Jump to content
SAU Community

Recommended Posts

I have an rb30det for sale i got it with a vl i brought which im currently doing a spray job on, anyway im not sure what head it is it is either a 20 or a 25de head but with out measuring the valves i can't know for sure, as this thing is put together and i have never even pulled it down, it just looks so good together plus i have never had the time and interest in it.

So their for i have no idea what is in it: what rods or pistions or even if the head is suited to the block as i understand it takes a bit of machining to make a 20 or 25det head to fit (it is definently not a 25det head no vvt) i would like an offer over

$1000 but realise you would be taking a chance on it as i don't know what is in it or if the head fis at all as i said i have no interest in it what so ever. I don't know how many KM's are on the engine either.

Sorry i don't know alot about what it has in it.

So offers over $1000

Thanks Aaron

Call on 0408601054 or email me on [email protected]

It's location is North Richmond NSW

post-16956-1128513807.jpg

post-16956-1128641027.jpg

Edited by rb20siliva69
Link to comment
https://www.sau.com.au/forums/topic/89990-rb30det/
Share on other sites

hey there at the minute this is the only pic i have and it's an old one from when i brought it i had tidyed it up a lot more after i got it and then lost interest in it but i will endever to get a better photo of it.

How can you tell between the 25de and the 20 from the out side i throught that the oly diff was the valve size 25 de bing bigger and the port size other than that they look identical.

Oh and yes bare motor except exhaust mainfold and the bottom half of the inlet which has a shit attempt at being polished other than that it's a long motor.

Thanks Aaron

Edited by rb20siliva69
Link to comment
https://www.sau.com.au/forums/topic/89990-rb30det/#findComment-1623928
Share on other sites

ouch, that timing belt looks awfully close to hitting, thats a ticking time bomb if u ask me!

Listen Mate no one asked you anything. and have you everlooked at a 26 with the covers off, it's basicly the same set up so wake up.

Link to comment
https://www.sau.com.au/forums/topic/89990-rb30det/#findComment-1626416
Share on other sites

hey there at the minute this is the only pic i have and it's an old one from when i brought it i had tidyed it up a lot more after i got it and then lost interest in it but i will endever to get a better photo of it.

How can you tell between the 25de and the 20 from the out side i throught that the oly diff was the valve size 25 de bing bigger and the port size other than that they look identical.

Oh and yes bare motor except exhaust mainfold and the bottom half of the inlet which has a shit attempt at being polished other than that it's a long motor.

Thanks Aaron

sorry my bad. i could only see from the differences in the rockers covers - but anyone can swap them over, therefore i have no idea what head it is. ps. the rocker covers are rb25de, dont know if this will relate to what head is there or not..

good luck with the sale - 600hp roller and yopu have yourself a 300RWKW+ machine right there.

re: timing belt close to hitting - good one d1ck h3ad. that looks very normal to me

shaun

Link to comment
https://www.sau.com.au/forums/topic/89990-rb30det/#findComment-1630706
Share on other sites

Hey there guys i don't know if it has ever run and know idea how many km's are on it and i would like to know what head it is aswell.

If anyone is willing to make an offer we may be able to work out a better price i just want to get rid of the bloody thing. Thake up to much room in my small shed.

Link to comment
https://www.sau.com.au/forums/topic/89990-rb30det/#findComment-1632067
Share on other sites

sorry my bad.  i could only see from the differences in the rockers covers - but anyone can swap them over, therefore i have no idea what head it is. ps. the rocker covers are rb25de, dont know if this will relate to what head is there or not..

good luck with the sale - 600hp roller and yopu have yourself a 300RWKW+ machine right there.

re: timing belt close to hitting - good one d1ck h3ad. that looks very normal to me

shaun

mmmmm, good to see you've looked at plenty of engines and read the rb30 guide!

Link to comment
https://www.sau.com.au/forums/topic/89990-rb30det/#findComment-1632630
Share on other sites

im no expert but the way the top 2 intake pipes are slightly closer to the engine looks like an a rb20 (thast assuming the plenum and intake of the rb25de is same as the rb25det). if so the previous guy would have spent a lot of time and money getting a rb20 to fit on a rb30!

anywyas dude looks sweet, gluck with the sale

Link to comment
https://www.sau.com.au/forums/topic/89990-rb30det/#findComment-1632841
Share on other sites

  • 10 months later...

Hi Aaron,

I have sent you an e-mail i will have this if it is still for sale. I am in the UK. My post code is NN4 9YQ please can you work out shipping costs.

My email is [email protected] please either send me a message here or send me an email.

Please also confirm to me the payment method.

Thanks John

Link to comment
https://www.sau.com.au/forums/topic/89990-rb30det/#findComment-2469503
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...