Jump to content
SAU Community

Recommended Posts

Hello everyone...

I have a little bit of an issue here; to do with the R34 GTT and its performance (general running, and not power). It's an Tiptronic Auto.

My main issue is the fuel economy and the next issue is the power...

Now, many of you have suggested getting an aftermarket management system such as the SAFC II or the PFC (seems to be top choice). However...

My mechanic said it would make close to no difference in terms of better consumption or performance - is this true? or is it bullshit?

Secondly, since I have the Tiptronic Auto, which management system would work? Again I've been told several stories here: some say you need a piggy back system, others say stand-alone works just as well. What does work, and which one is ultimately better?

Your godly advice is very very much appreciated.

NOTE: In the not so distant future, the o2 sensor, oil filter will be changed as well as adding injector cleaner - in a bid to jack up fuel economy numbers.

Link to comment
https://www.sau.com.au/forums/topic/82132-to-tweak-or-not-to-tweak/
Share on other sites

My mechanic said it would make close to no difference in terms of better consumption or performance - is this true? or is it bullshit?

well... technically its wrong but what he is saying is what happens in the real world

let me explain...

skylines run rich... right? so with an aftermarket mnagement system you will lean it out and make more power at lowe rpm so theoretically you will save on fuel

BUT... what do you do when you have more power? you use it! so as a result of having the aftermarketmanagement system you give it that little bit more which makes the theoretical fuel economy saving mean nothing.

Warren.

The only way the aftermarket management (not safc) could improve fuel economy is to slightly lean it out furthur than 15:1 on light load and cruise. Also extend how long it stays in closed loop mode. Play with ignition timing at light load and cruise.

Together it all makes a little difference but not much. If your not getting over 400km's per tank easily then something is wrong.

Pull the injectors out get them cleaned, check for airleaks, check compression etc and replace the 02 sensor.

Do the cheapest or what appears to be the problem first.

i.e if its idling a little rough clean the injectors. :cheers:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Actually, I'd say all three are the automatic option. Just the different trim levels. The manual would be RSFS, no? 
    • What Duncan said sounds right. Also, it looks like they only have the driver's mat. Not the rest. Because looking at the diagram: KG4911 is just the mat for the driver. KG4900 is the full set if I'm not mistaken and discontinued.   But, it looks like they may still have the full set for the manual S2. Might be worth checking for the other models as well as they seem slightly different. https://www.amayama.com/en/genuine-catalogs/epc/nissan-japan/stagea/wgnc34/6649-rb25det/misc/G49 Man, I'm tempted.
    • I dunno about that as a blanket statement. Pitwork is Nissan's "Nissan genuine" thing, and for stuff like timing belts, I have found them to be excellent. Of course, for things like oil filters, you always use proper trusted brands anyway, not whatever the OEM has taken to using.
    • Ahhhh... If you were putting 12V to the led in there, that's likely made it very unhappy. Chances are how you put power, was 12V across an LED that's meant to only have about 20mA through it at peak, and a forward voltage of about 1.8 to 2.4 volts. That circuit is likely only a 3V3 circuit, and will have a resistor in series with the led too. That's my guesstimate on that light, without having touched one.
    • Another vote for installing them and see how you go.  I mean, you already own them, why would you not fit them? 
×
×
  • Create New...