Jump to content
SAU Community

Hpc

MRK25T

By MRK25T,
in Engines & Forced Induction

 Share

Recommended Posts

MRK25T Experienced

MRK25T

Posted
Posted

I'm thinking about getting come HPC coating done and want to do it all in one hit.

For me the HPC will serve 2 purposes:

1. reduce heat since i'll be running a bar or so of boost

2. It looks good.

What should I have done to cover both bases?

Will it give me a increase in performance?

What parts should I polish instead of HPC?

Lastly, i've never seen any pricing on HPC coating. What will it cost?

Mark

Link to comment
https://www.sau.com.au/forums/topic/9341-hpc/
Share on other sites
GTS-t VSPEC Grand Master

GTS-t VSPEC

Posted
Posted

Hi Guys,

I was looking at getting my exhaust manifold coated so I gave these guys a call, it's about $550 to get the exhaust manifold coated.

If your after serious performance then you should ceramic coat the exhaust manifold and turbo exhaust housing. HPC coat the intercooler pipes, most important is the intake manifold pipe.

I think that with a combination of HPC, cold air induction you will see a decent performance improvement due to the cooler intake temperatures. Don't forget that heat wrapping will provide similar results, but it doesn't look as good.

See'ya:burnout:

Link to comment
https://www.sau.com.au/forums/topic/9341-hpc/#findComment-140502
Share on other sites
sidewaymambo Mentor

sidewaymambo

Posted
Posted

I'm new to this process, but I understand the advantage of HPC and ceramic coat ( I always though that hot gas will run faster..), however does ceramic coat can apply on "any" surface? for example, I have a set of trust stainless manifold and mild steal..dump + front pipe, should I ceramic coat the them? or just the manifold?

I know the heat warpping, but does it capable to handle 1200+ temperture? thanks..

Link to comment
https://www.sau.com.au/forums/topic/9341-hpc/#findComment-140723
Share on other sites
Ronin 09 Grand Master

Ronin 09

Posted
Posted

I've just ordered a stainless dump pipe, and have a Trust mild steel front pipe. I called HPC (www.hpcoatings.com.au) last week and the guy quoted me $66 per foot for piping. I figured that because hot gas travels quicker, and the next main restriction is the cat, that this would be enough of the exhaust system to do.

PS they need 5 days to do the coating.

Link to comment
https://www.sau.com.au/forums/topic/9341-hpc/#findComment-140896
Share on other sites
GTS-t VSPEC Grand Master

GTS-t VSPEC

Posted
Posted

sidewaymambo,

You can ceramic coat just about any metal surface, if it has already been used then they will need to clean it and bake it so that the ceramic coat will stick. Ceramic coating is best for exhaust manifold, dump pipe, front pipe and turbo exhaust housing. I think if you want to do intercooler pipes then either use heat wrap or HPC.

The heat wrap will work fine in high temperatures like on your exhaust manifold, just make sure you buy the right stuff, and not some cheap brand.

See'ya:burnout:

Link to comment
https://www.sau.com.au/forums/topic/9341-hpc/#findComment-140901
Share on other sites
MRK25T Experienced

MRK25T

Posted
  • Author
Posted

Keep me up-to-date on any quotes you get for the HPC coating.

What sort of performance gains would I realise if I get the exhaust manifold, turbo exhaust housing and intake manifold pipe as VSPEC suggested? and has anyone got any ball park figures for this work - I cant call them while i'm at work.

I might leave them an email instead.

Mark

Link to comment
https://www.sau.com.au/forums/topic/9341-hpc/#findComment-141718
Share on other sites
Ronin 09 Grand Master

Ronin 09

Posted
Posted

I'm with steve. If we can organize a group 'coating' maybe it will be cheaper. I will call them tomorrow and see if they will do a group discount, and if so start a new thread and will try and organise it with HPC. Not sure how we can logistically do it - send all parts to me and then to HPC? or send them individually?

If i organise it probably keep it to the Vic boys and girls, just it is easier than doing everywhere. I will keep you posted, check here and if i start a new thread i'll link it to here.

