Jump to content
SAU Community

285/30/18 Bridgestone Re55S, 295/30/18 A050 Soft, 255/40/18 Ad08


Recommended Posts

Hey Guys

I have a couple of sets of 285/30/18 Bridgestone RE55s available.
These are brand new, old stock. 2010 dated. Has been stored at Bridgestone until they cleared out the last of their RE55s.

They are the SR2 Compound (medium)

$250 each

Available for pickup from our shop in Bayswater, Vic

Can ship Australia wide. Adelaide or Sydney, $65 Brisbane - $80, Perth $120

Send me a message with your postcode for a quote elsewhere.

-----

Used 295/30/18 Yokohama A050 - soft compound.
This is time attack/hill climb type rubber where you need it grippy from the get go.
2012 dated and still very fresh. Quite a bit of tread left. $700 the set (close to what a new set would cost PER TYRE!)

--------

Brand new 255/40/18 Yokohama AD08

These are 2012 build

I have six available at $250 each - probably the best bang for buck street tyre

Good option if you were looking at a 265/35/18 as these are as wide as most 265/35/18

---------

post-58515-0-71048400-1404696248_thumb.jpg

post-58515-0-00839200-1404696250_thumb.jpg

post-58515-0-44511800-1404696251_thumb.jpg

post-58515-0-79094300-1404696252_thumb.jpg

post-58515-0-46698400-1404696464_thumb.jpg

post-58515-0-17820500-1404696466_thumb.jpg

post-58515-0-55951900-1404696467_thumb.jpg

post-58515-0-16114100-1404696469_thumb.jpg

post-58515-0-70647000-1404696470_thumb.jpg

post-58515-0-21380300-1404696472_thumb.jpg

Link to comment
Share on other sites

 Share



  • Latest Posts

    • A creative mounting location would be from the roof. We totally need to bring back ludicrous stereo designs from AutoSalon days...
    • don't do. Fricken typos. Make me look like the sheeple.
    • I could show you guys photos of wrap having been removed properly, and where the wrap was removed, paint underneath is perfect. Sections of the vehicle didn't have wrap on it, and in those areas, the paint work is destroyed because of how long it had been sitting in the hot QLD sun for many many many years. Wrap even still looked decent. Good quality wrap, and removing it properly shouldn't rip off the paint work, unless the paintwork was already shot to pieces before hand.
    • Any write ups on replacing the window motor?  I've never messed with them (or window regulators) before.   Ever since I've had the car, the driver window would roll down just fine, but most often I'd have the try a few times to get it to go up.  As soon as it started to go up, it always goes up smoothly and quietly.  Seemed like a bad switch.  But now, its stuck in the fully down position and won't come back up.  I get =12/-12V coming out of the relay/amp when pressing the switch up/down.  So the switch and amp are working.  Just a bad motor.  I've also applied 12V directly to the motor and nada.   Any help on replacing the motor?  Can the glass and regulator stay in, and only replace the motor?  Or not possible?  Thanks!!!
×
×
  • Create New...