Jump to content
SAU Community

Recommended Posts

Item: 1990 UZS131 Toyota Crown VIP

Location: Gold Coast

Website: http://www.boostcruising.com/forums/index....906&sectionID=6

Item Condition: VGC

Reason for Selling: Moody.

Price and Payment Conditions: EOI atm price around $13k or serious offers/trades.

Extra Info: 1990 UZS131 Toyota Crown. Full Junction Produce bodykit with custom moulded wing, Junction Produce bonnet emblem, Garson "Deep Racing" chrome wheels measuring 18 x 11 on the front and 18 x 12.5 on the rear with -22 offset. Motorvation is 1UZFE 4L quad cam V8, until is successor the 3UZFE, these were the toughest built factory engines in the world. come standard with 6 bolt mains forged rods, forged crank etc etc. Exhausts escape via custom 3 inch stainless straight through system into twin 3 inch tips (no mufflers). Suspension is factory airbags with aftermarket controller most of the photos are on the medium and not low setting. :P Interior is pretty much stock standard at this stage, why mess with a good thing? Comes standard with electric tilt/asjust column, electric seats both front and rear, electric lumbar support, heated seats during winter, fridge in the rear parcel shelf, seperate radio and aircon controls front and rear. Custom steering wheel and white painted dash. Sound System consists of at this stage double din tv/satnav setup, dvd player, cd changer (not installed) Alpine speakers front, rear and parcel shelf (front/rear splits in doors). Does not come with Number Plates shown. Car won "The Luxury Lowrider" award at AutoSalon this year. Car is NOT complied or registered. First person to ask if it has a RWC gets mod review until the next Ice Age. Have Import Approval papers here. Am looking for serious offers around the $13k mark, or perhaps trade for 180/silvia/ceffy/laurel/r32 4 door/tow truck. This car is completley unique, there are only another 6 in Aus I am aware of, and cannot be bought into the country anymore even under SEVS. Will be a unique cruiser and certainly turns heads. Do not screw me around, I have no patience for stupidity nor ridiculous offers.

Pictures: pim9579ne.jpg

pim9553xa.jpgcrownautosalonreardish8zj.jpg

Contact Details: Pm me here.

Link to comment
https://www.sau.com.au/forums/topic/97230-vip-crown-jap-import-v8/
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Before I commit to it as I already have the wastegate off the car, would you change it to the 9psi spring instead of the 12, or whack it back on now and try your suggestion?   Edit: Actually I might just swap the spring and see what the logs say after another few pulls, as we know it's still spiking without the Mac valve in the picture so I need more data without the Mac valve trying to combat the issue.
    • Sounds good Hmm suppose the main thing is, how much do you care about this car? The filler doesn't make for a very good water barrier lol. If there was a tiny little bit of rust forming now, that in 3 to 5 years time becomes obvious under the paint (starts to bubble up), would it bother you? 
    • I already have the ability to datalog the voltage... what I can't do is correlate it to what the gauge is showing when I'm looking at the data at a later date. Or something like this. Except getting the oil to 125C+ involves me going 200+kmh at the track so you can imagine this is a little tricky unless I do something like note what the voltage is when I am at the top of 5th gear so I have a point to reference on. Drove car today. O2 still reading richer because hopefully not a leak instead of massive restriction I've introduced. Car really doesn't sound like a LS. It's quite strange. Pulled a bit of fuel out up top. This does potentially explain why my spark plugs looked like the car was running pretty over-rich. If I was tuning it to a ~12.7 which in reality was far richer than that in the past. It will be handy to have the dyno WB to compare my WB to to compare notes that's for sure. At this point I'm happy to just sit in the passenger seat and tune the thing given I've got about 7 million hours on the platform lol.
    • Yeah I understand you have to pay for an updated map or subscription service or something. But I can't even find a current map for Australia. My map is dated 2017, but didn't this car version still sell in Australia until 2021?   Also, just as an aside, the navigation system warns you of traffic incidences ahead.....why would they include that on a map they knew is not receiving live information. I am forever going to be warned of an incident that probably existed for 30 minutes 8 years ago.
    • Car has been sold and I am now selling leftover parts. Prices are non-negotiable as I will sell to my mechanic if it won't sell here. Prices are firm except for the Random Parts listed at the very bottom. All parts are genuine except for the S-Tune front bumper. Volk Racing TE37SL 19×10.5″ +12 5×114.3 pressed graphite with P-Zero 275 30 19 tyres [USED] $4,500 Wheels are in perfect condition, have been sitting in my garage for the past 6 years. Tyres still have 90% tread, but since they're now old, I would not recommend you drive hard on them. K-Sport Super Sport External Reservoir Coilovers (made to order) [NEW] $2,500 Front spring rate 14kg, Rear spring rate 7.5kg Fork Type. You can read all about it here (https://www.k-sportracing.com/product_detail.php?Key=12). I was going to start tracking the GTR, but never got around to it. Paid $3500 (after USD conversion and taxes). HKS Kansai Service Tower Bar [NEW] $500 Never fitted in the original Japanese box. R34 GTR S-Tune Fibreglass Bumper [NEW] $500 No mesh - No Box - No damage - just dusty. Nitto RB26 Clear Timing Cover [NEW] $50 Couldn't fit RB2630 due to bonnet clearance. HKS Piping Kit Special Type (BNR34) & Apexi Power Intake Air Filter Kit & Password JDM Adapter [USED] $1,000 Missing some rubber hoses and supports, but you get what you see. Nismo NE-1 Weldina Turbo Back Exhaust & Custom 3.5"straight pipe [USED] $1,000 Needs some love, but perfect for those who want to go back to OEM+. Bayside Blue Aluminium Vspec Bonnet/Hood [USED] $700 Came off my GTR. Unfortunately, the tips have been slightly ground down. It will need some repairing. Bride Low Max Super Seat Rails [USED] $350 The price is for both sides. Will post pictures when I get a chance. Random Parts [USED] - negotiable Standard rb26 cams (intake and exhaust) $10 Stock amber front indicators $10 Standard GTR bumper lower side grills $10 Stock amber side indicators $10 Nismo Sports Resetting ECU $50 Water reservoir $10 Stock airbox mouth $10 Stock fuel rail $10 Stock coilovers from R34 GTR Vspec $100 PM me which items you are interested in. I do work 9-5, so I will be responding daily at best. Best time for pick up is after 5 and before 7 on weekdays, or i can work something out on weekends. I will only accept cash or PayID. Pick up only - located Epping NSW area.
×
×
  • Create New...