Jump to content
SAU Community

Thurs 24 Nov! Cruise For A Formal! B Noticed!


Recommended Posts

  • Replies 65
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

well i'm coming with a few mates, but i need the excat address never been up there also how many cars hang out there on a firday nite ?

pm me for more info thanx

btw whats gonna be happening there any chicks gonna want a lift?

well i'm coming with a few mates, but i need the excat address never been up there also how many cars hang out there on a firday nite ?

pm me for more info thanx

btw whats gonna be happening there any chicks gonna want a lift?

hey bro yer cheers

not sure about lifts

um the address is cronulla LOL

the wall

yer heaps of cars seem to hang out there aye

jus gota cruise past

i think they then go off and race at kurnell

look for cronulla on www.whereis.com.au

cheers man

  • 3 weeks later...

i might still be coming....

may have lost my original 31 2 door, but may have a meaner replacement 31 2 door soonish (hopefully :rolleyes: )

RB20 twin turbo goodness :P pray for me sons n daughters, squatmaster is hopefully making a comeback

BTW

is the meet spot still in that carpark at the end of the wall?

am i good enough?hehe~~but this time i ll probably be driving :D

Well ive never met you ;) come over and say hi, im new to the SAU and still putting faces/forum names together

hold up ppl

I dont think you can actually come intot he formal

just be there to let us in

its prestige shit it needed invites n that

i think its just for the cruise,....

shitt

i hope people didnt think they can come into the cormal itself!

  • 2 weeks later...

meh, had my formal at taronga, been there done that :P, minus the skylines and plus a falcon GT :S

Anyway.

Update:

Car SHOULD be coming off the car carrier on friday (hopefully) and into the workshop for engineering on either friday arvo or monday. It's going to be tight, but i will hopefully be there in an RB20DETT HR31 GTS-x Skyline :O (yes no typo, RB20DETT ;))




  • Similar Content

  • Latest Posts

    • So stock ECU does not like anything above 10 psi?  That Nistune one is just for "try" if it will be any different, I know it need to be tune for that. I know but YOU may know about these problem but i/we dont. They few little Skylines here let alone people who know anything about tham so that is why iam asking here  
    • So now we have a radiator with no attachments whatsoever. It lifts up with a particularly tight spot between the drivers side air box mount and the lower radiator outlet, but if you've got this far you will sort that too. This is the lower mounts with the rad out so you can see where the rubber bushes go, it is a straight shot upwards Done! Assembly is the reverse of disassembly, with blood less likely to be shed.
    • Right, onto the second last trick. The Air Con condenser is mounted to the front of the radiator and stays in the car when the radiator is removed. There are 2x 10mm headed self tappers holding the top of the condenser to the radiator, remove those The bottom of the condenser is attached to the radiator with clips. You need to lift the condenser out of those clips and clear (up, then forward). f**ked if  could work out how to do that last bit with the front bumper on. I hope you can, and you share the trick.  Bumper removal probably deserves its own thread one day once I've recovered the will to live, but basically you need to remove the wheels, front inner guard liners (clips and 10mm headed bolts), the self tapper between the guard and the bumper at the rearmost point of the bumper (same as an R32 that bit), any remaining clips at the top/front of the grill, an absolute bastard design with a plate that holds the top of the bumper above the headlight each side (only 1 bolt which is tricky to get to, but the plate catches 2 places on the bumper and must be removed....carefully!) and push clips between the bumper and guard under the headlight. If you've done all that you will be faced with wiring for the fog lights on both sides and in ADM Q50 RS at least, 4 nasty tight plugs on the driver's side for the ADAS stuff. So, the clips at the bottom look like this on drivers side (looking from the front) And on the passenger side (also from the front), you can see this one is already out Clearance on both of these are super tight; the condenser needs to move up but the upper rad support mount prevents that, and the radiator can't move down far because it is (rubber) mounted. Once you achieve the impossible and drop the condenser off those mounts so it does not stop the rad moving, you are good to go
    • OK, next the shroud needs to come off and there are a couple of tricks. Firstly, there is a loom from near the passenger side headlight to the fans, coolant temp sensor etc and there is no plug to undo.  In my case I was OK to leave the shroud on top of the engine so I just undid the passenger side fan plug and about 10 of the clips which gave enough free wire to put it aside. The fan plugs were super tight, the trick I used was a small falt screwdriver to push down on the release tab, then a larger flat screwdriver to lever the plug out of the fan unit....be careful with how much force you apply! If you need to remove the shroud altogether for some reason you will have to deal with all the plugs (tight) and clips (brittle)....good luck. I removed all of the clips and replaced them with cable ties that I will just cut next time. Also, in the Red Sport / 400R at least, the intake heat exchanger reservoir hose is bolted to the shroud in 2 places with 10mm headed bolts; so remove them (the hose stays in the car; no need to undo it at the t fittings down at the radiator lower mount. Once you've dealt with the HX hose and the wiring loom, there are 3x 10mm headed self tappers holding the top of the shroud to the radiator; remove those.   The shroud then lifts out of the bottom mounts where it sits on the radiator, up and onto the engine out of the way. Simples
    • Ok, disregard my “rate them” comment, sorry for my unrealistic input
×
×
  • Create New...