Jump to content
SAU Community

Recommended Posts

Items: Brand new garret gt28/60, t28 flange rated at 320hp A/R ratio of 48/49

for a quick spooling rb20 or sr20 retail $1499 sell for $1000 check here for

specs http://www.turbobygarrett.com/

Now 900

z32 air flow meter $300------now250

Standard r33 series 1 computer (manual, turbo) $300---- now $250

standard r32 Exhaust manifold $80 ---------now $70

Set of 6 coilpacks rb20 (will not seperate) good condition upgraded to

splitfire's (however fouling on 15psi) anything under that is fine $200

------- now $175

standard r33 AFM perfect working condition $150 --- SOLD

r33 standard air box $60 -------Now $50

Flyn BOV (off ebay) take it off me for $30 works fine

R32 Turbo and dump with wastgate and heatsheild. perfect condition not

blowing smoke very minimal shaft play came out of a 93 gtst with102k

$300

R32 Injectors cleaned and flow tested set of 6 (will not seperate) upgrade

for c18 (i think) 250 cost me $30 to clean each injector

Location:Sydney

Item Condition:everything is in good working condition

Reason for Selling: items have either been upgraded or are no longer needed

Price and Payment Conditions: price as above payment can be arranged

Extra Info:pick up prefered but will post anywhere in australia at buyers expense

Contact Details:PM or call on 0411 574 412

Edited by black sky
What is the CHRA or turbo part number off the ID plate please?

I take it this is not a GT2860RS.

cheers

The turbo number it 705329-2

the char number is 431876-126

and the ar ratios are .48 comp and .49 turbine good for 220rwkw

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • This looks great! Awesome to have the 5 speed with an LSD in this. The Recaro's look like SR2's or SR3's. It's a shame they've been retrimmed as they would have looked sweet in their original colours. I think I'd want my agent to be a little more up front and informative too. I've never imported but I reckon it would make me a little nervous, so the more info the better.
    • Thanks for doing that Duncan! Makes you a good person in my books. We don't get kangaroos or wombats here. But we have bats and it's similar. AFAIK it's often the mums with a baby attached that get hit because they drop lower when starting from a tree. If you hit an animal, check on it. https://www.ifaw.org/au/resources/wildlife-rescue-app An app to get the closest wildlife rescue contact.
    • My dream is also to have a proper hoist, but I don't think it will ever happen. My quickjack is probably as close as I'll ever get, it really is very good though. 
    • Yeah we keep on in the dailies, it is pretty poor how many animals get hit and the driver leaves without checking....have saved a couple of little ones over the years. Bit of a gruesome job though, pouches generally need to be cut open because they are so tight and often the joey doesn't realise mum is gone so they are still locked onto the teat. I checked the modules in front of the DS wheel where an oil cooler should go.... There is the radar unit - that can go for race use) One of the 2 HX water pumps, the silver cylinder. That needs to be kept but might be able to be relocated But the bad news, the big computer mounted vertically in front of the wheel (blocking any potential air exit) is the electric steering computer. That is required until/unless i do a hydraulic steering conversion, and in CAD based modern car design it is not like I can just pop a big unit like that somewhere else (plus the loom would be too short anywhere else too). So, the passenger side is OK to clear out (just use a smaller washer reservoir, potentially elsewhere), but the DS no beuno
    • Well, all the best with the new camry It was interesting to hear about the UK process, it is generally a lot more streamlined here with a shipping agent looking after all the import side (noting the exact final price can still be a surprise.....) and I've used a few different brokers on the japan (or US) side, and never had any trouble with any of them....luck of the draw I guess. You mentioned you didn't get the auction sheet (understandable since you bought it from a dealer, not auction), but I always try and get hold of that because they are pretty thorough. I've imported 2x R grade vehicles over the years and both were fine, repairs in Japan are pretty thorough compared to here in Oz.
×
×
  • Create New...