Jump to content
SAU Community

Xenon Lights

RBLUV

By RBLUV,
in General Maintenance

 Share

Recommended Posts

someonestolecc Grand Master

someonestolecc

Posted
Posted

bosimporting is where I got mine from. Michael is a champ - just PM him his nick is BATMBL - just let him know you're from SAU.

r32's use all sorts of bulbs - the one I installed in my flatmates car use H3/H3C's (same as cefiro). I've also heard of H1's being used to make sure you check before you order.

Just make sure you be careful with the high beams - the r32 high beams turn off the normal lights. This is NOT good for xenons. (I told my flatmate not to use his highbeams. He's happy).

You'll also be pleased to know silvia/skyline/cefiro projectors work very well with aftermarket kits and mine produce almost no glare and almost no hot spots - good ol' Nissan over-engineering.

Also - 4300k is the optimum colour - I use 6500k and that's just tingey blue.

Link to comment
https://www.sau.com.au/forums/topic/93109-xenon-lights/#findComment-1685137
Share on other sites
Ronin 09 Grand Master

Ronin 09

Posted
Posted

I'm sacking the nissan projectors and retro-ing some Honda Euro HID projectors in... they're a bitch to do...

If anyone is interested, will post up some pics as I go.

Got the headlight apart at the moment, done some cutting of the euro HID projector and that's about it

Link to comment
https://www.sau.com.au/forums/topic/93109-xenon-lights/#findComment-1685210
Share on other sites
Ronin 09 Grand Master

Ronin 09

Posted
Posted

This should probably go in DIY, but:

Headlight apart (sorry no glass pics):

RetroHID00131.JPG

Chrome headlight cover (being sprayed matte black) :D

RetroHID00121.JPG

Standard projector on left, Honda Euro on right (already cut an 'ear' off it)

RetroHID00141.JPG

As you can the Honda projector is shorter, and mounts further forward. Will have to fabricate a bracket for it to fit the standard adjusters... (in progress)

Cutting ears off Euro projector

RetroHID0001.JPG

RetroHID0009.JPG

RetroHID0002.JPG

RetroHID0004.JPG

Because the new projector sits so far forward in the assembly, i may have to cut the rear of the housing off and move it further back. If that's the case I'll plastic weld on a bit of PVC pipe with a press-fit lid on the back. Also, I need more diameter than the standard rear cap to get my fingers in to get the bulb out :)

RetroHID0006.JPG

I'm moving REALLY slow with this and probably won't get it done until xmas... so stay tuned

Link to comment
https://www.sau.com.au/forums/topic/93109-xenon-lights/#findComment-1688462
Share on other sites
KILL HSV Proficient

KILL HSV

Posted
Posted

thats pretty cool about changing the pojector lights, but i can't be stuffed taking the time to do that

where does everyone buy their skyline light bulbs from? super cheap auto and repco don't have any that are the same as the jap ones.

i don't want to change it to hid or anything like that, i just want the brightest possible replacement bulbs, should i order them from nissan?

Link to comment
https://www.sau.com.au/forums/topic/93109-xenon-lights/#findComment-1691901
Share on other sites
The Dan Grand Master

The Dan

Posted
Posted (edited)

Nice work on the above. Good to see someone who will put in the time to try something new. Just becareful though because Xenon's are actually illegal here and so are modified lights that are not ADR approved. Not that any dumb cop is going to know the difference.

Edited by 3LIT3 FORS3
Link to comment
https://www.sau.com.au/forums/topic/93109-xenon-lights/#findComment-1692209
Share on other sites
Ronin 09 Grand Master

Ronin 09

Posted
Posted
Nice work on the above. Good to see someone who will put in the time to try something new. Just becareful though because Xenon's are actually illegal here and so are modified lights that are not ADR approved. Not that any dumb cop is going to know the difference.

thanks elite - that's why I'm keeping them 'OEM' looking... by day no one would know any different except for the black surrounds instead of chrome :D

Link to comment
https://www.sau.com.au/forums/topic/93109-xenon-lights/#findComment-1692848
Share on other sites
Ronin 09 Grand Master

Ronin 09

Posted
Posted

Update :cheers:

Inspiration struck... here is the old projector

RetroHID0015.JPG

Another view

RetroHID0017.JPG

disassembled

RetroHID0016.JPG

So i cut off the front lens side, so i can use the existing mount points, and just bond in the new projector :D

RetroHID0018.JPG

Trial fit :( is there nothing masking tape can't do??

RetroHID0021.JPG

back side

RetroHID0022.JPG

Trial fit again... stock you say...

RetroHID0024.JPG

Original...

RetroHID0026.JPG

New xenon trial fit ;)

RetroHID0025.JPG

Bored yet?? ...To be continued

Link to comment
https://www.sau.com.au/forums/topic/93109-xenon-lights/#findComment-1695889
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • joshuaho96
      Speed Sensor replacement

      By joshuaho96 · Posted

      Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • QB6SAGR
      Tein Circuit Master- rebuild worth it?

      By QB6SAGR · Posted

      Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
    • funkymonkey
      Howdy Y'all

      By funkymonkey · Posted

      Nice car! I’m glad folks in the US have gotten past the FnF and are buying real cool cars like the 260RS I was with a bunch of mates in Portland about a year ago and spotted a green Stagea (just a regular 2.5T AWD) parked about 2 blocks away and they were like “a what?” So I made a bet with them for a round of beers and said “ok one of you run down there and tell me if the steering wheel is on the correct side” 5 mins later the American comes trudging back up the hill and goes “he’s right guys. Ok what beer do you want?”
    • Dose Pipe Sutututu
      Starting again

      By Dose Pipe Sutututu · Posted

      Should replace OR drop the tank, give it's good clean. Might be worth replacing that entire fuel level/pump/cradle thing with this: https://frenchysperformancegarage.com/products/fpg-s13-180sx-r32gtst-single-pump-hanger-kit-billet-hat-6-v3-fpg-089?gQT=2  
    • R33_Guy
      Speed Sensor replacement

      By R33_Guy · Posted

      Thank you so much for the help
×
×
  • Create New...