Jump to content
SAU Community

Recommended Posts

OK, thought I should put this thread in to help out others in the future.

A Clarion 4-channel amplifier (edit: installed behind sub)

A Clarion 6-stack CD player fits fine under the passenegers seat, easy to get to.

A Clarion subwoofer in custom box can be easily strapped into the wagon space, and can beremoved when that space is needed.

Head unit: Clarion with tape player, fully adjustable.

Front speakers: Pioneer 6.5inch 4-way speakers, 16cm diameter, 91db, 57mm mounting depth, model TS-A1681S, 260w (fantastic)

Rear speakers: Eclipse 6.5inch 3-way speakers, 80w only but good for 90db, 49mm mounting depth - any bigger & it wont fit due to baffles that are in that rear door area (have been told the baffle stops water getting on the speakers - so dont take them out!)

Standard speakers, as SK has mentioned before, are Clarion 15w, maxed outr at 30w. Mine were terrible. Juncked them in the bin.

The sound is unbelievable. Awesome bass etc. Wicked!!

Make note of the rear door mounting depth..... :D

Best of luck, brendan

Edited by bwilkeson
Link to comment
https://www.sau.com.au/forums/topic/90275-stagea-stereo/
Share on other sites

  • Replies 57
  • Created
  • Last Reply

Top Posters In This Topic

I think I posted mine somewhere........

Nakamichi head unit, in the top single din slot

Nissan Pathfinder flip top box in the other (bottom) din slot, silver lid matches the Stagea dash and console surround

Soundstream 4 channel amp 120 watts per channel mounted where the standard stacker goes in the LHS rear 1/4 inner guard (the ATTESA reservoir is in the RHS 1/4)

MB Quart DKE116's in all foor doors

They are 165mm diagonal between the mounting holes and 180 mm total diagonal. Bit tricky to fit as the MB's are perfectly round and the standard speakers are a rounded off square. No problem with depth though.

I use the rear for carrying stuff far to often to have a sub, the MB Quarts do a pretty good job and I am not into doof, doof anyway.

:D cheers :blink:

Edited by Sydneykid
Link to comment
https://www.sau.com.au/forums/topic/90275-stagea-stereo/#findComment-1628214
Share on other sites

SK... i was actually thinking the other day about what amp would fit in that lhs 1/4.... which soundstream model are u running.. an older series or the newer range stuff?

brendan... my r33 came with an amp under the drivers seat.. i found my front seat got rather warm after a spirited session of music listening.....

and the amp came out looking like it had been in the car for 30 years.... does the amp go snuggly under the seat? might consider it under the passenger seat if so..

Link to comment
https://www.sau.com.au/forums/topic/90275-stagea-stereo/#findComment-1628495
Share on other sites

SK... i was actually thinking the other day about what amp would fit in that lhs 1/4.... which soundstream model are u running.. an older series or the newer range stuff?

brendan... my r33 came with an amp under the drivers seat.. i found my front seat got rather warm after a spirited session of music listening.....

and the amp came out looking like it had been in the car for 30 years.... does the amp go snuggly under the seat? might consider it under the passenger seat if so..

Yeah, well, I had a good look at the system last night, after the post here, and saw that the damn amp was on the back of the subwoofer still (as it was in my VR).

Couldnt believe it, as that wasnt how it was arranged beforehand..... BUT, having said that, the amp/sub box fits extremely well in the LHR rear qrt panel area, right between the wheelwell and the rear door. Almost fluch mounted in line with the wheelwell, so I'll leave it there.

So I'll add an edit to the first post. Yup SK, had read your thread, just wanted to let ppl know about rear door speaker thickness.

Link to comment
https://www.sau.com.au/forums/topic/90275-stagea-stereo/#findComment-1628809
Share on other sites

Yeah, well, I had a good look at the system last night, after the post here, and saw that the damn amp was on the back of the subwoofer still (as it was in my VR).

Couldnt believe it, as that wasnt how it was arranged beforehand..... BUT, having said that, the amp/sub box fits extremely well in the LHR rear qrt panel area, right between the wheelwell and the rear door. Almost fluch mounted in line with the wheelwell, so I'll leave it there.

So I'll add an edit to the first post. Yup SK, had read your thread, just wanted to let ppl know about rear door speaker thickness.

Well my head unit is a Pioneer DEH-P1Y MOSFET with CD/MP3/WMA capability - 60Wx4 and is mounted in the lower DIN slot - upper slot retained for 3 X guages.

