Jump to content
SAU Community

Recommended Posts

hi guys..

something is leaking in the car, but don't know what dat is..

it is connected with turbosmart boost controller,

i have picture with red circle so can you plz tell me what dat is.

and it is really bad to have leak?

do i have to tight the hose? or have to change part.

if not good to drive around until change part,, then plz tell me also..

thank you in advance..

post-16300-1127726790.jpg

Link to comment
https://www.sau.com.au/forums/topic/88976-sumfink-is-leaking-dunno-wat-it-is/
Share on other sites

hi guys..

something is leaking in the car, but don't know what dat is..

it is connected with turbosmart boost controller,

i have picture with red circle so can you plz tell me what dat is.

and it is really bad to have leak?

do i have to tight the hose? or have to change part.

if not good to drive around until change part,, then plz tell me also..

thank you in advance..

What color is the liquid and how much comes out ?

Have you just recently boosted up the turbo with that bleed valve?

Is the car running at your desired boost level (not over boosting)?

If boost is at the level you set, it is the blue bleed valve that is bleeding/leaking air out to make the extra boost, very normal :D.

If you are unsure replace the hose connected to the actuator and bleed valve

Have you just recently boosted up the turbo with that bleed valve? 

Is the car running at your desired boost level (not over boosting)?

If boost is at the level you set, it is the blue bleed valve that is bleeding/leaking air out to make the extra boost, very normal :O.

If you are unsure replace the hose connected to the actuator and bleed valve

Dam i left that part out of my post, was it air or liquid leaking ? lol :D

Nice pickup AL.

Dam i left that part out of my post, was it air or liquid leaking ? lol :D

Nice pickup AL.

Hose is connected to the turbo actuator, has to be air :D. Unless there is something drastically wrong, then this will be the least of his problems :lol:

Hose is connected to the turbo actuator, has to be air :D.  Unless there is something drastically wrong, then this will be the least of his problems  :lol:

I wasn't sure if he was trying to point out some fluid on the pipe or just saying that area has a hose leak.

Also I just saw the pics of your 2 beasts Al verry nice. Good Ol Purple one wins hands down lol.

I wasn't sure if he was trying to point out some fluid on the pipe or just saying that area has a hose leak.

Also I just saw the pics of your 2 beasts Al verry nice. Good Ol Purple one wins hands down lol.

Purple XA coupe is my mate's :D. Car is awesome, especially when you consider he finished it 9yrs ago.

I pick, speed, handling and braking any day :D

it's not a large amount.. it's small amount of leaking.. after run da car for long period of time.. when i look at it.. the liquid was leaking..

Does it seem like the liquid is comming out of the hose or is it falling onto the hose from somwhere else?

Sounds like OIL to me.

Check your OIL and COOLANT lvl's to see if they are dropping, if they you have found what's leaking, just need to find where.

Best take it to a mechanic

lol AL, thinking of this post you made.

Hose is connected to the turbo actuator, has to be air . Unless there is something drastically wrong, then this will be the least of his problems.

hbs2jh Good luck with the car mate, i hope it's just a small repairable seal or somthing like that.

I suppose it's a good thing that you have cought it while it's just a small leak.

Let us know how it turns out.

i took to ADVAN performance today..

and the leak was from INtercooler piping.. -.-//

it was dropping down from the intercooler piping where has the joint.

i have to replace the rubber part..

he quote me $80-$100 to fix it.. but i didnt' have money so couldn't fix straight away..

it is bad to have oil leak from the intercooler piping??

i just hab to change the rubber joint and tight it up..

Yes and no...............

Ideally you should only have air in you ic piping. Having enough oil to leak at the joint means you car has excessive blow-by and is not at it's healthiest. The oil will also be going into you intake system, thus causing you to loose power.

1/ Fit a big catch can (oil/air separator).

2/ Remove all ic piping and fmic, then clean them thoroughly.

3/ Start saving....... :P

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yes I can see how that would put you off HFM, especially with the price of good quality brake fluid. From what I understand it as you say the BM50 is the standard BMC for a R32 GTR, I must admit I would like to go far a Genuine Nissan BM57, but lack of cash prevents that at present. With the price being so close between the genuine BM50 and BM57 a BM57 New it seems a better choice as you gain that 1/16 bore size with the BM57, I would be interested in how much difference you feel with the BM57 fitted. I am going to take SteveL's advice in the short term and see how much actually comes out of that proportioning valve vent and save up for the Genuine Nissan part. Thanks for clarifying the HFM failure
    • Thanks mate. I just got the post inspection 1/2 done from state roads when the starter motor packed up, either that or the car alarm system is having trouble.  OEM part number 23300-AA112.
    • Hi, I though I was coming to an end in finding a replacement starter motor for a rb25de neo. I came across a starter motor from Taarks and a message below stating: Direct fit. 11 Tooth count. All below part numbers have been superseded to 11 teeth. Can some body shed some light on going from 8 teeth to 11 teeth apart from 36-month / 25,000 km warranty for passenger vehicles to 12 Month Warranty. Compatible with the following Nissan part numbers: 23300-20P00 23300-20P01 23300-20P05 23300-20P10 23300-20P11 23300-AA111 23300-AA112 23300-AA300 23300-08U10 23300-08U11 23300-08U15  
    • Low battery? Maybe check capacity? I know first-hand, on BMWs if your battery drops below 80% capacity, it starts causing strange issues.
    • 8.5 +37 = should fit rear, but I think it'll hit on front. What you want is low 30s/high 20's front, mid 30's rear. That 17" screenshot you posted looks good, I'd run it on my R32 (but that's long dead now). For tyre sizes, my rule of thumb is: 8': 235, 9": 255. But that's just my opinion. Nismo sizes: 18x8.5+35/18x9.5+38 is a good starting point.
×
×
  • Create New...