Jump to content
SAU Community

Recommended Posts

guys as I am sure most of you are aware I got an FMIC and have been fitting it over the past couple of days. Everything’s all good with it however the new piping doesn’t come with that little nipple thing (this is the n00b part).

On the stock IC piping I have a bit of rubber piping running to my bleed valve to determine how much air to bleed out etc however the new piping doesn’t have the little nipple thing to attach it too. Can I just take this piping to any metal/exhaust place and get them to make it up also as an alternative I am sure that me and dad could weld one onto it but were do I actually get the nippily thing.

PS: I am aware I have said nipple alot don’t get to aroused people. :boobs:

Link to comment
https://www.sau.com.au/forums/topic/77731-n00b-question-re-ic-piping/
Share on other sites

guys as I am sure most of you are aware I got an FMIC and have been fitting it over the past couple of days. Everything’s all good with it however the new piping doesn’t come with that little nipple thing (this is the n00b part).  

On the stock IC piping I have a bit of rubber piping running to my bleed valve to determine how much air to bleed out etc however the new piping doesn’t have the little nipple thing to attach it too. Can I just take this piping to any metal/exhaust place and get them to make it up also as an alternative I am sure that me and dad could weld one onto it but were do I actually get the nippily thing.  

PS: I am aware I have said nipple alot don’t get to aroused people.  :boobs:

Leech i had the same issue a week or 2 ago. Just buy a brass nipple from autopro and either bolt it or weld it into the IC return pipe.

have a look at mine as i am sure it doesnt have one either but i have a bleed valve.  Come to trivia

ahhhh what time you going to be out their as you must have somewhere a line that runs to your bleed valve from the ic piping otherwise how does it know how much PSI is going through. i have shit to do tonight but i might be able to pop out for like 30 minutes to have a squiz

Yeah you definately need it, it runs (via your bleed valve) to the boost control solenoid/wastegate actuator...mine does anyway.

yea thats exactly what i thought without that wont it just majorly overboost ??? as it will have no idea how much boost it will be running.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yea - I mean I've seen my fuel pump which is decades old and uh, while I'm not saying this with real knowledge... but I sure get the ick at using anything in the fuel system that produced the state of that pump. Many years ago I went through multiple pumps (and strainers) before I dropped the tank to clean it out with extreme violence. I'm talking the car would do maybe 50km before coming to a halt, which resulted in me cleaning out the filter with some brake cleaner and going on my way. None of my stuff ever looked like what came out of your fuel tank. I don't think I'd be happy with it unless every single component was replaced (or at least checked/cleaned/confirmed to be clean here).
    • I'm not going to recommend an EBC pad. I don't like them. Just about anything else would suit me better. I've been using Intima pads for a while now.
    • Agreed, and in particular the earth strap that should go from the subframe to the chassis but it often broken or left off. There is a section in the R32 workshop manual you can follow for troubleshooting if you don't see anything suspicious, and depending where you are (there is no location on your user profile) you should be able to get your hands on a second hand replacement unit still if needed
    • Yeah they mention as a R34 for 2.5 Turbo...but then again thos "small" were also for R34 by that different site. But i look into it and that 310mm EBC is for R34 GTT. And by those you linked the specs are the same 🙂    EDIT: I found these on one site here: DBA 4000 series T3 DBA42304S They are 310mm...and it says are for R34GTT...are there good? EDIT2: ok they have pads too.  What "color" should i get for street use? I dont want/need some noisy ones...(and if they are not that dusty that is good too)
    • Yeah, shame. Maybe  driver's carpet is available 🙏. I am waiting for both amayama and nangun to confirm.
×
×
  • Create New...