Jump to content
SAU Community

Recommended Posts

Ok so, I've got a little problem with my poor car, and being somewhat of the mechanical noob, I figured you guys might be able to give me some idea of whats wrong, and how upset my credit card is gonna be when I get it fixed.

Basically I was driving home from work, when I noticed a loud whining sound (similar to hearing a turbo spool) when I hit boost. Thinking this was anything but good, I looked for somewhere to pull over, the car lost alot of power, and I barely made it up the hill I was on, to pull over.

Having a quick look under the hood, and at the guages etc everything seemed fine, nothing was overheating, everything was reading as normal. I managed to get home, and now the car behaves perfectly normally, except that, while the boost guage will move, it will go upto just below zero and stop there, and the car obviously isn't getting any boost. Apart from that, the car behaves exactly as before.

Someone point me in the right direction? Has my poor turbo gone up and died? (At least it would be a good excuse for a bigger one, hah). If you need anymore info, just lemme know...

Edit: I forgot to mention, apon inspection of the air filter, while not overly dirty it did smell decidedly burnt, and a small piece of foam had made its way from the funnel down to it, if that makes any difference.

Link to comment
https://www.sau.com.au/forums/topic/90273-r34-mechanical-help-needed/
Share on other sites

Is there smoke out your exhaust?

If not then it sounds like a hose has either come off or split somewhere. This is quite likely.

Keep the engine running while you listen for hissing noises indicating the leak. Might have to get someone else to rev it hard and quick to get a little spool so you can hear it.

Didn't notice any smoke, if there was any it was minor. Once I got it home, I did pop the bonnet and rev it some, I could hear what sounded distinctly like some sort of air leak coming from under the engine. All the pipes I could see seemed to be in fine condition, but from the look of it alot of the valves and seals are underneath.

So replacing a hose or valve, that sounds pretty cheap, even on an import, right? :D

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Harness is for a s1 Rb25det, and it is engine and lower harness.  the old harness had broken off plugs and was in very rough condition/exposed wires and splices etc. it is not able to be put back on the car, I could visually inspect to see if they had rewired any pins on the ecu plug. The fuel pump definitly isn’t turning off it’s an external pump and very loud you can hear it. Will look at the other harness tonight, am also going to pull the fuel rail and watch the injectors spray, will update here with what I find. Pretty sure at this point it has to be something to do with injectors because car will fire up on starting fluid and cas is clicking the Injectors. Fuel pressure is steady 43psi 
    • Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
    • I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
    • I checked spark on all cylinders and they all visually have spark with the plug pulled and grounded, but plug 1 is the only one that fouled. This was a running swap that blew up and was rebuilt by a machine shop, put a new wiring specialties harness and did all gaskets, studs, and bolts while it was out.  compression is 135-150 across all cylinders. Aside from that from my understanding with the z32 ecu and maf the car should start regardless. The wiring for TPS and the dual 02 sensor/ dual knock sensor stuff shouldn’t actually stop the car from starting or even running well, (just slightly rich)  they just give fault codes. Car supposedly is supposed to start as long as you have z32 afm and ecu with the nistune base map and that’s info coming from a well known and trusted tuner who does a lot with SR/RB (Rsenthalpy). After more trouble shooting today where I’m at right now is that the cas is sending signal to the injectors they click while spinning the rotor, Fuel pressure is now set at 43psi, all cylinders have good compression and all of the plugs looked great (just wet with fuel) except for cylinder 1 which was very black (cylinder 1 has 150psi compression). all of the coils generate spark if pulled out and grounded out on the head. On the fuel pump car just pops into the exhaust. On starting fluid car will fire off. Hard to tell if all cylinders are firing off but definitley a couple. sounds like all of them but it’s only for 3-5 seconds hard to tell. 
×
×
  • Create New...