Jump to content
SAU Community

Recommended Posts

Hey,

Im in the market for a 34 and just wanted to know when inspecting one what to look out for.

I currently have a 32, if I was to buy another one or help a mate look for one there are certain things I would look out for. Varing from cosmetic, interior and mechanical due to the nature of the specific car.

Once you own a certain car you notice and learn certain parts about them that start to deteriorate etc.....

While knock on wood that you haven't, would just like to know from you guys, if theres anything, even if little.

Thanks in advance.

Link to comment
https://www.sau.com.au/forums/topic/97953-calling-on-34-owners/
Share on other sites

Had mine since almost new, now done 42K and as the above post says, it's time to replace the coil packs. Will be replacing mine with Splitfires. Other than that, generally a pretty good vehicle if they are maintained well. As most Skyline owners will tell you. Keep to regular service schedules an you won't have any problems. The coil packs are the first thing (other than blown bulbs) I had play up.

Cheers

Muz

mines done 60k+ only had the 02 sensor replaced, *touch wood* coil packs are still in good order. I get awesome mileage which is a bonus for a skyline owner. Apart from that try and find a stock example with low kays and you should be alright.

Ive had mine about 10 months now, in that time the list of dramas has been as such;

- Shorts killing tail lights (3 of them, before the dealer finally fixed the short)

- Leaking master brake cylinder

- Leaking shocks

- Siezed turbo

Apart from that she's been great, and I do push her pretty hard on occasion, so the more serious of above repairs isn't too surprising I guess. Most of my friends who I take for a ride comment on how much like a brand new car it is, despite 8yrs old now, so as mentioned above, stick to regular service intervals, and you should be pretty right.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • That's not a transistor --- it's marked ZD1 which makes it a zener diode. As to what the breakdown voltage is, not enough there to divine.
    • Hi all, Long time since I've posted here. Looking for some advice on what I can remove to further identify the cause of my issues.  I can move the passenger seat forward and back but the knob used to adjust the seat angle is pretty much free spinning, there's very little resistance.  Removing the side cover I can see that the chain is intact but the shaft for the adjustment spins without the gear attached to it moving.  What's my next step for disassembly here? Is this a common fault? Just being a little cautious as I didn't want to start removing bolts for a spring to fly out or something equally as stupid.  Cheers
    • The incentives are mostly the same, yes. Ethanol is cheap compared to the cost of doing 98-100 RON with crude oil alone. 87 to 93-94 AKI all with E10. In 2020 Canada mandated E10 as a part of their "renewable fuel standard" and is supposedly going to go to E15 in 2030. In California where there are only 8 refineries with two threatening to shut down next year it's been over 20 years now of E10 and 91 AKI maximum because there's just not enough refinery capacity or crude oil supply relative to the demand for premium unleaded fuel. And CARB's low carbon fuel standard means functionally none of the diesel available at the pump is made from crude oil anymore. It's almost all entirely 20% biodiesel blended with 80% renewable diesel (hydrotreated vegetable oil) now. The number of gasoline vehicles that support E15 or higher ethanol concentrations is surprisingly low, I can't imagine it being wise to play tricks like this without flex fuel sensors in most of the fleet.
    • It's almost certainly the same as the one next to it. Have a fish around amongst these hits https://www.google.com/search?q=surface+mount+transistor+m33&sca_esv=9cb49794e0b2005d&source=hp&ei=2vJ5aNjTB7Kw0PEPldnS8QM&iflsig=AOw8s4IAAAAAaHoA6qkfmF6XcygtrZ4Vu9f92NXF_RFd&ved=0ahUKEwjYqIPP7MWOAxUyGDQIHZWsND4Q4dUDCA8&uact=5&oq=surface+mount+transistor+m33&gs_lp=Egdnd3Mtd2l6IhxzdXJmYWNlIG1vdW50IHRyYW5zaXN0b3IgbTMzMgUQIRigATIFECEYoAEyBRAhGKABMgUQIRigAUjKCFAAWABwAHgAkAEAmAHfAaAB3wGqAQMyLTG4AQPIAQD4AQL4AQGYAgGgAuYBmAMAkgcDMi0xoAfMBLIHAzItMbgH5gHCBwMyLTHIBwU&sclient=gws-wiz
    • South Australia, which is hardly as far behind as the rest pf Oz makes out, and who is also not a paragon of progressiveness (read that as over-legislation) in the area of vehicle standards, has this to say on the subject: Adjustable coil-over suspension Aftermarket adjustable coil-over suspension components are suspension units that incorporate an external thread on the main body and corresponding threaded spring saddle that allows the vehicle's suspension height to be varied. If fitting aftermarket or coil-over suspension components you must submit an Application to modify a light motor vehicle form and a report from a light vehicle engineering signatory (LVES).
×
×
  • Create New...