Jump to content
SAU Community

Recommended Posts

Well it’s been 6 weeks of cold the sphincter of the universe without my trusty MADGTR. Since blowing her up at Eastern Creek she has sat cold and alone in my mates workshop. I have all my parts except a pair of variable cam sprockets. Apparently they are in the country but I do not have them in my hot little hands so it makes no real difference where they are.

God I cant wait to get back behind the wheel, not that my borrowed Festiva does not have enough power to pull the skin off a bowl of custard, its just I miss the feel of a good car.

I wonder what you guys think I will dyno once I have the all the new mods in?

Performance Mods,

Old: Power FC, custom FMIC, boost to 16lb, steel wheel turbo's Nismo 80mm Exhaust cat back. High flow panel filter. KW= about 200KW @4W

New: High flowed 47.5mm compressor turbos, HKS Dump pipe, larger 6lt highflow cat, 550cc inj, variable cam sprockets, Apexi boost kit to 17lb.

NON Performance mods

Sump Baffle, head restrictor, metal Head, Inlet and Outlet gaskets, Triple core Radiator, oil cooler.

So what do you think?

Link to comment
https://www.sau.com.au/forums/topic/989-i-want-my-gtr-back/
Share on other sites

yeah babs is right on it may be 250-260. I know the cold the sphincter of the universe feel I had a month with out my baby as well.

you appreciated even more. my wife was heard mumbling a couple of days later I really miss this can and I love it.

And my wife in definatly not a rev head

meggala

Link to comment
https://www.sau.com.au/forums/topic/989-i-want-my-gtr-back/#findComment-20932
Share on other sites

  • 2 weeks later...

Update.

All parts are in and the donk has the baffles, metal gaskit, head, turbo's, inj back on, and is ready to be bolted back in today. Fingers crossed I can go for a drive on Sat.

I hope the car is ready to be driven because I ready to go drivin.

Link to comment
https://www.sau.com.au/forums/topic/989-i-want-my-gtr-back/#findComment-25735
Share on other sites

Big diff rwkw and 4wkw, and Im sure I could get a lot more out of the engine,but im not sure the donk would last with the hard track work around the creek. Maybe I should spend the money that Mario has and end up with 800Kw?

Link to comment
https://www.sau.com.au/forums/topic/989-i-want-my-gtr-back/#findComment-25764
Share on other sites

A HKS 3037 is a mother of a turbo somewhat like a GT30 and being newer it probably flows alot better then GTR turbo's and spool faster relatively.

250 4wkw is alot of power it would be around 500hp - 550hp at the crank ! have a look at a list of super cars and tell me how many cars have around that much power.

Link to comment
https://www.sau.com.au/forums/topic/989-i-want-my-gtr-back/#findComment-25852
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I'm seeing torque specs all over the place for the OUTER tie rod, but none for the INNER tie rod, where it connects to the steering rack. Even in videos, people are just tightening em up as much as they can with a wrench and that's it. Anything tightened down without torque makes me nervous. Anyone know what the spec is for it?
    • Hope you had a great time here in our tiny country.   The JDM scene we have here is quite small, it's mostly BMW, Volkswagen with burble tunes haha. But the few JDM cars we do have in the scene are pretty nice. Some of my friends drive cool s14's too. Both built engines, red one makes abt 500, blue one abt 400 i think?
    • Ye good idea , would have never thought of something like that. Might aswell do it to every pulley and the balancer while I’m there 
    • Use an LS1 or similar, via kit like Frenchy's. But.... It's probably not the alternator. It sounds like belt squeal, which would be because the pulleys are glazed. Rub every groove on the pulleys with 120 grit paper. Report back. Oh, and new belts afterwards too. The old new ones will be shitted up already.
    • Hello all I have 2 r34 sedans , one turbo one na, only recently aquired the na 34.  Man what is with these things.... My turbo 34 started sounding like a super charger, it was screaming at anything above 4000rpm , I took the alternator apart and replaced the front bearing which is the only one I think you can access and it did not fix the issue so presumably the bearing in the rear of the alternator is gone. ( diagnosed it was the alternator by taking off the aux belts one by one to figure out which pulley or bearing it was )  My friend gave me one he had lying around, Installed it , it did not squeal for maybe 500kms and now its started to squeal again briefly on startup  Recently got an na r34 and I replaced the timing belt, water pump + all the auxillirary belts. Runs amazing but it suddenly developed the same squeaking problem but significantly worse, Ive had my neighbour come down screaming at me because it was waking her up everytime I moved the car. It takes a good 2 minutes before it quietens down.  Im yet to diagnose where its coming from but im fairly sure its coming from the alternator aswell. My question isnt about how to fix it but rather where can you get a new alternator for an rb25 neo??? Ive searched everywhere but I havent been able to find a direct fit oem type replacement thats not genuine. All the automotive stores sell an oex one - BXA035 - which I picked up for cheap through a friend with staff discount , got it home only to find the connector is completelty different.... As far as im aware bxa035 is for rb20/30's and after a bit of figuring out the bxa035 has an ev14 type connector, which is tiny compared to the rb25 connector. I actually had an ev14 connector lying around which I was considering just replacing the bigger plug with to get the alternator working but the bxa035 is rated for 70amp vs the rb25 alternators are 90amp ( or so ive been told ? ) That paired along with the fact im about to install an amp + sub in the back and I have the stock sized small battery Im not sure itll do the job unless anyone has another opinion?  I know and have seen all the websites selling the ls1 alternator conversion kit but I am not going down that route, nor do I have the money to. Hopefully I can figure out how to get 2 brand new alternators for both cars. I would buy second hand which there seems to be many of but considering how common this seems to be im sure If I installed a second hand one it would start squealing in no time  Or even better if anyone knows how to fix the issue directly with the alternator itself... Any input appreciated Thank you     Link for bxa035 connector picture
×
×
  • Create New...