Jump to content
SAU Community

Recommended Posts

  • 8 months later...
  • 2 weeks later...

I had hicas but put in a S13 non hicas rack. The factory powersteering lines wont mate up so i ripped them all out and got custom ones made. Because I had a hicas pump i took the back off it an ripped out the vanes so the bitch wouldnt pump out the rear stage. I bunged it up too :)

JK

Link to comment
https://www.sau.com.au/forums/topic/98896-power-steering/#findComment-2458922
Share on other sites

Hella Flush so your sayying that a s14 steering rack goes straight into a cefiro with out any mods :S I find this a little different as i didnt think that s13 an s14 steering racks where the same. Not that im a silvia person unless it has 4doors and drifts it aint worth having. Cant wait for next yrs super drift rds im guna burn the candle for the cefiro crew

Link to comment
https://www.sau.com.au/forums/topic/98896-power-steering/#findComment-2500183
Share on other sites

as we are on the topic of power steering, i just wanted to know if the powersteering pump from the ca18det engine/s13 would work on the rb20e engine/a31, it looks the same but i just wanted to confirm this, could anyone help

thanks

Link to comment
https://www.sau.com.au/forums/topic/98896-power-steering/#findComment-2507476
Share on other sites

wait... on my 32 the front rack is completely seperate to the hicas rack, there is no plumbing between them.

on my friends CA silvia there is a connection that is bolted to the rack, but no fluid is mixed here.

i found this out when i locked the hicas on both cars so both definitely had hicas.

hicas cars have a pump that has 2 outlets and then the resevoir has 2 inlets, so the front rack and the hicas rack are completely seperate all the time.

i dont understand how a non hicas rack can be different then, cos i've definitely never seen any connections on the rack for hicas. rack has 2 connection, 1 in, 1 out

Link to comment
https://www.sau.com.au/forums/topic/98896-power-steering/#findComment-2510229
Share on other sites

are you talking about the connections near the uni joint? where the steering shaft goes in? cos this isnt actually hydraulically connected, its just bolted on there.

just checking, ive never done it on a31 but i assume its the same as s13 as the solenoid setup looks the same from the top

Link to comment
https://www.sau.com.au/forums/topic/98896-power-steering/#findComment-2518998
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Actually everyone on the roads was really well behaved. The only person that did any minor tailgating was a local hoon in a Turbo Focus. Unfortunately we weren't going the same way so there was no grand initial D touge battle. Lots of people pulled over and let me through. The amount of "Hey man nice car, omg skyline, nice 34 man woo" was suprising. Like really suprising. Like almost annoying. My partner was obviously surprised, she'd never seen anyone in the real world point out the car/like the car/want to chat about the car before, so to have like 3 people per day mention it was notable, I could finally say SEE? SOMEONE THINKS THEY'RE COOL. Everyone was also pretty suprised about the weather. Every day was dry and about ~13-14C. Mount Wellington had a sign that said they close the gates at 9pm and I was heading up there at about ~7:30. It was VERY apparent that conditions were getting significantly worse by the minute on the way up and down. The road on the mountain was terrible though, it's no driving road. I have various suspension related questions now. Luckily it was only about 20 minutes from where we were staying to the top of the mountain as said Google maps. We only had the 2 nights in Hobart. We went to the Farm Gate Market though which was really good - And went down to the Hastings Thermal springs/caves down there during the day. I'd definitely be up for going back again, so luckily there's a few more sights yet to see. Didn't get to do the west coast/queenstown/cradle mountain so this was supposed to be a 'scouting' trip anyway of sorts if I were to one day do/take part in/organize a more car-focused trip. As for the boat, it wasn't bad. Well it was bad, but not in the way you're thinking. We did the night trip which leaves at 6:45 (though you have to be there ~2 hours earlier) and arrives the next morning at about 6am. There is nothing to do on the ship. If you plan accordingly and bring a book/tablet/show to watch/charger you can just chill out, take some Travacalm and just sleep through it. The food there is an extremely basic buffet that costs $32 a plate, or $14 for a $3 pizza. The way back we had a travel kettle and a few different types of cup noodles and made our own tea/coffee in the room. This was a far superior way to do it. At the very least book one of the rooms with beds. I guess as we were in the off season we didn't have room mates. You get an option for rooms with 4 beds (2x bunks) or a room with just the two bottom beds. There's also some option for a deluxe queen bed but it's much pricer. We've been on sleeper trains in Asia before so we figured this is similar (and it was)
    • You just gotta be really, really, really clear and decisive with what you want your end product to be. 99% of people who want this conversion aren't "I want to run a 295 front tyre!" so they don't really need the widebody. They just want the OEM body to look a little less dumpy, so bonnet, bar, skirts job done with some camber, stretch, slam. It's when you want that, but then decide to pivot later you get big problems. See also if you're willing to get an all in one fibreglass bar, and you're willing to accept fibreglass problems like cracking the entire item on a driveway, instead of just a piece attached to the bottom, etc etc etc. Decide this all before buyin'.
    • After @Kinkstaah debacle, I'd never want to try and get it right 😛
    • The hood lines up with the fenders. The front bar doesn't perfectly line up with the fenders where the wheel arch is. You have to 'squeeze' the front bar 'in' as it wants to naturally flare out and be longer on the sides. There's a few threads where people notice this when they only swap a GTR style bumper and front bar. Unless you have genuine OEM items - you may be better served getting conversion kits. There are GTT bumpers to fit GTR hoods. There are GTR hoods (non genuine) to fit the GTT bracketry. MAY  
×
×
  • Create New...