it backwards about a centimetre.

Bootlid is fine but now needs a little touchup paint on the edge because the rear quarter is touching the bootlid and the hinge of the bootlid is pushed about 1cm in, therefore the boot doesn't shut properly.

From a couple of us checking the car out, we *dont think* the subframe is bent but still could be by an unnoticeably small amount.

Needs a new wheel and rear caliper assembly, they were broken as part of the accident.

The engine and gearbox stock standard and are perfect, the owner was a big wuss when it came to thrashing cars.

Car has no rego, registration has been cancelled. There are no debts on it either. It is fully complied under low volume system, been in Australia for a few years with the one owner.

Click each picture for a large version

01.JPG

02.JPG

03.JPG

04.JPG

05.JPG

06.JPG

07.JPG

08.JPG

09.JPG

10.JPG

11.JPG

12.JPG

13.JPG

14.JPG

15.JPG

Sorry, only going from memory. Will get more details in the next few days

Approx 100,000km

5 speed manual (as per thread title)

I think its a 1993 model

No mods

Fully owned and complied (green plates), no rego.

Interior in very good condition

Comes with some spare parts

Bootlid is OK, rear bumper and RHS taillight needs replacing

Front bumper needs a respray

Otherwise the car is in very good condition

  • 1 month later...

Nar not drift damage. Sitting on Middleborough Rd waiting to turn right and an unlicenced driver with no fixed address driving someone elses unregistered car slammed into the skyline :P

Hey mate,

Have you looked to see what a 1993 GTS-T goes for? And in repairs and damage there is easy $4000-5000 so why would someone go through all that to save $3000 and know they bought a damaged car. I will offer you $2000 cash as long as you are willing to provide all vehicle details for a Revs Check

G

Hey mate, you are VERY funny.

This car may also be used for wrecking. Have you priced up a halfcut lately? How much do you think an rb25det engine alone goes for?

$2000 hahahaha.

Do you really have nothing better to do than post rubbish in other peoples threads? If you're not going to buy it then get lost, I nor anybody else is interested in hearing your drivel.

  • 2 years later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Initially I thought having a pair of Recaro seats would be a big bonus, it turns out these do get a little uncomfortable on long journeys (my fault, not the seat). I had a look through the GSM Performance website at reclining seats and booked an appointment to visit their show room. I got the Recaro Sportster CS for the R34 from here, was very happy with the service received so of course a re-visit was in order. Unfortunately the two Corbeau seats I had chosen aren't on display but they had 4 other options available. Two seats dug into my back, one dug into my legs and the other was perfect. I also found out that Recaro seats use a larger bolt pattern so some adaption was required. Luckily GSM offer some universal adaptors that should solve this problem. I searched the interwebs for price comparisons and Corbeau themselves were the cheapest at £300 cheaper (for the pair). I asked GSM if they could price match, unfortunately they couldn't. I later received an email saying Corbeau would honour them the same discount, but the purchase was already made. I did however order the brackets from GSM, both arrived on the same day. I started with the passenger side seat, knowing this was going to be a little trial and error. There are 3 mounting holes at the front and 2 at the rear on these JURAN Racing seat rails.  With the adaptor brackets mounted, the allen cap bolts started to push into the seat, NOT GOOD!  The rear mounting holes lined up but there were issues at the front. The holes were 1/2 hole out, so the brackets got a tickle with the drill to modify the holes. The supplied bolts weren't going to be long enough and a spacer was needed to stop the adaptor bars from bending. A local fasteners company supplied be with some nylon spacers and longer bolts (M8x30, although these will be replaced with 35mm long shortly) A before and after I pre-drilled the front bracket before making a start on the driver's seat to save some time. And in no time at all that was in the car too. The all black seats have transformed the interior and these are MUCH more comfortable. The only downside with the new Corbeau seats is I sit a little higher, but I'll happily accept that over discomfort. The Youtube video can be found here: https://www.youtube.com/watch?v=wPyttKPktXA
    • All 3 I guess. The car came with the JASI Aero 4 door Type R Full Kit unpainted so this was one thing at the top of my list to complete then I noticed there were body panels parts for this kit so i picked them up along with some black mesh to fill in the front bumper and front side air vents. car is at a paint and body shop atm completing this work. Next I will be addressing the internal bells and whistles, great summer project I can do with the kids.  full interior removal - ,boys car sound deadening - pads and spray ,boys stereo, sound, lighting - Big 3, GTT or bigger alternator ,kids head lining - dye black add star lighting mod ,daughter. That's it for the next 5-6 months. I have some motor maintenance  work i have to plan out. oil filter relocation, gaskets, mounts. beyond that, mind is starting to turn over if i can use a DET intake plenum, block off turbo ports & pipe in a air intake.      
    • roller coaster of a ride. Alarm system was removed & main harness was repaired where possible. still no fix just random successful starts. moved on to the replacing the ignition switch and relay. well all this troubleshooting & repair has been going on, the car is at a paint and body shop being pushed around. Ive been going down there on odd days after work to get it sorted.     
    • 5th November if you want to come out for a spin wakfield
×
×
  • Create New...