Jump to content
SAU Community

Recommended Posts

Updated price: $7,500

Updated with pictures

Has 102,000km on the clock

Is a stock standard RB25DET and gearbox and clutch and driveline

Interior drivers garnish and air con vents are damaged, have a new one here

Diff provides no drive, I assume the drivers side halfshaft has been pulled out of the diff.

Needs a rear quarter cut, drivers side suspension subframe and drivers door. A-pillar is unharmed. B-pillar needs a little straightening where the drivers side intrusion bar bent it backwards about a centimetre.

Bootlid is fine but now needs a little touchup paint on the edge because the rear quarter is touching the bootlid and the hinge of the bootlid is pushed about 1cm in, therefore the boot doesn't shut properly.

From a couple of us checking the car out, we *dont think* the subframe is bent but still could be by an unnoticeably small amount.

Needs a new wheel and rear caliper assembly, they were broken as part of the accident.

The engine and gearbox stock standard and are perfect, the owner was a big wuss when it came to thrashing cars.

Car has no rego, registration has been cancelled. There are no debts on it either. It is fully complied under low volume system, been in Australia for a few years with the one owner.

Click each picture for a large version

01.JPG

02.JPG

03.JPG

04.JPG

05.JPG

06.JPG

07.JPG

08.JPG

09.JPG

10.JPG

11.JPG

12.JPG

13.JPG

14.JPG

15.JPG

Sorry, only going from memory. Will get more details in the next few days

Approx 100,000km

5 speed manual (as per thread title)

I think its a 1993 model

No mods

Fully owned and complied (green plates), no rego.

Interior in very good condition

Comes with some spare parts

Bootlid is OK, rear bumper and RHS taillight needs replacing

Front bumper needs a respray

Otherwise the car is in very good condition

  • 1 month later...

Nar not drift damage. Sitting on Middleborough Rd waiting to turn right and an unlicenced driver with no fixed address driving someone elses unregistered car slammed into the skyline :P

Hey mate,

Have you looked to see what a 1993 GTS-T goes for? And in repairs and damage there is easy $4000-5000 so why would someone go through all that to save $3000 and know they bought a damaged car. I will offer you $2000 cash as long as you are willing to provide all vehicle details for a Revs Check

G

Hey mate, you are VERY funny.

This car may also be used for wrecking. Have you priced up a halfcut lately? How much do you think an rb25det engine alone goes for?

$2000 hahahaha.

Do you really have nothing better to do than post rubbish in other peoples threads? If you're not going to buy it then get lost, I nor anybody else is interested in hearing your drivel.

  • 2 years later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
×
×
  • Create New...