Jump to content
SAU Community

Recommended Posts

Item: Z32 VG30 Turbo price drop

Location: Melbourne

Item Condition: Very minimal shaft play - came out @ 90,000kms

Price and Payment Conditions: $220

Extra Info: Delivery anywhere at buyers cost

Contact Details: PM or post up or call 0408578627

The turbo came out of my Z32 which i had imported recently..In Japan, some goose left a rag in the left hand turbo so it gave up..The right hand turbo is in perfect working order though..

Thanks in advance,

nuR

Edited by nuR.spec
Link to comment
https://www.sau.com.au/forums/topic/91428-vg30-turbo/
Share on other sites

  • 2 weeks later...

I thought I'd let you all know this guy isn't selling a VG30 as advertised..

They are Garrett T25 which are standard on SR20 and CA18's.

I bought the faulty one off him as I wanted the VG30 turbine for a Hi-flow, I didnt know what a VG30 looked like so I bought it having trusted that the seller was actually selling what he claimed was a VG30.

Now he won't give my money back and has spun some sh!t.

Link to comment
https://www.sau.com.au/forums/topic/91428-vg30-turbo/#findComment-1669863
Share on other sites

I thought I'd let you all know this guy isn't selling a VG30 as advertised..

They are Garrett T25 which are standard on SR20 and CA18's.

I bought the faulty one off him as I wanted the VG30 turbine for a Hi-flow, I didnt know what a VG30 looked like so I bought it having trusted that the seller was actually selling what he claimed was a VG30.

Now he won't give my money back and has spun some sh!t.

If its from a Z32 then its actually smaller than those found on SR's & even CA's.

This is what you have

Turbo: T25/T2 Hybrid

Car of origin: Z32 300ZX

Engine: VG30DETT

Flange: 4 bolt

Max power: 130kW

Max boost: 1.0 bar

Housing sizes: Exhaust 0.48 AR, compressor 0.49 AR

Comments: The 4 bolt flange will fit most Nissan 4 cylinder turbo manifolds. It’s a very small & reasonably inefficient turbo & should only really be considered for replacing a failed unit.

They also have their roots in the ET Pulsar & in the TT 300ZX’s all the way up to their last release in 2000. They do have a steel wheeled compressor.

This is what you were after

Turbo: VG series

Car of origin: Gloria, Z31 300ZX

Engine: VG30DET

Flange: 4 bolt T3 style

Max power: Approx 195kW

Max boost: 1.2 bar

Housing sizes: AR not identified

Comments: These have a slightly larger exhaust housing than the turbos on the RB25’s, but have a marginally smaller compressor with different trim. These turbos are a ball bearing core with a steel compressor wheel. No ceramics here! They should be cheaper than the RB turbos & are suitable for RB20’s, SR’s & CA’s

Point of interest also, the VG series turbo never had T25 stamped into it & the same goes with AR ratios

This info & more can be found @ www.thecarscene.com

Sorry to hear about this, its not good at all. I hope things can be worked out.

James

Link to comment
https://www.sau.com.au/forums/topic/91428-vg30-turbo/#findComment-1670180
Share on other sites

Are you sure your tuner wasn't high on something?

http://www.nissansilvia.com/forums/index.p...howtopic=121194

Read for yourself mate..before you jump to conclusions, i suggest you read..wait, before you do that, get a decent tuner!

Btw, i clearly stated that it was off a DETT

In Japan, some goose left a rag in the left hand turbo so it gave up..The right hand turbo is in perfect working order though..
Edited by nuR.spec
Link to comment
https://www.sau.com.au/forums/topic/91428-vg30-turbo/#findComment-1671316
Share on other sites

yea VG30DETT ...... TT m8 .. not T

being they are the smaller version.... just look at the compressor and exhaust housing sizes.. they are TINY as.

VG30DET .. which i have to my left right now has OP6 on the exhaust housing .. casted onto it. and the Comp housing as Nissan and 45V2

where as yours has garret and the exhaust housing .. going by the pics on NS.com .... is FAR smaller again than the SR/CA turbos

youve ripped this poor bloke off.... make things right man.

Link to comment
https://www.sau.com.au/forums/topic/91428-vg30-turbo/#findComment-1673016
Share on other sites

You've proven that it is some type of VG30 and you would have known when I told you I had plans for the hi-flow and large VG30 turbine housing for my RB25 that this wouldn't be for me.

But I guess you didn't care and you were happy to take the money and not give it back when I've realised it's no good to me.

Anyway Karma's a bitch mate! When you do wrong to one person it'll come back to you some day.

Good luck with your sale.

Link to comment
https://www.sau.com.au/forums/topic/91428-vg30-turbo/#findComment-1673195
Share on other sites

Thanks you just explained it all.

Maybe sellers should post up the correct details next time they sell stuff!

No problem. I work for Nissan Australia & i am 'the tech man' @ thecarscene.com so let me if you need any more info.

It does pay to be very specific when buying or selling stuff as mis representation can bring on public arguements like this. Which no one wants or needs.

