Jump to content
SAU Community

Recommended Posts

Does anyone know what a safe psi level should be for an RB20DET before it has pinging probs.

Internally stock but has HKS T3G and a HKS fin & tube cooler from a FJ20 that's not real big. Air temp at the butterfly when cruising will stay aroung ambient temp but start boosting and it can rise to 60 degrees with ambient being 25-30 degrees.

It pings when boost is at an indicated 17-18psi if it starts getting hot.

Other mods include APEXI a/f and i/t piggy backing a standard ECU however this engine doesn't seem to have a rev limit? 9000rpm still no cut???

Has Blitz dual stage boost control, Blitz BOV, R33 GTR fuel pump, HKS pod filter and 3 inch from turbo back with N1 muffler.

I always run Optimax and used a Octane booster aswell once, but still pinging when close to 20psi. Any knowledge on this problem would be greatly appreciated.

Link to comment
https://www.sau.com.au/forums/topic/9257-pinging/
Share on other sites

Pinging sux. Personally I would be getting the car on a dyno so they can sus it out. Pinging is caused by too much heat in the combustion chamber, which is increased by many things, compression, boost, air temp, fuel octane rating (octane rating refers to the resistance to detonation), A/F ratios, ign timing, etc.

The safest thing to do would be to turn the boost down until you can get it on a dyno. The other thing to do would be to not go putting your foot down if you have been stuck in heavy traffic, as your coola gets saturated with heat and will not cool efficiently until you get moving again - so if you have to put your foot down wait until the intake temp comes down a bit first.

Finally it is possible you may not be able to run that sort of boost with your current set up, ie insufficient intercooling, too high a compression ratio or ambient temp just too high.

If you find yourself a decent tuner, alot of your questions may be answered, until then without knowing your exact setup, it is a bit of guesswork.

Steve

Link to comment
https://www.sau.com.au/forums/topic/9257-pinging/#findComment-138810
Share on other sites

Thanks for your advise, I'm happy to know it's not some other weid prob and will defiinately keep below 14psi until I fit beter cooler and maybe fuel reg and injectors then onto dyno for tuning.

Looking forward to getting this thing out on the track soon and meeting some like minding people.

Cheers!

Link to comment
https://www.sau.com.au/forums/topic/9257-pinging/#findComment-138854
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • An update regarding the registration with the DVLA I sent off the paperwork the day after I collected the car from the port, two weeks later it was all returned with a letter explaining they have rejected the application. This was because the cheque was £20 short for the road tax (I used a price list I found online). Nevermind it is what it is, it was sent back to them the following day with a new cheque. Fast forward another 2 weeks or so, I called them for an update to be told it had been rejected. Yesterday (16th September) I received the documents back along with another letter, this time it was because I didn't put an X in one box on the V750 (personalised number plate certificate), which declared that I had the rights to the personalised number plate. Why this wasn't mentioned in the first rejection letter, I don't know, but it could have saved this headache. The documents were sent back today, so fingers crossed third times a charm and it'll FINALLY be registered on the road just in time for the bad weather (woohoo!) To cheer myself up I lowered the front 25mm, was sick of seeing it sit like a monster truck. No idea how much clearance I'll have getting on and off the driveway, I'll worry about that when I can actually drive it
    • You're going to miss not worrying about rust in the strut towers like the Skyline shitboxes out there
    • A few little updates that weren't filmed due to not taking long to do or not interesting enough for their own video. My new K&N Air Filter arrived, I went with an RU-4180 which matched the dimensions of the universal cone filter the car originally had.  The battery had gone flat, while that was charging I tidied up the spaghetti wiring at the bulk head and down the sides of the engine Next job was to swap the stereo The Kenwood harness had the female ISO plugs cut off and the male ISO plugs cut off the adaptor loom and joined with bullet connectors. I ordered in a repair loom through work and re-did it all. New Kenwood unit installed (Android Auto, DAB, Bluetooth, Reverse Camera) The bonnet/hood gas struts have been poor since collecting the car. I couldn't find any suitable replacements locally so took a chance on a pair from AliExpress.  The originals don't use a retaining clip to secure the cup onto the ball fixture, would explain why I struggled for 10-15mins trying to pry off the cups. The ball fixtures unscrew using a 12mm spanner, new ones are the same size. Sadly no photo of them fitted, you're not missing much lol The dished Momo steering wheel got replaced with my Momo Tuner, turns out I ordered counter sunk bolts for the horn trim ring (like they normally are for the steering wheel) instead of allen cap (flat seat)  A terrible photo of a Quaife style gear shift knob I've had stashed in my tool box for many years after purchasing the incorrect thread size (I can see a pattern emerging with ordering incorrect parts...) Also threw in a cup holder and a (empty) Boss Coffee can, because why not  
    • GT-R clearly the better choice! The 300 is certainly not insaly fast but has a decent amount of poke. Does a nice little drift around the corners with a decent amount of throttle. It's VERY predictable in a slide too.  Feels so progressive! People probably presume there's a 25 year old driving it based on my behaviour this week! 🤣
    • Yeah Jap import. Fairlady Z then! I'm a bit the same.  They've been on my radar for a fair while but then just impulsively decided to buy one!  Was going to just buy an NA and add turbos to it later but decided to save the f'ing around and just buy the turbo version. 
×
×
  • Create New...