Link to comment
https://www.sau.com.au/forums/topic/9341-hpc/#findComment-141955
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Latest Posts

    • 25zenki
      S1 rb25/s14 starting problem

      By 25zenki · Posted

      Maf is a question mark but TPS  I have set at 0.47, the fact that I’m getting proper voltage range out of it with the key on leads me to believe it’s functioning properly. I’m getting proper voltages on basically everything. I still need to look up voltage ranges for z32 maf and test that 
    • 25zenki
      S1 rb25/s14 starting problem

      By 25zenki · Posted

      Honestly no not at all, but it’s a very basic tune, it’s stock injectors q45 tps and z32 maf. Other than that it’s a completely stock base map. The file is from nistune and from my understanding if it was tune related I would be able to unplug maf and tps and it would still start even if it was a really shitty start. I have tried starting it with coolant temp, maf, and tps unplugged none of those 3 togethor or individually changes anything 
    • Matt Z
      SAU NSW - Bathurst Run 2025

      By Matt Z · Posted

      🏆 Skyline Supremacy Meets Mount Panorama Magic 🏆 Join SAU NSW as we take the long way to Bathurst, the home of GTR greatness. Saturday 30th August 2025 7:00AM Meeting Hanna Park North Richmond 7:30AM Departure Cruise Via Bells of Line Road 9:00AM Arrival to Stop 1: Golden Poplars Meadow Flat 9:45AM Arrival to Final Destination: Mount Panorama Motor Racing Circuit Meet Location: Hanna Park North Richmond Stop 1: Golden Poplars Meadow Flat Final Destination: Mount Panorama Motor Racing Circuit   *Disclaimer* There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAU:NSW event and will be run under a CAMS permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave.
    • soviet_merlin
      My BMW E39 528i touring

      By soviet_merlin · Posted

      What does it look like with highway driving? And yes, I had a similar thought as Duncan. It looks quite similar in my Stagea and I have made myself accept it as normal. Might have to look into it some day   Highway gets as low as 10l/100km on my end so I'm not as worried about it being a mechanical issue. More likely just the tune on the haltech.
    • OST Micah
      RH9 R32 GTR Build Thread

      By OST Micah · Posted

      While I was waiting for the new parts to come in for the charge pipe and radiator I decided to do some turbo modification. The drive pressure (exhaust backpressure) was a lot higher that I thought it should be. For 32lbs of boost drive was 55lbs. The turbine housing is a 1.10AR and my turbo builder has suggested to go to a 1.25AR. To test if a larger AR would do anything to reduce drive pressure AND not spend any money I decided to hog out the divider in my current housing. I removed it from the inlet and the whole way through the housing.  After reassembly and testing it doesn't look like this modification did anything for reducing drive pressure or requiring more fuel (making more power). Oh well, it was worth a shot. We'll get some data at the track if it makes it past the 60ft. I also machined a $7 shift knob off Amazon to fit my Stillway shifter since I didn't like the Stillway shift knob. Next on the list was the radiator replacement and fabrication of a new intercooler tube that had no silicon coupler. No pictures of this - I was short on time each night after work to get this done and didn't stop to take pictures.  Next was to get the clutch disks out and replaced. Previously when installing the dogbox I had ordered a set of the same sintered iron disks I had been running because I switched to the 26-spline input shaft. I thought it was odd that they didn't have any markings or brand name on them like all my old disks had but installed them anyway. At the track I could not get the clutch to lock up using my normal strategies. After two track nights I reached out to the clutch manufacturer and ask their thoughts. They said they had to switch the material out because they were having trouble getting the original material and that this new material would not take to being slipped very well.  So out with the first set of 26-spline disks and in with the correct material 26-spline disks. While I had the trans out I added an inspection/service hole. I've wanted one of these for a while. Now I can have a look at things and change the front cover shimming when needed (clutch wear). I hustled and got the clutch change done in a few hours on a Saturday. Hopped in the car and drove home. On the way home I did a 1-3 pull. When shifting from 2nd to 3rd the core plug in the back of the cylinder head popped out and dumped all the coolant. Thankfully I was only 30 seconds from home and coasted it there. Datalog showed nothing unusual and 2.5psi of coolant pressure. That plug has been in there since 1992 but I guess it worked its way out. Pulled the trans AGAIN and replaced the plug, JB welded it in, and made a brace. Also deleted the head drain I had added in during the bearing issue fiasco.  I am currently changing my boost control plumbing to make it cleaner. After that is done I'll make another attempt at getting past the 60.
×
×
  • Create New...