zacariah

I don't think you can get E85 in Perth yet, but i think i'll just end up going with 650cc-850cc injectors. where'd you find the intake pipe?

What mods have you done to your car george?

I'm not sure what sort of power my is currently making, but i guess it's probably a bit under 200rwkw? So i think i'd be pretty happy with 280rwkw. If i went with the PU 0.82 hiflowed turbo, new injectors, z32 and a tune. it would be good for around 280rwkw? Later on down the track if i wanted more, would i be able to just change the manifold and get an ext wastegate, right?

What would i need to do to get around 280-300rwkw z32 650cc injectors low mount manifold with an external wastegate turbo? What turbo should i be looking at for that?

Haha sorry, I did mean turbo. I have an Apexi power fc ecu, and there are a couple of tuners around Perth that tune them, So i'd stick with that, So i guess i'd need a Z32 What would the 650cc injectors be good to? Also, what about dump pipes and that sort of thing?

Thanks, I don't really know anything about injectors, what size would you recommend? Or is it dependant on the size of the turbo? I'm not after that much more power, i still want the car to be reliable, well, as reliable as a skyline can be. Any turbos/injectors you'd recommend looking at? Or informative threads. Edit: Does anyone know much about the Hypergear hiflow exhausts?

Sorry, i should of listed the modifications, Apexi ecu Front mount intercooler Sard fuel pressure regulator Walbro 550 fuel pump Blitz Electronic boost controller H&R coil overs An aftermarket clutch has also been fitting by the previous owner, i'm not sure what type. It does feel pretty tight and firm though. What do you think i should do from here? Z32 and new injectors?

Hey everyone, It seems a few of the manifold studs have snapped, as theres is a really loud exhaust leak from the engine bay, So i've decived i'll take it in and get a few other things replaced/fixed at the same time exhaust manifold rocker cover gaskets possibly rear wheel bearings I'm just wondering if theres anything else i should look at having done while the exhaust manifold gets done, cause i'm guessing the turbo and everything will have to come out? good time for a turbo upgrade?

I'm having the same sort of problem, car won't idle, misfires, heaps of black smoke. I haven't even tried to drive it, won't hold revs. The day before i took the coil packs out and taped them up, to fix a miss at boost, which it did fix. gave it a bit of a hiding and the next day it wouldn't run. just put a brand new set of yellow jackets in there, changed plugged, can't find any cooler leaks or vaccuum leaks. cleaned the maf just about ready to try get it towed to a mechanic

I'm going to assume it's a series 1.5, series 1 body, series 2 engine. Just want to try and make sure before i spend 4-500 on a new set of coil packs.

I know that, i'm wondering if theres a difference between the S2 coil loom and the r34 neo loom? As the loom on my car looks exactly like the loom for the neo, but i can't find any pictures of a S2 loom.

How can i tell what motor it is?

So i've got a series 1 gtst skyline, and i've been having some trouble lately with the car blowing a heap of black smoke, and not idling. I had pulled the coil packs out and taped them up the night before (which fixed the miss) but the next morning the car wouldnt idle and is just running really rough, too rough to try drive anywhere. I checked all the intercooler pipes, and could't find any leaks. I picked up a second hand set of series 1 spitfires, with the loom. the loom is a lot different to mine, and doesn't fit, and the spitfires don't fit into my loom. So i'm guessing someones put a series 2 engine in there? Basically i'm just wondering what the series two loom looks like, and if theres anyway i can make these spitfires work with it. The series 1 loom has a long skinny connector that connects to an ignitor mounted ontop of the cover right? This is what mine looks like That one is apparently from an r34 rb25det neo

Hey guys, can i get a check on this ECR33057734 thanks.

Hi, I'm looking for a cheap set of second hand working coil packs to buy, or even to borrow if your in perth, just so i can check if it's the coil packs that have failed.