The Dan

The new indy blues or the old indy blues?

Not good Duncan. Happy to give advise if I can. Shoot me a pm if you want me to call you and talk about the results tomorrow

Why is the limit of stock internals 275rwkw? Had them safely running at 375rwkw for ages. There is no difference between an engine build for 250rwkw and 350rwkw. Basically you can choose forged rods etc but if you put them in regardless all up you'd be looking at around $10k for that type of build with all the parts supplied

Read up guys.....already been covered

Is it possible he needs to re-install flash on his browser or something? Or does the emoticon thing work in a different way?

Yeah coz you're as old as f**k and have no idea how to operate a computer

You can have her. She's got a face like a bulldog chewing on a wasp

Inaccurate device pinging me for 133 in a 110 when I was only doing 110 not a concept you understand?

As a matter of fact I would urge everyone to visit the website http://www.aussiespeedingfines.com Read the articles and make up your own mind. The speed guns aren't accurate, they don't meet the standards required in the National Measurements Act and they are not being used in accordance with the manufacturers instructions (ie. device connected to a shielded power supply instead of into the cig lighter like they do) Speeding is a factor in less then 5% of fatal accidents. Refer to the national crash stats if you want to see for yourself. Revenue raising is a croc of shit. Start fighting back. Have personally fought and won against 3 so far

Just let me know if you need the letters Noel. Any photo taken of your car can't be used in evidence in court anyway because they use an MD5 encryption. MD5 encryption can be hacked (see google) so all you will have to do is tell them to prove the photo wasn't tampered with.

If you had to pay to download it then I'm sure you'll be in breach of their copyright disclaimer. Be careful distributing this in a public forum

Yeah Garrett in their infinite wisdom decided to change the oil drain side to T28. As stated above you'll need to file them out to match the other holes. You may also note that one of the comp cover bolts will foul on the oil drain. IF you don't grind an angle on the head of the bolt it will stop the oil drain from sealing properly so make sure you do that as well

I would recommend 8-10 hours including the swap over off oil and water line fittings. 10 hours would allow for small setbacks like seized nuts or other such things. Generally you can expect $800-$1000 plus any parts used Then for the tune they will need time to install the chip and tune it. You'll need to leave it for about 2 days to get the tune right usually but sometimes an additional day might be required. Total time I would say 3-4 days for everything

I noticed that my warn status is not currently representing my badass nature. Something around 30% should be fine. Thanks

Incorrect. There is no pleasing some people

Yeah, you guys are yet to add the 'Awesome' tag next to my name. Other than that and the PM's not working, looks f**king great. f**king sensational job done by the admin here!

+50 on more clean and professional. Looks way more modern. Some old people may have a cry about it though :casts fishing line:

ooh scathing remarks from the guy who didn't read his comment properly stepped in a doo doo there!

lol no but that's funny anyway. Marko's a nice guy! Why would you say such things?

Is the 34 running -5's? And they are on race fuel aren't they? Last time I was out at Russels they had drums of Sunoco or Martini or something like that

Proof please

The LSD is activated by a hydraulic pump. It has a motor. Should be located in the Driver's side rear of your car on the underside (directly below the fluid reservoir) Check it or change it if it's broken. Have you tried bleeding the system?

The powerFC get's it's reading from the Coolant Temp Sensor. If the sensor is faulty, then so are your readings. You can buy them from Repco or Autobarn for about $30 and I have replaced dozens due to them being faulty. If you haven't replaced yours yet, chances are it's faulty also. I would start there before running around trying to find an issue that might not be there

As a friend once said to me - anything that runs on Atari software can't be THAT bad!!

have you tried answering the question?