Jump to content
SAU Community

Recommended Posts

how much thickness did you want? i can get some thick ones (bolt on)from japan if you are interested or some thin china ones are like $20 from some tyre shops or like supercheap autos or something.

masahiro

[email protected]

randominsantity, they are legal according to welshpool, as long as they are not the slip on type.

Topaz, check to make sure your rims allow for wheels studs to come through, ie they are compatible with spacers, or you will have to attack the wheels studs with an angle grinder.

randominsantity, they are legal according to welshpool, as long as they are not the slip on type.

Topaz, check to make sure your rims allow for wheels studs to come through, ie they are compatible with spacers, or you will have to attack the wheels studs with an angle grinder.

Really? I have the bolt-on hub plates, that then have their own bolts for the rim. I was told before I took it over the pits for licensing that they were illegal so I borrowed some standard GTR rims...Yeah my studs have been shaved down too which makes things difficult if you want to put different rims on the car that actually fit properly.

Hrmm. So does that mean I don't have quite so much to worry about if for some reason the police pull me over? I freak out whenever there are cops around and pray that they don't pull me over for a "license check (aka yellow sticker)" lol.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
    • Hi.. Just another problem. So maybe you can help. I(my mechanic) done swap from my RB20DE NEO to RB25DET NEO. Everything is OK but we have a boost cut. Coils/Plugs are ok...AFM is ok. ECU is ok. I have Walbro 255 but it "changed" sound few months ago(you can hear it ouside) you did not hear that when it was new(maybe faulty?) Sooo...what now? What can cause this boost cut? It is even when you standing still...
×
×
  • Create New...