Jump to content
SAU Community

Recommended Posts

(cross-posted on OCAU forums)

From a usual city cycle economy run of 14L/100km (very sedate driving, ie hardly ever) to 16L/100km (hooning around) I just turned in a result of 13.3L/100km with my usual heavy-footed driving after doing some routine maintenance on my R33 GTS-t. The power has also increased noticably down low, though it's not noticably different when floored. Idling is also smoother and throttle response improved.

Ok, so what did I do to get this fairly hefty improvement in fuel economy? Here's a brief list:

1. Changed spark plugs.

2. Replaced fuel filter.

3. Put some Spitfire injector cleaner in fuel tank.

4. Installed a fuel catalyst in the fuel line (this is the controversial one).

I'm not going to focus on the last point because I'm not convinced they work either - after I go through a few tanks of fuel I'm going to remove it and see if my economy worsens again. Because of my lack of focus on it I won't even mention what brand/type it is.

But the first three things I did certainly helped. I don't know which of the them improved power and economy the most, but if you've just bought a car and don't know for sure when those things were done you should do them asap. I wish I'd done them a lot sooner now.

I was going to pull the injectors out and get them ultrasonically cleaned, but I think I've achieved most of the economy gains already so it's probably not worth the extra $200 or so to pull them out and get them dnoe.

The plugs I used were NGK Iridiums to replace the standard platinums that were in there. The old plugs were in pretty good condition so I still think the Iridiums have something going for them.

I cut open the old fuel filter to see what it was like inside and it was SCUMMY! The filament was all black and clogged up, and there was black SLUDGE in it! I couldn't believe my eyes. Does anyone know how long it takes a fuel filter to get in that condition? They cost about $20, I might just start doing it every 10000km.

Just a hint to anyone wanting to change the fuel filter on their Skyline - make sure you have some spare fuel hose on standby (or at least access to some at short notice) because it was an utter BITCH to get off. In the end I had to cut the hose and replace it. If the old filter has been there for a long time most likely you will damage the metal connectors if you attempt to pull the rubber hose off.

Link to comment
https://www.sau.com.au/forums/topic/8639-improving-fuel-economy/
Share on other sites

Onya Jimah !

I have no idea how long my fuel filter and spark plugs have travelled but i know at minimum 12,000km.

I would say my average fuel economy would be about:

17.2L/100km (350km from 60L) if i drive hard.

15.0L/100km (400km from 60L) for an average week

11.7L/100km (513km from 60L) best ever while still hitting the speed limiter about 4 times. :)

Im quite confident that if i drove the car like a normal human being with light freeway driving i could get around 10.8L/100km whilst driving on stock boost.

If i knew how to change the fuel filter i'd probably do it. (Easy on my old Pulsar i'll have to take a look on the 'Line).

Ok, fuel filter is dead easy, unless you're a stubborn pighead on me and try for about an hour to remove the hoses which refuse to come off :) If I had cut my losses after trying and failing to pull the hoses off after 5 minutes I could have done the whole job in about another 15 minutes.

Here's a rundown on what to do to change the fuel filter.

1. Buy a Z200 filter from GP Auto1 and about a meter of fuel hose (1/4 or 5/8 inch I think? Check what's written on the old one).

2. Leave the engine off for maybe 15 minutes to allow the fuel pressure to drain back into the tank. Some people would say you should bleed the fuel line properly though the a valve somewhere but in my experience I find it fine to just put a lot of rags underneath where the fuel will squirt out of the hose when you pull it off or cut it. When I cut my hose after an hour it just dribbled out, so if you want to play it really safe then wait an hour :)

3. Put some rags underneath the whole area where the fuel filter and line is. I used an old bathroom towel which is nice and big and soaks things up nicely. It didn't need to be that big by a long shot but it's best to go over what you need than under.

4. Take all the clamps off (be sure not to lose the small nut which holds the screw in) and try for A COUPLE OF MINUTES AT MOST to pull the hoses off carefully. If they don't come off within that time you'll probably never get them off in which case you should proceed to step 4a. Otherwise go to step 5.

4a. Cut the fuel hoses as close as possible to the metal line connectors on the car, rather than near the ones on the filter. I just used a sharp pair of small scissors. If you use big sidecutters then be VERY careful as if you misjudge where the metal connector starts you might end up pinching it shut or cutting it off. Err on the side of caution and do it a few cm above where you think it ends.

5. Pull the fuel filter out, then if needed do a vertical cut along the remaining bits of fuel line still in the car so you can pull them out.

6. If you need to replace the fuel lines, measure up the old lengths to the new hose you bought and cut them accordingly. Don't forget to add on the sections that were left in the car to the line length. If your old lines are still in one piece and in good condition, remove them from the old filter.

7. Put the hoses onto the new filter and re-attach them to the car.

8. Put the clamps back on and tighten them up reasonably tight, but not too tightly. They go just behind the bulge in the metal on each connector, on the METAL side obviously.

