Jump to content
SAU Community

Recommended Posts

HI all

Has anyone done repaires to their Cefiro Steering rack?

My right hand side rack is leaking and needs resealing but I was wondering , instead of me riping out the rack, sending the seals south, with a week turn around, if any one knows where to get the seal just sent to me.??

Cheers guys

ADRNLN

Link to comment
https://www.sau.com.au/forums/topic/77706-power-steering-seals/
Share on other sites

Surely there is a power streering workshop in Darwin somewhere.

Whilst a cefiro rack may not be something they see everyday they will be able to decifer the seals required and order them in.

I suggest you speak to your local workshop, i am certain they will be able to help you.

if your worried about getting the wrong seals just speak to you nissan dealer they will tell you the part numbers and put them in the computer to tell you which ones a are s13 and r32 thats easy but doin the reco your self might not ..

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I can see between the water jacket and cyl 3 there wasn't a hard line of combustion gas. It certainly appears that the issue is coming from there. Yes, checked the tension. All at 100ft lbs where I set them 5 years ago. These blocks can crack but generally when they have been over bored. Mine is only 0.5mm oversize at 89.5mm. They break between cylinders around the 91mm mark. No sign of that with mine. My gut feeling is the head gasket lifted a while back when the studs stretched and i bandaided it by retorquing the studs. It's finally let go.
    • My Nismo 1.5 churps a bit on reverse turns when cold, but besides that feels like a stock diff.
    • Yes, but, I paid cash and I'm pretty sure the receipt was in the bin 10 minutes after I got home Note to self, keep all receipts
    • Bunnings would have just handed you your money back on that one!
    • So, version 4 intake is on its way I was looking at these a while ago but at around $200 or more it was a little pricey for something that might not work, but, I had it in my watch list, but, I got a message saying it was on special, and I had a code thingie to use, it eventually came in at $120 delivered, so BAM, BUY NOW.....LOL I'll need to have a look when it arrives but I feel it will "look" better than what I currently have, as it comes with a PCV fitting, so I will be able to get rid of the alloy pipe that goes to the throttle body with the PCV fitting  Well, that's what the voices in my head are telling me  Oh, and this happened today Yeap, it was a Trojan, and it was cheap, so I headed back to the hardware store and actually spent a little bit more on a heavy duty,  one that was actually recommended by a plumber mate, a Cyclone one with a fibreglass handle that is actually rated for clay The broken shovel will eventually be "modified" into a short handle shovel
×
×
  • Create New...