Front speakers are 6" splits - Focal 165KP"s - 80W RMS.

Rear speakers are Alpine SPS 170A's, Co-Axial 2 way - 40W RMS.

The amp is an Eclipse EA3422 - 4 X 50W RMS. The amp hides under the drivers seat.

A bit of a hybrid mix but all components definately compliment each other and produce exceptional soudn quality.

Current plans cater for a CD stacker to go under front passengers seat, but not planning on mounting a sub-woofer - need the back area for carrying.

Marc2

Link to comment
https://www.sau.com.au/forums/topic/90275-stagea-stereo/#findComment-1628835
Share on other sites

The small sub box with woofer and amp sits snuggly behind that LH wheel-well. Still great for carrying loads as it doesnt hinder the space, plus can still have the odd drive-in movie experience!

Link to comment
https://www.sau.com.au/forums/topic/90275-stagea-stereo/#findComment-1628881
Share on other sites

No way I could fit a sub on the rear, I had 8 wheels and tyres in there last week and an RB25DET gearbox. That took up every square inch of space.

The Soundstream amp is about 6 years old. It did good service for about 2 years and then sat unused for 3 years until the Stagea needed its services. I like the sound, not to harsh so it suites the MB Quartz very well.

Is there some difference to the current Soundstream amps?

:D cheers :O

Link to comment
https://www.sau.com.au/forums/topic/90275-stagea-stereo/#findComment-1629167
Share on other sites

SK.. the older soundstreams had very good construction and execellent SQ...

the newer ones just didnt have the same standard as the old ones......

Excelleant, good info, how old is " the older soundstreams"? Is my 6 year old one old or new?

:D cheers: )

Link to comment
https://www.sau.com.au/forums/topic/90275-stagea-stereo/#findComment-1630917
Share on other sites

I made a custom Sub box with 2 x 10" woofers and a 5 channel amp last year, i had pics of it up a while ago but they've gone now. i made the box shaped to the back of the wagon and it fits nicely between the towers and under the boot cover.

In the front i have a pioneer MP3 head unit something, i forget the model number, 5*** series

pioneer kevlar 250W splits in the front, and pioneer 4 way 220W 6" in the rear doors. sound is awesome and can barely be heard outside the car.

i run the splits and subs off the amp, and the rear speakers off the head unit. bit odd, but it gives the best response.

Link to comment
https://www.sau.com.au/forums/topic/90275-stagea-stereo/#findComment-1631028
Share on other sites

I made a custom Sub box with 2 x 10" woofers and a 5 channel amp last year, i had pics of it up a while ago but they've gone now. i made the box shaped to the back of the wagon and it fits nicely between the towers and under the boot cover.

In the front i have a pioneer MP3 head unit something, i forget the model number, 5*** series

pioneer kevlar 250W splits in the front, and pioneer 4 way 220W 6" in the rear doors. sound is awesome and can barely be heard outside the car.

i run the splits and subs off the amp, and the rear speakers off the head unit. bit odd, but it gives the best response.

Sounds like we nearly have the same system, does your pioneer mp3 player have the blue and orange colours and moving pictures?

I got mine all from ebay and saved a lot of money.

Link to comment
https://www.sau.com.au/forums/topic/90275-stagea-stereo/#findComment-1631056
Share on other sites

It has 2 knobs on each side, it's blue colour but doesn't have any pictures. It's the 5650 i just remembered. my mate has the 5750 and it has the pictures on it. I got it at summernats last year from the JB hifi shop and saved about $300 on it. everything i bought was on massive sale, i'm not a retail-paying chump

Link to comment
https://www.sau.com.au/forums/topic/90275-stagea-stereo/#findComment-1631111
Share on other sites

My sub and front speakers are off the amp, and rear speakers are off the head unit. Good allround response.

I too can hardly hear the doofdoof music when standing outside the car, very loud inside but quiet as outside. Nice.

Link to comment
https://www.sau.com.au/forums/topic/90275-stagea-stereo/#findComment-1631305
Share on other sites

my doors (both front & rear) will be getting a few sheets of this stuff put in when the stereo goes in.

If you want sound deadening, this would be the stuff to go for.

http://dynamat.com/

Sydneykid....have you got any pics of your amp mounting location, as l think mine's gonna have to go in the boot as well somewhere.

Link to comment
https://www.sau.com.au/forums/topic/90275-stagea-stereo/#findComment-1631416
Share on other sites

http://dynamat.com/

Sydneykid....have you got any pics of your amp mounting location, as l think mine's gonna have to go in the boot as well somewhere.