9. Switch the ignition to the ON position and then OFF again a couple of times to get the fuel up and through the filter.

10. Go back to the engine bay and check for leaks.

11. If all's good, start her up!

Please note that I take no responsibility if you blow your car up during any of this, but if someone can point out a glaring error or omission please tell me and I'll fix it up.

Just changed my Fuel filter. Took me about 15mins and i didnt even spill that much fuel. (Left car sit for 2hrs)

I've got some Wynn's Injector Cleaner which i'll add tonight before my next tank of petrol and then see how we go.

I have some pictures of the dirty Fuel Filter.

old.jpg

after1.jpg

after2.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • sold listed as a Tomei LSD 1.5 Way For 1998+ Nissan Skyline ER34 25GT RB25DE w/Open R200 https://www.ebay.com/itm/174006114594?campid=5338967980&mkevt=1&mkcid=1&toolid=10050&customid=&mkrid=711-53200-19255-0&loc_physical_ms=108689&loc_interest_ms=&campid=5338967980&mkevt=1&mkcid=1&toolid=10050&customid=71883f2ccc571356e0a757bc7adfdde2&mkrid=710-53481-19255-0&loc_physical_ms=108689&loc_interest_ms= it went in like butter all gears, alignment, back lash etc, rotation and clearances correct, and if rolling all rotates smooth and free when coasting down road , clutch in or out over 10 mph smooth... its the binding, clunking and jerking from a stop that is most concerning, also seems like its going to tear the tires off in 10 miles of normal road driving. 
    • What 1.5 way? There's no such thing really as a 1.5 way, just different ways of explaining 2 ways with different ramp rates. HOWEVER. In any driving in a straight line your 1.5 or 2 or 1.7 way should have no clunking at all. With the clutch fully depressed the diff should be silent (unless it's welded but I'm assuming it's not). Something aint right here.
    • Clutch is a spec brand, new clutch system,( PP, flywheel, friction disc, etc. pull type) installed 100 miles ago, with no problems.
    • looking for some help and maybe some insight on others experience with a new LSD. R34 GT ran and drove beautifully, but always alot of grip loss due to the open R200 rear end, so I just installed a new 1.5 LSD way into the stock open R200 for a ER34. Simple. Everything seemed right. I test drove for the first time this weekend. as I started to back out the garage the first time slowly with tires straight it sounded and felt like I had a loose or half disconnected drive shaft...that was clucking around loose and shaking entire vehicle, and making it feel like the trans clutch was spontaneously slipping then grabbing very roughly while just letting out pedal slowly. I backed it out went to pull forward with the same noise, shake and slip grab feeling with hesitation, I turned the tires to back out more and then pulled ahead some same thing but worst because of added wheel resistance (which that I expected) puzzled … pulling it back in checking everything over and finding nothing wrong, I tried it the next day. same thing, couldn’t believe how it shook everything again making a terrible noise and making it feel like the trans clutch was slipping and grabbing, but I got it out of garage into the driveway, got it straight, drove forward and then reveres a few times in a straight line everything shaking , causing what felt like clutch slip and grab every time, sounded like right behind front driver tire and I could feel it in the floor board with my feet,... worst right when beginning to let clutch pedal out to engage slightly, shuttering and sounding terrible along the way…I managed to slowly get down the road, babying it the whole way, once I was rolling (out of 1st) seemed to be better and between shifts, then clutch felt closer to normal…not slip/ grab etc., but back down to any stop, straight road or turning, same thing. Made no difference if all tires were straight or if I was turning. All other gauge read out correct. with in 2 miles as planned I reached the empty parking lot and performed the break in procedure that came with lsd, essentially to drive in a figure 8 a bunch.  Did this, binding chattering, and shaking the car the whole way. I drove it back home seemed somewhat normal once I was in straight line and past 10 mph or so, and I know it will “bind” on corners and cause some tires squeal when turning especially from a stop, but when I begin to move it still causes what feels like the trans clutch to slip and jerk badly as well as shaking the entire car, and sounds terrible, that I didn’t expect. I used the fluid they supplied with LSD kit and did the breaking, planning to change fluid as they suggest after breaking, but wondering will it get smoother or less aggressive with use? maybe a 1.5 is just too aggressive for normal road driving?   I have a LSD that I put in my 71 cuda when I restored it, with amazing smooth , quite yet effective results. Different style LSD but that ones a joy to drive. maybe expecting too much from this R200?
    • Join SAU NSW for a flame-grilled feed & flame-spitting cruise! Sunday 17th August 2025 3:30PM Meeting Archies Flame Grille Sylvania Waters 4:45PM Cruise Departure 5:15PM Arrival at Cape Solander Kurnell Meet Location: Archies Flame Grille Final Destination: Cape Solander Kurnell *Disclaimer* There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAU:NSW event and will be run under a CAMS permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave.
×
×
  • Create New...