Jump to content
SAU Community

Issues With Running Neo Pfc On S2 R33

AlexCim

By AlexCim,
in Engines & Forced Induction

 Share

Recommended Posts

AlexCim Grand Master

AlexCim

Posted
Posted

Ok, that topic will sound very VERY confusing, but here is the low down

-S1 Auto stagea has R33 S2 Engine

-Engine harness same as R34 GTT

I have bought a plug(to swap over) and PFC for R33 S2 thinking its right, but someones told me that the GTT PFC also works and doesnt require mods to the harness.

Are there any issues with running a NEO6 PFC on a NON NEO6 GTST.

RB30-POWER Mentor

RB30-POWER

Posted
Posted

because the nvct cam timing is constantly variable on the NEO rb25, can the PowerFC be mapped for this function, or how does that work?

with the r33 rb25 its either full advance or full retard no inbetween. and is activated by a simple on/off switch in the ecu at the desired rpm.

anyone know how the powerfc and rb25neo nvct perform?

RB30-POWER Mentor

RB30-POWER

Posted
Posted

its common knowledge that the powerfc lacks the outputs for auto tranny operation.

its also common knowledge that there is a specific version powerfc for the neo.

however what i was asking is how much control does the ne powerfc give over the nvct operation?

RB30-POWER Mentor

RB30-POWER

Posted
Posted

yeah, cheers mate.

ill head over and ask.

i suppose this is kind of relevant to the thread.

i mean, put all the auto issues aside, if it were capable of controlling the auto.

i dont think the R34 Neo would be able to control the r33 nvct very well.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Marek
      WGNC34 - floor mats

      By Marek · Posted

      Hi 🙋‍♂️. Just bought my Unicorn but the interior need some minor work so it would match my expectations ;). I noticed it is hard to get used oem floor mats in good condition so i started to dig if there's any chance to buy set of new ones. I found two websites - nengun and amayama and it looks like one can still buy factory new floor mats in Japan, but thers a small issue. Some mats (i assume genuine, oem ones) are marked as G4900 and these are "discontinued". The ones you can buy are marked as G4911 but i have no idea if these are also oem, made by other producer or some lower quality replacements that looks entirely different. Can anyone help? 😃  P.s. there is also some strange indication - 0V005, 0V015 and 0V505. Any idea what does it mean? Would appreciate any help with this 🙏
    • Marek
      Hi everyone.

      By Marek · Posted

      Hi, Marek here 🙋‍♂️. I finally fulfilled my longtime dream - recently bought Stagea and now waiting for it to arrive in Poland. There's only few of these in my country, and one of the owners  recommended mi this forum as a source of all the info i'd need since now i own one  so here i am.  
    • The Bogan
      NC MX5

      By The Bogan · Posted

      Version 1 aluminium airbox is.......not acceptable No pics as I "didn't like the look.....alot" Even after all my "CAD", and measurements, the leg near the fusebox just didn't sit right as it ended up about 10mm long and made the angle of the dangle look wrong, the height was a little short as well, meh, I wasn't that confident that Version 1 was going to be an instant winner I might give Version 2 another go, there's plenty of aluminium at work, but, after having in on and off a few times, and laying in the old OEM airbox without the new pod filter and MAF, there may be an option to modify the OEM air box and still use the Autoexe front cover and filter.... maybe This >  Needs to fit in here, but using the panel, and not the pod, the MAF will need to fit in the airbox though> I'm thinking as the old OEM box and Autoexe cover that is sitting in the shed is just sitting around doing nothing, and they are relatively abundant and cheap to replace if I mess it up and need another, it may well fit with some modifications to how the Autoexe brackets mounts to the rad support, and some dremiling to move it get in there, should give me some more room for activities, as I don't want to move the MAF and affect the tune Sealing the hole it requires to stick it in the air box is simple, a tight fit and some pinch weld will seal it up tight  I am calling this a later problem though
    • Dose Pipe Sutututu
      Ethanol Content Sensor - Always at 11%?

      By Dose Pipe Sutututu · Posted

      and it ends up being already priced in as though you're just on 91RON without any ethanol. Car will lose a bit of economy as the short and long term fuel trims bring down the AFR back to stoich or whatever it is for cruise/idle for the engine.  
    • soviet_merlin
      Ethanol Content Sensor - Always at 11%?

      By soviet_merlin · Posted

      Oh, you are right. But, in Australia E10 is based on 91RON fuel and ends up being 94RON. Hence it being the cheaper option for economy cars. The more performance oriented cars go for the 98RON fuel that has no ethanol mixed in. The only step up we have left then at some petrol stations is E85.
×
×
  • Create New...