Jump to content
SAU Community

Recommended Posts

Hey guys just wondering on your opinons on the SAFC is it worth the cash im looking at getting 1 in the near future to fix my rich issues im having. Anyone care to comment on the good and the bad points.

I tried a search also but it came back with ones for sale thanks for your time helping out a newbie :D

Link to comment
https://www.sau.com.au/forums/topic/96769-apexi-safc/
Share on other sites

Yeah see thats the thing. I was interested in a power FC but ive had conflicting reports about it not working with the A-LSD computer. Id rather keep my A-LSD and have a SAFC then buy a power FC and loose it.

Thats the reason why I want to know the good and the bad.

Thanks

Link to comment
https://www.sau.com.au/forums/topic/96769-apexi-safc/#findComment-1758859
Share on other sites

A SAFC will ony adjust your fuel ratios and will not adjust ignition timing so only minimal power gains are achieved however it will save you fuel and therefore money at the pump. Prob better to get a power FC and get it tuned once properly rather than running two computers also Pfc are proven power achievers. Also you should prob get your SAFC or Power FC tuned after you put your front mount on.

Edited by LANFOH
Link to comment
https://www.sau.com.au/forums/topic/96769-apexi-safc/#findComment-1764206
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Will have a look at that. I cant see any leaks 
    • Put another overflow bottle (ie, a 1.25 coke bottle or similar) under the overflow hose and see if it is being pushed out there or if it is disappearing into the engine.
    • Staring on a stand is no issue. You just have to wire everything up, give it fuel and cross your fingers that the stand is robust enough. Arranging the inlet plumbing is often the hardest part, without any surrounding structure to hand some of it from. No need for coolant if you only want to run it for <1 minute. As to the gearbox - I think the little Aisin box is a bit stronger than the other small Nissan boxes that went behind SRs, but I wouldn't be too keen to test its limits with the torque of a boosted 25. I don't know if you can retain the box and the tailshaft. The box won't connect to the RB without an adapter of some sort, which is either a plate that will push the engine forward (which is not good for fitting it into the bay's available space) or push the box back, which messes with the box position and tailshaft length - OR - cut and shut work on the bellhousing, which is a long way from "least modification". I'd be buying a new 370Z 6 speed or similar, doing what has to be done to that to make it fit RB (ie, cut and shut bellhousing) and the requisite tailshaft custom/mods.
    • Hi Everyone I am from West Pennant Hills in NSW. Been too busy until recently to attend to my RB25DET Series 2 engine until recently. I am planning to stick it into the S15 shell at this stage, unless a nice SR20DET turns up... For now, i am going to try and get the RB25 running and working well then decide what gearbox to use. My preference is to retain the SR20DET  6 speed gearbox and tail shaft to retain as much and least modifications as i can avoid. I am an old guy and won't be doing any heavy drifting so i don't need a bullet proof gearbox Does anyone have experience with starting the RB on a stand? I got everything setup as much as I can with the info i can find... endless searching and videos on Youtube I would be great to get some pointers Cheers Songo
    • Hey all, Recently have had my s1 r33 gtr serviced and noticed my coolant reservoir was topped up to the max line. Took the car out for 1 yesterday and noticed today the reservoir is completely empty.  Any ideas? Radiator is full
×
×
  • Create New...