Jump to content
SAU Community

FS: R32 Sedan, Tein Suspension, 2-Way diff

kudos.motorsports
 Share

Recommended Posts

kudos.motorsports Grand Master

kudos.motorsports

Posted
Posted

P7290222.jpgP7290224.jpgP7290225.jpg

With only 64,000kms on the clock, which judging by the amounts of physical wear, or more to the point lack of, on interior components this freshly complied vehicle still retains the new car smell, despite its age. It is an absolute pleasure to drive, the engine is responsive and the suspension/diff combination make to a very nibble and predictable vehicle.

Following is the list of modifications: Tein height and damper adjustable suspension, Unknown brand 2-way mechanical diff, 3" mandrel bent (dump pipe back) exhaust, an aggressive aftermarket clutch and suspected flywheel package, 17” R34 GT-t mags (on vehicle), Cusco oil catch can.

Also comes with a set of mismatched rims, front are 17” and rear 16”

In a nutshell this is an extremely honest vehicle. What you see is exactly what you get. It has the potential as a reliable daily driver or a perfect base to build a formidable track, drift or street car. For more information and pictures please head over to http://www.kudosmotorsports.com/r32.htm

The fantastic looking vehicle is up for sale. It's freshly complied and awaiting its first registered Australian owner.

Asking Price: $13,000 which includes QLD RWC

Contact Details:

E-mail: [email protected]

Phone: 0401417772

For all details & pictures please head over here.

kudos.motorsports Grand Master

kudos.motorsports

Posted
  • Author
Posted

Hi Jaime,

The car was purchased from a supplier therefore there was no auction sheet. As you can see from the photos the car, in general, is in good condition. The interior is the best I have seen. The only major flaw is the front guards which are a little rough. The majority of this damage comes from some dodgy Japanese guard rolling, or should I say prying. The passenger isn’t anything to really worry about but the driver looks to have received a small knock and would be better of being replaced. If the vehicle sales for the asking price we will be able to working something out.

Unfortunately I am not looking for a trade in vehicle.

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      M35 Aftermarket Fuel Pump

      By GTSBoy · Posted

      If it dies, then bypass. The task isn't difficult. I have one running on a standard R32 FPCM. That's after nearly 20 years of it running an 040, which pull substantially more current than the Walbro. They're not the same module, but I'd hope it indicates that the R33 one should be man enough for the job. I think people kill them when putting proper sized pumps on them, not these little toy pumps we're talking about here.
    • GTSBoy
      Rapid-fire squeaking/creaking from rear suspension

      By GTSBoy · Posted

      Silicone spray won't hurt anything. And if it does, that's an opportunity to put some solid steel spherical bushings in, so you can really learn what suspension noise sounds like, If you're going to try it, just spray one bush at a time, so you can work out which one is actually noisy. My best guess is that if the noise started only since putting the coilovers in, then it is just noise being transmitted up through the top mounts of the struts, and not necessarily "new" noise from bushes. But it's almost impossible to know.
    • GTSBoy
      Jacks that fit under GTR lips that can reach the subframe?

      By GTSBoy · Posted

      Are you saying the 34 is SUV height, and not that we're talking about an SUV here? (because if we're talking about an SUV, you don't fix them. You just replace them when something breaks. Not worth establishing sufficient emotional connection with an SUV to warrant doing any work on one). I wouldn't jack my car up on a short little loop of 10mm steel rod poking out through a hole in the bumper bar, front or rear end. I realise that we're probably not talking about that type of loop at the front, being the one under/behind the bar on a Skyline.... but even for that one, trying to jack up on what amounts to a thin piece of steel, designed purely for withstanding a horizontal tension force, not a vertical compressive force (and so would be prone to buckling/crushing) and, my most particular bitch about it - located RIGHT AT THE EXTREME FRONT OF THE CAR, applying a load up through the radiator support panel, etc, with almost the entire mass of the car cantilevered between there and the rear wheels? Nope. Not doing that. Not on the regular. That structure out there in front of the front crossmember is not designed to carry load in the vertical direction. Not really designed to carry any load at all, really. The chassis rail that the tow point is connected to would be fine loaded in tension, as per towing. Not intended to carry the mass of the whole car, especially loaded all on one rail, with twisting and all sorts of shitty load distribution going on. No, I will happily drive up on some pieces of wood, thanks. That can only happen on driven wheels, and they are at the other end of the car, and this problem does not exist at that end of the car. And even then, I have been known to drive up on at least 1x piece of 2x8 each side at the rear, simply to reduce the amount of jack pumping necessary to get the car up high enough for the jack stands. What really really shits me about Skylines is the lack of decent places for chassis stands at either end of the car. You'd think they'd be designed into the crossmembers.
    • f00stx
      Rapid-fire squeaking/creaking from rear suspension

      By f00stx · Posted

      I've got MCA Blues on my V36 Skyline, and while I've managed to sort out issues with scrubbing/bottoming out by raising it a smidge and increasing the damping hardness, the rear end still sounds *super* noisy when driving on anything other than the flattest surface imaginable. It sounds like a small party of flamingos are just chatting away in the back, which makes me think there are several link points in the suspension contributing to the noise. Am I hearing dried out/worn bushings? None of it sounds like metal-on-metal, it sounds more like hard rubber squeaking on metal. It's been suggested that a bit of silicon spray on each bushing might quiet them down, but I'm not sure what material the current bushings are made of (probably factory, I imagine) and whether silicon spray will degrade that material.
    • Kinkstaah
      NC MX5

      By Kinkstaah · Posted

      The obvious answer here is get a ND2/3 RF with the Targa top. The red is nicer, too!
×
×
  • Create New...