Jump to content
SAU Community

Recommended Posts

***NEW*** Japanese quality engineered cooler kits for most models. ***NEW***

S13, PS13, RPS13, S14, S15.

HCR32, ECR33, ER34.

HKS Type-S

301x600x65mm

$1450 with free delivery

gYQ63317.jpg

R33 GTS-T RB25 model shown

TRUST V-SPL

276x600x76mm

$1450 with free delivery

kVq63469.jpg

S13 model shown

TRUST R-SPL

294x600x115mm

$2350 with free delivery

BLITZ LM

$1450 with free delivery

Are these actually Real not take offs i need one for my rb25 wich will need to be able to support 250-300rwkw! got any in mind?

cheers

These are the genuine item shipped directly from Japan.

I do have a cooler in mind for you. You're looking for a cooler which accomodates up around 450-500ps.

Stay tuned.

Are these actually Real not take offs i need one for my rb25 wich will need to be able to support 250-300rwkw! got any in mind?

cheers

The kits listed above are the only kits we bring into the country at this stage. Any specific orders may take time to locate at a desirable price for the consumer.

Charles.

Sometimes on the R33 the piping goes left then up , or then there is the 180degree bend going back towards the stock intercooler position. Which way is it? Hybrid style or 180degree bend style.

correction..

only Apexi that i know of has this bend.

perhaps somebody else here may be able to assist.

all of the kits i can bring in do NOT have the 180 degree bend on one side for the RB25DET.

not these particular sets.

also, HPI do a FMIC kits for all nissan makes. once again, straight out the side of the tank rather than the 180 degree bend on the end of the tank.

can get these in also for about $1600 landed.



  • Similar Content

  • Latest Posts

    • Hi GTSBoy, Excuse my ignorance but what does a "Bad" Knee point mean ? 
    • HFM BM57 has a "bad" knee point, IIRC. It's not the same thing as the later R chassis MC.
    • The ATTESSA is functionally identical to R34; there were a bunch of JDM models that continued ATTESSA including Fuga/Q70, Skyline/Q50, Cima etc as an option. All with Auto only and I think mostly for snow regions. AFAIK there were no AWD VR30DDTT sold in Australia - it is on my to do list to check regs for racing a LHD car in Targa/ATR/AASA/CAMS events because if I can get the auto to work it would be interesting to run a 4wd car The Ecuteck TCM tuning is the same model as their ECU tuning, they already have it for R35 and Dose's favourite, BMW. You buy "points" to allow your computer to be tuned, buy either a bluetooth (phone app) or bluetooth+USB+Key (phone and PC) dongle, and pay for a tune that will be locked to your tuner ( ). You can also access the tuning software yourself but 1. it is mega expensive and 2. these computers have a billion parameters that intersect, so how could you ever spend enough time on it to get a decent result.
    • Or, is it a case of what it is like owning an R series Skyline? NFI what the previous owner has done or fiddled with... Ha ha ha After reading through this thread, I went on a bit of a research about the Q50/Q60. Now I'm quite intrigued by them! Is the AWD in them more like a WRX where it's always AWD, or is it more like the ATTESSA in the GTRs? By the sound of this TCU tuning, this sounds like a case of someone has made some real software for it, and you just need the right piece of hardware, and then you license that specific vehicle/TCU. Or is this a case of the software will be really expensive so only a few tuners have it, and you still have to pay a license per vehicle?
    • By popular demand.. it was a coil. Got my hands on 1 new OEM coil, replaced with the one that made the less noise difference when I unplugged it while the car was running and started the car up. No stutter and the engine light was gone. I guess I’ll buy the other 5 they have lol
×
×
  • Create New...