Jump to content
SAU Community

Recommended Posts

With replacing your injectors with larger ones, what do you plan to use to tune them? Does anybody know if you can get your stock ecu remapped - and if their is any downloadable 'tuning' programs you can use with the skylines? I know honda you can tune the ecu yourself with hondata. or urberdata...

Dayne

Link to comment
https://www.sau.com.au/forums/topic/96928-which-one/#findComment-1758940
Share on other sites

hey b-man long time no hear .

yeah been busy with other stuff work wise etc.

which state are you in Lo r33.

the rb25de has smaller injectors than the rb25det.

the e-mange is ok. re remapping the rb25not atm but dr-drift in melbourne is looking into it he can actually get an r33 to run ith a stock rb20 ecu for more info http;//www.dr-drift.com

jsut dont forget when you do the turbo conversion to retart the timing quite a bit initally.

cheers

Link to comment
https://www.sau.com.au/forums/topic/96928-which-one/#findComment-1759610
Share on other sites

Im located in canberra, i have an rb20e skyline - wasnt planning on anything just curious as to how people go about re-mapping stock ecus (like they can do to hondas). Though if i turbo'd the engine before upgrading i was just curious to see what i could possibly use to tune it, so far i was thinking ecu remap, or e-manage but i dont know if they offer a harness that would adapt to the rb20e. (SOHC)

Dayne

Link to comment
https://www.sau.com.au/forums/topic/96928-which-one/#findComment-1760513
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
    • Nice car! I’m glad folks in the US have gotten past the FnF and are buying real cool cars like the 260RS I was with a bunch of mates in Portland about a year ago and spotted a green Stagea (just a regular 2.5T AWD) parked about 2 blocks away and they were like “a what?” So I made a bet with them for a round of beers and said “ok one of you run down there and tell me if the steering wheel is on the correct side” 5 mins later the American comes trudging back up the hill and goes “he’s right guys. Ok what beer do you want?”
    • Should replace OR drop the tank, give it's good clean. Might be worth replacing that entire fuel level/pump/cradle thing with this: https://frenchysperformancegarage.com/products/fpg-s13-180sx-r32gtst-single-pump-hanger-kit-billet-hat-6-v3-fpg-089?gQT=2  
    • Thank you so much for the help
×
×
  • Create New...