Jump to content
SAU Community

Recommended Posts

For sale: 98" Subaru Liberty Rx 2.5L na

Asking Price: $8,ooo Droped from 9,5oo(FIRM-need to pay the debt im losing so much money as is already, im desperate for a quick sale because i need a car to drive around for work :) )

Killometer's: 156,000

Manual or Automatic transmission: Automatic

Engine:

V4 2.5L Engine

Power 115kW @ 5600rpm

Torque 221Nm @ 4000rpm

Fuel Consumption City 10.4L/100km

Fuel Consumption Highway 7.3L/100km

ATTENTION

(The REASON for the price drop is that the gearbox leak has not been fixed BUT is driveable it has been quoted @ $300)

Modifications:

Momo Steering Wheel

17" my02 wrx rims

Xforce full exhaust

King lowered springs

Two brand new rear tires

Road Worth Certificate: NA (but can be organise for a little bit more, the car is now ok to pass rwc just for the gearbox leak

Registration: NA (also can be arranged for another 500 on top)

Crash History: This car has been in an accident with light frontend damage but has been fixed up by DT Panels, what happened was that the guy that i brought the car off was driving by a traffic light and then the old lady in front slammed the breaks as the lights went yellow and but he hit at a low speed - Inspection Welcome

Other Comment's about the vehicle:6 Speaker Stereo, ABS (Antilock Brakes), Adjustable Steering Col. - Tilt only, Air Cond. - Climate Control, Airbag - Drivers, Airbag - Passenger, Body Colour - Bumpers, Body Colour - Exterior Mirrors Partial, Body Kit - Lower (skirts, F & R Aprons), Central Locking, Cruise Control, Disc Brakes Front Ventilated, Disc Brakes Rear Solid, Fog Lamps - Front, Footrest - Drivers, Headrests - Adjustable 1st Row (Front), Headrests - Integrated 2nd Row, Independent Front Suspension, Independent Rear Suspension, Intermittent Wipers - Variable, Map/Reading Lamps - for 1st Row, Power Antenna, Power Door Mirrors, Power Steering, Power Windows - Front & Rear, Radio Cassette, Remote Boot/Hatch Release, Remote Fuel Lid Release, Seat - Drivers Lumbar Adjustment Manual, Seats - 2nd Row Split Fold, Sunvisor - Vanity Mirror for Passenger, Velour Trim, Woodgrain - Inserts in Door

Contact detail's Huynh - 0422675192

Im located in Springvale South

Edited by huynh
Link to comment
https://www.sau.com.au/forums/topic/95572-subaru-liberty-rx-98-9k-from-95k/
Share on other sites

Pic up

Rear bar has been resprayed (SSOOOOO shiny)

http://members.optusnet.com.au/thelefamily/Picture%20001.jpg

Front Bar has been replaced soo has the lh headlight plus the grille has been replaced

http://members.optusnet.com.au/thelefamily/Picture%20002.jpg

This is a picture of the engine bay which i took too close and i just realised when i went to upload these photos

http://members.optusnet.com.au/thelefamily/Picture%20003.jpg

This is the 02" WRX rims

http://members.optusnet.com.au/thelefamily/Picture%20004.jpg

Interior ( A bit dusty )

http://members.optusnet.com.au/thelefamily/Picture%20005.jpg

Side on view (the rear tires will be replaced)

http://members.optusnet.com.au/thelefamily/Picture%20006.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
    • You have a knack for photography my friend. It makes the 86 look like a complete bucket. The 34 went with you to Europe and back. It's special. (we all feel the same about our 'shitboxes' that every bystander seems to absolutely love)
×
×
  • Create New...