Jump to content
SAU Community

Recommended Posts

this engine is a V12 jaguar block fitted with 6CYL 24 valve twin cam head which have been converted to belt drive!Note one head had to be fitted on backwards so to have both the inlets in the centre of the engine...vast amount of work is unseen...with the cams extended,valve covers shortened..this motor is fitted in a mid mount configuration of an e type jag...The e types are very ugly..not this one!It has 11/2 feet removed from the front of the vehicle and placed at the rear...it has an RX7 series 6 hatch on the back and looking through the rear hatch screen you see the valve covers....and 12 fkn big trumpets!!!!Its wiked...F1 style front suspesion i will post some pics soon

Guest nismogtsx

We want more pics......

YEAH thats a good idea nismogtsx... YEAH

I think he is rather tallanted (i think thats how to speel it)

I wish i had the time to do that sort of stuff... You see i have a very short attention span... If it aint finished in 5 monutes id better go and have another beer.... Then when i come back to it i dont remember what i was gonna do and it ends up in the corner...

It will most likely be an I.C.V..Individuly construted vehicle...Although this guy is a M.I.A.M.E so he can do anything as long as he uses his noggin and he can get away with it.In my experience..most of the guys that issue engineer's reports dont have a fkn clue about making stuff there knowledge is all theory.

  • 5 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • A HICAS fault really should not cause the engine to go into limp mode. These cars are so old that the systems barely talk to one another. The thump might be the lockoff solenoid valve for the HICAS (the safety valve) getting closed, to lock the rear wheels "straight". I say "straight", because when my HICAS used to shit itself before I took off and nuked it from orbit, it would lock up with the rear wheels wildy non-straight and you'd need 45° of steering wheel to drive straight. Take off and nuke it from orbit. First step is to pull the smaller of the two plugs out of the HICAS CU. See if it stops misbehaving. You can also (whilst leaving it plugged in) try to get the HICAS CU into diagnostic mode by doing the pedal dance, or by connecting a CONSULT capable diagnostic reader into the car and seeing what it has to say for itself. Can't do either of these with it unplugged though. 1st gen HICAS is a ballache. I would do a complete delete. I did do a complete delete.
    • Ah. I dunno why, but I skim read your earlier post and thought the manual switch was to force it on, not force it off. I'd be tempted to have both. So, your two in series, and another in parallel with those. Or, a master arm switch, followed by the manual force on and the thermo in parallel. 6 and 2 3s.  
    • Yeah been doing it in an x shape. Do you reckon it's worth putting guide coat early where the filler isn't sanded down completely smooth? Reason I ask is because as I'm sanding it one part might be level which I don't need to sand anymore but the other part might be high so I can just focus on that instead of sanding across the whole repair area. I wonder if the putty is too thin, though the area is almost completely smooth before I do it as I've already put filler prior.
    • Just 2, and inline. One switch temp related other switch driver controlled.   I'm nearly in my head back to Arduino land for it...
×
×
  • Create New...