Jump to content
SAU Community

Rb25/rb26 (conrods 2 Sets) Rb26 Je Forged Pistons

varun_gtr
 Share

Recommended Posts

varun_gtr Enthusiast

varun_gtr

Posted
Posted

Urgent Sale

JE pistons and strengthened rods were previously run in my engine and are being changed for a what i hop to be a stroker kit.

JE forged pistons standard bore size, only half a millimeter over standard bore so will fit with a light hone.

The JE pistons can withstand a lot of power and only have to be sold because i cannot use them with any stoker cranks or rods.

Standard connecting rods, race prepped and strengthened, beam polished and shot peened and are in excellet condition.

Rods are capable of holding up to 600hp at the flywheel with all the right assistance, oil cooler and larger oil pump etc.

Prefferably want to sell those pistons and rods as a set for $1300 mind you they are second hand, condition is perfect.

These as a set will handle 600hp day in day out and JE pistons must need warming up at idle for a good 7-10 minutes time before driving. These rods are sized for the gudgeon of the JE pistons so no furhter work required on parts, balancing etc.

Also for sale, second hand perfect condition hks con rods with stronger carrillo rod bolts to avoid bolt stretch. Have been crack tested and balanced, but will need minor balancing to suit your crank and pistons, $1400 for the hks con rods and stronger bolts.

If you are genuinely interested let me know i am negotiable on prices for both things. email me [email protected] sms or call on 0401376402. And if you are inquring on here, please pm or email me because i dont know how to check my posts :D . remember its an urgent sale, thanks ppl.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      RB26DETT Sketchy boost mod?

      By GTSBoy · Posted

      There's restrictor pills in the stock boost control hoses. That's how they set the amount that was bled off and hence the "high" boost setting. The usual mod in the day was to remove it and send the "high" boost setting up to about 14 psi.
    • ARB26
      RB26DETT Sketchy boost mod?

      By ARB26 · Posted

      Thanks Duncan, that's the best info I've read. Furthermore after learning about the PCM programming side controlling the factory boost solenoid, the purpose of the solenoid is to "bleed" boost when pin 25 is earthed, thus allowing spring pressure in the wastegate actuator to overcome diaphragm boost pressure, thus closing or reducing the position of the wastegate flap creating more boost as the turbo is able to spin faster. It's pretty cool to see a designated Pill to do exactly this, would have liked to have seen it with a tiny filter over the end for those moments in vacuum.  The constant bleed pill has now been removed completely from the system and solenoid boost control has been restored once again.   Case closed 😂
    • GTSBoy
      Cas issue

      By GTSBoy · Posted

      The wideband reading is meaningless if it's not running. Why are you using shitty old sidefeeds on any engine, let alone a Neo? What manifold and fuel rail are you using to achieve that? Beyond that, can't help you with AEM stuff as I've never been their ECU/CAS combo.
    • Duncan
      RB26DETT Sketchy boost mod?

      By Duncan · Posted

      Manual boost controllers (where a little of the boost was bled off) were quite common back in the day, because they were cheap and easy. Generally they had a manual adjustment screw rather than being fixed like yours. Down side is they always bleed boost, not just when you want them to so an electronic boost controller that uses a solenoid will have less lag.
    • nash47
      Cas issue

      By nash47 · Posted

      Hello , im new here and i have A31 home build  RB25det neo stock eng / turbo  aem ems 2 blue connector  aem 3.5 map aem cas disk aem wideband connected to ecu  355 lph pump 550 nismo yellow injectors side feed aftermarket regulator  and won’t start with base aem tuner basic tune eventually flipped cas 180 degree so it triggers on correct stroke not in exhaust cycle  Now it won’t start Wideband reads 10 and 11 at lowest fuel setting  and will share calibrations soon for aem tuner i think something is wrong in aem tuner    please if you have any information, am very grateful         
×
×
  • Create New...