Jump to content
SAU Community

Recommended Posts

Hey guys, a whirring noise has just started coming from the air con, sounds like a lawnmower in my dash. Well, maybe not that loud :P . Does this mean the a/c motor is on the way out, any ideas on how much it would cost to replace this, or does the whole a/c unit need to be replaced? I imagine it won't be cheap either way.

Cheers.

Link to comment
https://www.sau.com.au/forums/topic/8802-whirring-noise-from-ac/
Share on other sites

i had the same problem, had paper (wtf!) caught in the fan, it was easy to get out though... (mine is a R33)

just remove the kick panel on the passenger side footwell left wall, remove the ECU, unscrew the 3 screws holding the black cylinder looking thing up into the dashboard, and gently pull it out, it houses the fan.. clear it out and stick it all back in :D 10 minute job, and i put of with the crappy noise for months!

good luck!

does your aircon work popperly? producing cold and so on.

could be the a/c compressor that is getting weared out. so remove the belts to get to a/c compressor belt and remove it too.

then turn it by hand it should turn smoothly with out any odd sound and you should also press and pull on the pulley in all directions, you are looking for clonks and wiggling. if there are any your compressor needs to be changed

matt, got the same prob. its quiet when cold, if i got it on for longer then 15 mins, starts whinning like a bitch. still cools the bastard though. dunno if its the same prob exactly as mine, but my compressors ****ed, maybe yours is too.

yep, sounds exactly like what mine has been doing, on really hot days it would struggle to keep the car cool though and i have to turn it off after a while and back on again and it starts cooling.THis was happening for about two weeks and on friday it blew up!! It started blowing hot air, then there was a burning smell and a bit of smoke from under the bonnet, I turned off and the smoke and shit went away. So now I'm without air con and it's really ****en hot. Hope this can be fixed easily. Hope yours doesn't blow up!!

i got the shits with mine and bought a second hand compressor anyway. cost me $200 but its worth it. didnt have a chance to fit it though, front brakes locked up at 100km/h and i hit a parked car, but hey, atleast now that i got the motor out, makes the compressor swap easy :P

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
    • So, now all you need to do is connect the 2 or 3x 12v feeds into the unit to permanent 12v, ACC 12V and IGN 12V that you can find in the spot behind the stereo, and the earth, and then it will switch on with the car.
×
×
  • Create New...