Jump to content
SAU Community

Recommended Posts

Item: Rb26 Engine

Location: Sutherland

Item Condition: Good condition

Reason for Selling: Project unfinished and run out of funds

Price and Payment Conditions: $5000 or $7500 with single turbo

Extra Info: see below

Contact Details: Brendan 0423 324 913, [email protected]

As i was unable to finish my rb26 project into my r32. I have put together a complete rb26 engine with or without turbo.

The engine consists of rb26 block, with full head, and sump, and with a custom made manifold to suit a GT3540 high mount. I will swap the manifold if need be to the single twin turbo one, but i dont have the turbos for that

Engine would consists of basically everything you need to drop this straight into a car. Engine will include brand new piston rings, brand new tomei metal head gasket 1.2mm. all pistons cleaned.

Whole engine cleaned ready to be used.

Prices: $5000 for engine with standard manifold no turbos

$7500 for engine with custom high mount manifold and GT3540 turbo and wastegate.

Will post interstate but at buyers expense

Located in Sutherland shire.

Brendan 0423 324 913

Edited by z3n2k
Link to comment
https://www.sau.com.au/forums/topic/95571-rb26-engine-5000/
Share on other sites

would u like to swap for an rb25det head compelet wit r33 loom coilpacks etc.. but no manifolds and a hks T51 rated at 800-1000hp + cash on top?

Edited by JETR-32
Link to comment
https://www.sau.com.au/forums/topic/95571-rb26-engine-5000/#findComment-1730146
Share on other sites

wat about a rb25/30det set up? and cash on top? if ur goin back to stock r33 and start from there this setup is unmoded u can start from scratch with dis... this set up is $1700 so if i give u $3300 on top for the rb26 wit no turbos + manifolds

let me know

cheers

bill

Link to comment
https://www.sau.com.au/forums/topic/95571-rb26-engine-5000/#findComment-1731524
Share on other sites

Engine will consist of, brand new piston rings, cleaned pistons, comes with tomei 1.2mm metal head gasket, all new gaskets. Turbo is in perfect working condition. Engine should run fine with no turbos.

everything cleaned and put back in all working condition.

Basically stock engine but cleaned and put back together.

Will ship interstate if required but at buyers cose

Link to comment
https://www.sau.com.au/forums/topic/95571-rb26-engine-5000/#findComment-1732048
Share on other sites

:( ohhhh.. in that case u should just buy an rb20de for a daily driver. u will get about 550-600km out of a tank wit that engine. it might have no balls but it will do the job
Link to comment
https://www.sau.com.au/forums/topic/95571-rb26-engine-5000/#findComment-1732104
Share on other sites

tru if anyone can find a rb20det for my r32 rolling shell let me know.. :(

need to sell my rolling shell as well r32 gtst with no engine

and i dont have the time to drop the rb26 into the r32

Link to comment
https://www.sau.com.au/forums/topic/95571-rb26-engine-5000/#findComment-1732109
Share on other sites

ive got a rb20det compelet has done 92xxx km's on it. runs like a dream. serviced every 5000ks.

if u want to swap for the rb20det for the rb26 wit cash on top let me know.

cheers

bill

Link to comment
https://www.sau.com.au/forums/topic/95571-rb26-engine-5000/#findComment-1739031
Share on other sites

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • A 1.5 way is a 2 way. It is just a 2 way with a less aggressive ramp on overrun.
    • The ABS and/or TCS being missing/broken will not cause the engine to misbehave. It just casues CEL to come on and annoy you. The CEL is useless if it is always on, so you have to do the things you have to do to get rid of it, so it can be useful. Being a Stag ECU, then yes, it will not expect TCS to be present. But it will expect ABS to be present and working. You will need to either make the ABS CU talk to the ECU (don't ask me what that will take on an NA R34), and make sure the hardware is working....or, you just need to blank it out in Nistune. Do not persist with the stock ECU. You will just have problems. Gte it Nistuned. Start from there. DO YOU HAVE A BOOST SENSOR? The ECU's boost sensor that it. It is connected to the loom at the rear of the coil cover. Usually rides on the firewall on an R34, but is usually bolted down to a bracket along with all the other crap at the back of the coil cover when a Neo is dropped into another car. If you do not have it, the ECU will shit the bed. So, do you have one?
    • So sadly the fuel pump etc was not it. The pump and filter is new and it is still cutting around 4000 rpm. A read something about ABS/TCS (engine is from stagea and ECU too so no TCS) and i dont know for 100% that my car has ABS. It has ABS "cube" in engine bay but i dont think it works(or at least from my braking experience). Can be something like that?  I will be driving the car next week to Nistune tuner to properly see what is wrong...  
    • the Tomei LSD fluid with lsd kit. frustrated that it was shaking the car to crap and affecting everything else negatively, I pulled the diff last night, and removed the lsd carrier, could not find anything wrong, however it seem to be 100 locked up acceleration, and deacceleration, wondering if they sent me a 2 way not a 1.5??  either way I installed the stock open carrier back in place. test drove everything smooth as butter again. no shake, shutter, random, what felt like clutch slip and grab or drive shaft play, etc. something differently wrong in side the lsd. I might bother taking it apart (if possible) to figure out what's going on inside this carrier, as bought too long ago to return.  only draw back is its back to a one wheel wonder.
×
×
  • Create New...