Sorry to hijack,

James

Edited by Jaymz
Link to comment
https://www.sau.com.au/forums/topic/91428-vg30-turbo/#findComment-1674293
Share on other sites

Turbo: T25/T2 Hybrid

Car of origin: Z32 300ZX

Engine: VG30DETT

Flange: 4 bolt

Max power: 130kW

Max boost: 1.0 bar

Housing sizes: Exhaust 0.48 AR, compressor 0.49 AR

Comments: The 4 bolt flange will fit most Nissan 4 cylinder turbo manifolds. It’s a very small & reasonably inefficient turbo & should only really be considered for replacing a failed unit.

They also have their roots in the ET Pulsar & in the TT 300ZX’s all the way up to their last release in 2000. They do have a steel wheeled compressor.

is this the turbo you are selling nur.spec?

or is it this one

Turbo: VG series

Car of origin: Gloria, Z31 300ZX

Engine: VG30DET

Flange: 4 bolt T3 style

Max power: Approx 195kW

Max boost: 1.2 bar

Housing sizes: AR not identified

Comments: These have a slightly larger exhaust housing than the turbos on the RB25’s, but have a marginally smaller compressor with different trim. These turbos are a ball bearing core with a steel compressor wheel. No ceramics here! They should be cheaper than the RB turbos & are suitable for RB20’s, SR’s & CA’s

Edited by whyte
Link to comment
https://www.sau.com.au/forums/topic/91428-vg30-turbo/#findComment-1675506
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • God damnit. The only option I actually have in the software is the one that is screenshotted. I am glad that I at least got it right... for those two points. Would it actually change anything if I chose/used 80C and 120C as the two points instead? My brain wants to imagine the formula put into HPtuners would be the same equation, otherwise none of this makes sense to me, unless: 1) The formula you put into VCM Scanner/HPTuners is always linear 2) The two points/input pairs are only arbitrary to choose (as the documentation implies) IF the actual scaling of the sensor is linear. then 3) If the scaling is not linear, the two points you choose matter a great deal, because the formula will draw a line between those two points only.
    • Nah, that is hella wrong. If I do a simple linear between 150°C (0.407v) and 50°C (2.98v) I get the formula Temperature = -38.8651*voltage + 165.8181 It is perfectly correct at 50 and 150, but it is as much as 20° out in the region of 110°C, because the actual data is significantly non-linear there. It is no more than 4° out down at the lowest temperatures, but is is seriously shit almost everywhere. I cannot believe that the instruction is to do a 2 point linear fit. I would say the method I used previously would have to be better.
    • When I said "wiring diagram", I meant the car's wiring diagram. You need to understand how and when 12V appears on certain wires/terminals, when 0V is allowed to appear on certain wires/terminals (which is the difference between supply side switching, and earth side switching), for the way that the car is supposed to work without the immobiliser. Then you start looking for those voltages in the appropriate places at the appropriate times (ie, relay terminals, ECU terminals, fuel pump terminals, at different ignition switch positions, and at times such as "immediately after switching to ON" and "say, 5-10s after switching to ON". You will find that you are not getting what you need when and where you need it, and because you understand what you need and when, from working through the wiring diagram, you can then likely work out why you're not getting it. And that will lead you to the mess that has been made of the associated wires around the immobiliser. But seriously, there is no way that we will be able to find or lead you to the fault from here. You will have to do it at the car, because it will be something f**ked up, and there are a near infinite number of ways for it to be f**ked up. The wiring diagram will give you wire colours and pin numbers and so you can do continuity testing and voltage/time probing and start to work out what is right and what is wrong. I can only close my eyes and imagine a rat's nest of wiring under the dash. You can actually see and touch it.
    • So I found this: https://www.efihardware.com/temperature-sensor-voltage-calculator I didn't know what the pullup resistor is. So I thought if I used my table of known values I could estimate it by putting a value into the pullup resistor, and this should line up with the voltages I had measured. Eventually I got this table out of it by using 210ohms as the pullup resistor. 180C 0.232V - Predicted 175C 0.254V - Predicted 170C 0.278V - Predicted 165C 0.305V - Predicted 160C 0.336V - Predicted 155C 0.369V - Predicted 150C 0.407V - Predicted 145C 0.448V - Predicted 140C 0.494V - Predicted 135C 0.545V - Predicted 130C 0.603V - Predicted 125C 0.668V - Predicted 120C 0.740V - Predicted 115C 0.817V - Predicted 110C 0.914V - Predicted 105C 1.023V - Predicted 100C 1.15V 90C 1.42V - Predicted 85C 1.59V 80C 1.74V 75C 1.94V 70C 2.10V 65C 2.33V 60C 2.56V 58C 2.68V 57C 2.70V 56C 2.74V 55C 2.78V 54C 2.80V 50C 2.98V 49C 3.06V 47C 3.18V 45C 3.23V 43C 3.36V 40C 3.51V 37C 3.67V 35C 3.75V 30C 4.00V As before, the formula in HPTuners is here: https://www.hptuners.com/documentation/files/VCM-Scanner/Content/vcm_scanner/defining_a_transform.htm?Highlight=defining a transform Specifically: In my case I used 50C and 150C, given the sensor is supposedly for that. Input 1 = 2.98V Output 1 = 50C Input 2 = 0.407V Output 2 = 150C (0.407-2.98) / (150-50) -2.573/100 = -0.02573 2.98/-0.02573 + 47.045 = 50 So the corresponding formula should be: (Input / -0.02573) + 47.045 = Output.   If someone can confirm my math it'd be great. Supposedly you can pick any two pairs of the data to make this formula.
×
×
  • Create New...