I have some pictures of the standard CD stacker that was there before I put the amp in. I just removed the stacker and bolted in the amp, I made up a couple of 3mm aluminium brackets to adapt the amp shape to the stacker mounts. I will take some pictures of the amp tomorrow and post them up.

Rear_LHS_Storage.jpg

Rear_LHS_Stacker.jpg

:) Cheers ;)

Link to comment
https://www.sau.com.au/forums/topic/90275-stagea-stereo/#findComment-1633249
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Apologies for the long post, but needed somewhere to lay out the entire timeline of events and actions taken:   I've got an 89 GTR with a R34 RB in it. It's been running great all year, driven probably 500KM in the last month. It's not my daily driver, just a weekend fun car.    Build info: R34 RB26 - HKS 2.7 stroker kit, HKS adjustable cam gears, HKS turbo upgrades, Trust intercooler, R34 factory DENSO 440cc injectors, JUN chipped/tuned R32 ECU. All of this work was performed in Japan back in 2019.    Thursday 10/2/25 - It's a nice day and decided I'll drive it to work, I start it up in the garage and I notice it took a few extra cranks and sounded a bit funny. I figure maybe it was just because it was a pretty chilly morning. I pull it out into the driveway to warm up a bit before leaving. As I leave the driveway, it feels very off and sounds like a misfire. I pull it back in the garage to deal with after work and take the daily to work. I was able to diagnose it as a cylinder 5 misfire with the old spark plug test (unplugging each plug until a sound change with the engine running). I take off the whole ignition system, ignitor, plugs, spark. *Important note, it is still on the R32 ignition system with the separate ignitor system. I test each system with a multi-meter and nothing presents as a smoking gun. I put it all back together and it starts up no issue. I go ahead and order the PRP R35 ignition conversion kit. It should arrive today (10/13/25)   Friday 10/3/25 - Another nice day, car starts up great and drives great all day. Very pleased that everything seems to be OK   Sunday 10/5/25 - Decided I'll take it to play some golf, load up and drive to the course about 25 minutes away. Drives wonderful the whole way there, I pull in the parking lot and the engine completely comes to a stop. I do not recall if it sputtered at all, but just remember all of the sudden the engine was off. I roll it into a parking spot, try to crank it back on and nothing.  It'll crank and crank and not even try to start. End up getting it towed back to my house and push it up into the garage.    Items I have checked: Fuel in the tank Fuel Pump relay Fuel pump fuse  Spark Plugs & gap Coil packs Ignitor    I know the cylinders are getting fuel as the plugs smell like fuel after a start attempt. I tried spraying starter fluid into the manifold and cranking and not even a sputter.    I decided to do the live CAS test (removing the the CAS, ignition on and spinning the CAS stalk to see if the injectors pulse and spark is active). All of the injectors were pulsing and I have spark at the plug. The half-moon end of the CAS did seem very loose, I'm not sure how much play is supposed to be there, but it was more than I expected. There was no in/out play of the shaft, just the tip end that is pinned on had quite a bit of play.    CAS Play video   When I put the CAS back in, I stupidly did not re-time the engine. I know I need to do that tonight, however, I do not think it will start given it seemingly was not the issue. My plan is to do the PRP R35 coil kit and retime the engine at the same time.    I plan on ordering the Haltech Nexus Plug-in ECU once they are available again, but ideally would like to get this sorted before firing the parts cannon at it and potentially adding more variables.    Anything glaring that I am missing here, I'm a bit at a loss?          
    • Get it on a dyno. Get something logging Consult. Run it up and find out what is causing it.
    • Looking for a plenum for rb25 de+t neo  Not looking to push much power maybe 300kw at the wheels, is there much difference in flow for Freddy “Greddy style” compared to original Greddy or options like Proflow or Otaku garage?    I won’t be porting the de Neo head for now as I think it’ll be fine 280-300rwkw but appreciate the help and any experiences anyone has between them and any advice. Thanks  Looking at this plenum for now below 
    • engine wise almost no mods: stock ecu Greddy front mount intercooler Greddy forward facing intake w R33 TB stock fuel system, stock injectors, rail etc. Kakimoto racing hyper 3 inch exhaust system Apexi intake filter New NGK –R BCPRES (.8 gap) plugs  
    • Nice one @Pac - looks like a fair few 1600's there! 
×
×
  • Create New...