Jump to content
SAU Community

Recommended Posts

Would like to congratulate all who attended today and to the SAU NSW organisers for putting on a great day. Was nice to put some faces to the names of a few people.

There were quite a few PB's run today, the most notable being Paul's 10.3@133 in TWO.06L and Stacey's PB of 11.9.

2RISMO also ran a PB of 11.6 and Brad ran a PB of 11.2 in the 200SX. Congratulations. ;)

Post up your times and pics :P I have some pics and videos that I will upload tomorrow.

:P

Charlie.

  • Replies 275
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

I had an awesome day today. Got 20 runs in and was consistantly running between 13.1 - 13.3 by the end of the day. I ended up doing a PB of 13.160 @ 103.62mph using the std turbo (12psi) which I was pretty stoked about. It was a big improvement on the 13.7 I'd done previously.

Big thumbs up to all those responsible for making today happen, there were definately some awesome times ran today. The day ran very smoothly and everyone behaved, so hopefully we'll be able to have another one of these days in the future. It was also nice to meet a few new people today, although I probably missed out on meeting a few more due to the fact I'm just a quiet lad. All good though :P

Look forward to seeing some pics ;)

THANKS ADAM!!!!!

What an awesome day!!!!!! BIG :P to the organisers!!! I can't wait for the next one!!! get to it bob! ;)

Congrats to stace and paul on their awesome 10.3!!!! :P and to stace and 2rismo for their pbs :)

my pb was 12.646@110mph.... can't believe i did that well!!!! i was chasing that 12.5 after that, but it was elusive! :( next time! :)

Great Day!

so sun burnt :P

Ah well congrats to everyone who got to or beat thir PB's

and Paul with your 10.5 and stace with you're 11.* !! (still love your car ! haha)

thanks for all the organisers for putting everything together and for the food ;)

:P that was me putting on a show for andrew (merli) :(  i saw the guy.. i signalled an apology!  hope they weren't too upset!

What's funny, was that you did that MASSIVE burnout (the 2nd one) and sat there for about 1 full minute smoking them up, and then lined up and completely stuffed up the launch and pottered down away at like 10% throttle ;):P:)

The officials had a good laugh at that one :chairshot

Moved this thread to NSW General section... More people will read it here :P

I'll move it back to the Drift & Drag section after it has run it's course!!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Legend. I ended up finding the facebook account of the owner of the first car i sent but sadly he deactivated the account. I think you’re right in saying it’s some sort of well done custom job. Really appreciate your help anyways.
    • Totally equivalent. Stock often goes from the comp cover because that's where the actuator is also installed and the factory needs 2" of hose to make the connection - and it comes as a pre-assembled unit. They totally have a boost reference from somewhere between the turbo and the throttle(s). Oh, jeez. Just do it in M12 then. We don't actually care that much. I would expect any such AN converter fitting to rely on an o-ring or some other seal onto a flat surface under the flange of the hex**, because bolt threads are no intended to provide a pressure seal. unlike..... pipe threads. **which also requires a suitably flat and smooth surface on the turbo's boss to provide the seal.
    • I also used NP   That’s were it’s seems to be the best place to fit it? All schematic shows also that it’s should be referenced from the turbo housing. But idk, I do see high hp cars without any connection or anything to their turbos, so I really don’t know how they connect their things
    • I do have loctite 243 and 246 and a few more models. I could drill it now in place and make new threads for m12 and order an4 - m12 coupling and fit that to the turbo. Run a braided hose to the EBC which I could get a an4 to 1/8npt 
    • So M12 and sealant should be fine?    NPT ” because that’s what I had and what I could get atm. 
×
×
  • Create New...